5 Axis IDIQ Appendix E Ecospeed F1540 Tool List.pdf

PDF 170 KB Posted

Attached to
Starrag 5 Axis Computer Numerical Control (CNC) Machines Federal contract opportunity
Solicitation number
FA812521R0008
Issued by
Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

Written by GovTribe AI ·

This document contains an appendix listing tools required for a solicitation seeking Starrag 5 Axis CNC Machines. The appendix provides a list of tools including shrink chucks, holders, arbors, mills, drills, and other equipment. Key details include part numbers and quantities for each tool, with notes that toolholders must be fitted with Balluff chips and rebalanced after chip installation. The related solicitation is for an IDIQ contract for Starrag 5 Axis CNC Machines to be delivered to Tinker Air Force Base in Oklahoma. Interested vendors must submit any questions in writing two days before the closing date listed on the first page, and submit quotes on or before the closing date. Responses should include company information, a wet signature, pricing on specified pages, and completion of fill-in provisions and clauses. The soliciting agency is the Department of the Air Force under the Materiel Command Air Force Sustainment Center.

View the file

Other files for this federal contract opportunity

Other files attached to Starrag 5 Axis Computer Numerical Control (CNC) Machines, newest first.
File Type Posted
5 Axis IDIQ Appendix J - STC1000 Threaded Top Tombstone.pdf PDF
5 Axis IDIQ Appendix L - STC1250_1250X Threaded Top Tombstone.pdf PDF
5 Axis IDIQ Appendix F - STC1250 Accessory List.pdf PDF
5 Axis IDIQ Appendix C - Safety.pdf PDF
Solicitation - FA812521R0008.pdf PDF
5 Axis IDIQ Appendix H STC1250X Accessory List.pdf PDF
5 Axis IDIQ Appendix I Ecospeed F1540 Accessory List.pdf PDF
5 Axis IDIQ Appendix G STC1000 Accessory List.pdf PDF
5 Axis IDIQ Appendix B STC1000 Tool List.pdf PDF
5 Axis IDIQ Appendix A STC1250 Tool List .pdf PDF
5 Axis IDIQ Appendix D STC1250X Tool List.pdf PDF
5 Axis IDIQ Appendix R - Ecospeed F1540 Proposed Layout.pdf PDF
5 Axis CNC Standardization_Class JA_Redacted.pdf PDF
5 Axis IDIQ Appendix O - Post Processor Test Part Drawing (Ecospeed F1540).PDF PDF
5 Axis IDIQ Appendix K - STC1000 Square Tombstone.pdf PDF
5 Axis IDIQ Appendix S - STC1250 Proposed Layout.pdf PDF
5 Axis IDIQ Appendix Q - STC1000 Proposed Layout.pdf PDF
5 Axis IDIQ Appendix P - STC1250X Proposed Layout.pdf PDF
5 Axis IDIQ Appendix M - STC1250_1250X Square Tombstone.pdf PDF
5 Axis IDIQ Appendix N - Post Processor Test Part Drawing (STC Models).PDF PDF
5 Axis IDIQ Statement of Work Rev.4.pdf PDF
Show all 21

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

5 Axis IDIQ Appendix E – Ecospeed F1540 Tool List

Description Part Number QTY

1/4” Power Shrink Chuck 5”L A63/80.144.1/4z.3.i 5

5/16” Power Shrink Chuck 5”L A63/80.144.5/16z.3.i 5

3/8” Power Shrink Chuck 5”L A63/80.144.3/8z.3.i 10

1/2” Power Shrink Chuck 5”L A63/80.144.1/2z.3.i 10

5/8” Power Shrink Chuck 5”L A63/80.144.5/8z.3.i 10

1/4” Power Shrink Chuck 3”L A63/80.145.1/4z.3.i 5

5/16” Power Shrink Chuck 3”L A63/80.145.5/16z.3.i 5

3/8” Power Shrink Chuck 3”L A63/80.145.3/8z.3.i 10

1/2” Power Shrink Chuck 3”L A63/80.145.1/2z.3.i 10

5/8” Power Shrink Chuck 3”L A63/80.145.5/8z.3.i 10

3/4” Power Shrink Chuck 3”L A63/80.145.53/4z.3.i 10

1” Power Shrink Chuck 3”L A63/80.145.1z.3.i 10

1/8” Power Mini Shrink Chuck 6.5”L A63/80.182.1/8z.8.i 5

1/4” Power Mini Shrink Chuck 6.5”L A63/80.182.1/4z.8.i 5

5/16” Power Mini Shrink Chuck 6.5”L A63/80.182.5/16z.8.i 5

3/8” Power Mini Shrink Chuck 6.5”L A63/80.182.3/8z.8.i 5

1/2” Power Mini Shrink Chuck 6.5”L A63/80.182.1/2z.8.i 5

1/8” Power Mini Shrink Chuck Fitting Sleeve 80.105.14.2.04 10

1/4” Power Mini Shrink Chuck Fitting Sleeve 80.105.14.2.09 10

5/16” Power Mini Shrink Chuck Fitting Sleeve 80.105.14.2.10 10

3/8” Power Mini Shrink Chuck Fitting Sleeve 80.105.14.2.11 10

1/2” Power Mini Shrink Chuck Fitting Sleeve 80.105.14.2.12 10

ER16 Holder 2.95L A63/80.025.16.3 10

ER16 Holder 5.12L A63/80.024.16.3 10

ER25 Holder 2.95L A63/80.025.25.3 10

ER25 Holder 5.12L A63/80.024.25.3 10

ER32 Holder 2.95L A63/80.025.32.3 10

ER32 Holder 5.12L A63/80.024.32.3 10

3/4" Face Mill Arbor A63/80.050.3/4z.i 3

1” Face Mill Arbor A63/80.050.1z.i 3

Balance Screws 80.203.00 2

Cool Flash 91.100.40 20

Coolant Tube 85.700.63 150

Power Collet Chuck Torque Wrench 84.600.00 2

3/4” Face Mill Arbor Wrench 84.400.22 3

5 Axis IDIQ Appendix E – Ecospeed F1540 Tool List

1” Face Mill Arbor Wrench 84.400.27 3

3/4” Face Mill Arbor Balancing Index Rings 79.350.50 20

1” Face Mill Arbor Balancing Index Rings 79.350.60 20

3/4” Face Mill Tightening Bolts 85.300.22 10

1” Face Mill Tightening Bolts 85.300.27 10

1/2” Shrink Fit Extension 1/8ID 6.3L 78.1/2Z0.1/8Z.2 5

1/2” Shrink Fit Extension 3/16ID 6.3L 78.122Z0.3/16Z.2 5

5/8” Shrink Fit Extension 1/8ID 6.3L 78.5/8Z0.1/8Z.2 5

5/8” Shrink Fit Extension 3/16ID 6.3L 78.5/8Z0.3/16Z.2 5

5/8” Shrink Fit Extension 1/4ID 6.3L 78.5/8Z0.1/4Z.1 5

3/4” Shrink Fit Extension 1/4ID 6.3L 78.3/4Z0.1/4Z.1 5

3/4” Shrink Fit Extension 3/8ID 6.3L 78.3/4Z0.3/8Z.1 5

1” Shrink Fit Extension 3/8ID 6.3L 78.1Z0.3/8Z.1 5

1” Shrink Fit Extension 1/2ID 6.3L 78.1Z0.1/2Z.1 5

1” Shrink Fit Extension 5/8ID 6.3L 78.1Z05/8Z.1 5

HSK A 63 Spindle Wiper 85.820.63 2

HSK 63 Coolant Tube Wrench WRENCH COOL TUBE HSK 63 2

2” 90 Degree Face Mill HM390 FTD D2.00-5-.75-15 5

3” 90 Degree Face Mill HM390 FTD D3.00-6-1.0-15 5

0.413” Inserted Drill 3 x Diameter DCN 0413-124-063R-3D 10

0.413” Inserted Drill 5 x Diameter DCN 0413-206-063R-5D 10

0.492” Inserted Drill 3 x Diameter DCN 0492-147-063R-3D 10

0.492” Inserted Drill 5 x Diameter DCN 0492-246-063R-5D 10

0.551” Inserted Drill 3 x Diameter DCN 0551-165-063R-3D 10

0.551” Inserted Drill 5 x Diameter DCN 0551-275-063R-5D 10

0.866” Inserted Drill 5 x Diameter DCN 0866-433-100R-5D 10

½” Reamer Shank RM-BNT5-8D-.625C 5

Each toolholder listed in bold text shall be provided with a BIS-C-122-04/L Balluff chip installed The Balluff chip shall be secured to the tool holder with Haimer Data Lock technology, P/N 91.100.06. The tool holder shall be rebalanced after the Balluff chips are installed.

File details come from the government source that posted it. Updated .