PERFORMANCE WORK STATEMENT.docx

STATEMENT OF WORK

FOR

Airman & Family Readiness Carpet Installation Building 1249

1. SCOPE OF WORK. The contractor shall provide all personnel, equipment, tools, materials, supplies, labor, supervision and other items and services necessary to remove and install new carpet at the Airman & Family Readiness Center. All work shall be accomplished in accordance with industry standards. Contractor shall notify the Contracting Officer ten (10) days prior to the start of work. The government will perform inspection of contractor’s work. Authorized personnel from 37 CES/CEOE Maintenance Engineering will perform acceptance of all work.

2. SPECIFIC TASKS. The contractor will perform the following task:

a. Move – All furniture items will be lifted and moved out and placed back when work has been completed in that area.

b. Demolition – Take-up/Remove current Carpet, Rubber Cove Bases and any underlining materials throughout the Airman & Family Readiness first and second floors, to include stairways, and haul away debris.

c. Install – Level out and prep floors for new carpet installation. Install approximately 908 square yards of Modular Carpet Tiles. Apply 4” Rubber Cove Base along the walls where existing cove bases were removed. Place Flooring Transition Strips in all areas where carpet meets another material.

Contractor shall furnish documents stating details of factory warranty on all materials used.

3. HAZARDOUS AND/OR TOXIC MATERIALS. A hazardous material (HAZMAT) is one that poses a risk to the health and safety of the public, and/or the environment if not properly controlled during the handling, storage, manufacture, processing, packaging, use, disposal, or transportation. Hazardous materials may be elements or compounds, and can be found as gases, solids, liquids, or a hazardous material (HAZMAT) is one that poses a risk to the health and safety of the public, and/or the environment. Hazardous chemical are defined under Sec.1910.1200(c) of Title 29 of the Code of Federal Regulations.

3.1. Contract shall identify and report HAZMAT usage to the HAZMAT Pharmacy according to local procedures. All HAZMAT brought to the job site shall require the contractor to fill out an AF Form 3952 for each item for submission to the Hazardous Material Pharmacy. Additionally the contractor is required to submit Material Safety Data Sheets (MSDS) as directed by the clause entitled Hazardous Material Identification and Material Safety Data (FAR 52.223-3). The Contractor shall submit a actual usage report of all hazardous/toxic materials brought onto the base during the preceding job to the HAZMAT Pharmacy (IAW AFI 32-7086, Hazardous Material Management). The phone for the Lackland AFB Hazardous Material Pharmacy is 671-5389/0332 for more information.

4. SECURITY AND CLEAN UP. Contractor’s passes are issued at the Main Gate Visitor Reception Center (VRC). Prime contactor must submit a letter to the Contacting Officer requesting visitors or vehicle passes. Procedures for the letter, outlining the issuance of passes will be given after contract award. Contractor shall secure and control all tools and material during work and ensure it does not present a safety hazard at any time. The contractor is responsible cleaning up job site and for hauling away debris on a daily basis.

(Coordinate with 37CES/CEOE, Mr. Tim Tant 671-7215).