43120201 data.pdf
PDF 196 KB Posted
- Attached to
- ELECTRODE Federal contract opportunity
- Solicitation number
- SPMYM225Q0551
About this file
This is a Material Ordering Data sheet for MIL-E-23765 specifying requirements for welding electrodes and rods. The document details ordering specifications for Type 70S-3 welding electrodes with a diameter size of .045 inch, to be supplied on 11-12 lb. spools with 8" flange. Key requirements include Level C packaging, special marking requirements, and the need for both argon plus 2 percent oxygen weld test and carbon dioxide weld test. The electrodes must conform to MIL-E-23765B general specification dated August 22, 1985 (with Amendment 1 from September 15, 1989) and MIL-E-23765/1E detail specification.
First Article Testing and alloy identity testing are not required. All unit, intermediate, and shipping containers must be marked according to MIL-STD-129, with additional instructions provided in DLA Procurement Note C20. The document specifies IDN N4523A 4312-0201, with ICN 38RNO99225, KO S03, and KOI 053. The material is to be shipped FOB Destination to Bremerton, WA, as indicated in the associated contract opportunity SPMYM225Q0551 from Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM225Q0551U0001 ELECTRODE.pdf | ||
| 43120201 cdrl 2.pdf | ||
| 43120201 cdrl 1.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-E-23765
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 4312-0201
ICN: 38RNO99225 KO: S03 KOI: 053
MIL-E-23765B Paragraph 6.2 Ordering Data (general specification)
a. Title, number, and date of this specification: MIL-E-23765B, Electrodes and Rods - Welding, Bare, Solid and Alloy Cored; General Specification for, dated 22 August 1985, Including Amendment 1, Dated 15 September 1989.
b. Title, number and date of the applicable detail specification: MIL-E-23765/1E, Electrodes and
Rods - Welding, Bare, Solid and Alloyed Cored, Ordinary Strength and Low Alloy Steel, dated 23 August 1985, Including Amendment 1, Dated 15 September 1989
c. Type: 70S-3 Form: Other (see Additional Requirements block) Diameter Size: .045 inch
d. Whether First Article Test is required: NOT REQUIRED
e. Whether alloy identity testing of each electrode or rod after final marking is required:NOT
REQUIRED
f. Length of rods required: N/A
g. Level of packaging and packing required: C
h. Special marking required: YES
Additional Requirements: SEE BELOW
MIL-E-23765/1E Paragraph 6.2 Ordering Data (detail specification)
a. Whether the copper and phosphorus content should be restricted: N/A.
b. If mechanical properties of weld metal as-deposited are other than as specified: N/A.
c. If neutral granular flux is to be used other than as specified: N/A.
d. For electrode types MIL-70S-7, -8, and -9, whether the holding time at temperature for the stress relief treatment should be in accordance with 3.4.1.2(a): N/A
e. For electrode types MIL-70S-1, -2, -3, -4, -5, and -6, whether the tests shall be conducted in the stress-relieved condition in accordance with 3.4.1 and 3.4.1.2: NOT REQUIRED
And If so whether the holding time at temperature should be in accordance with 3.4.1.2(a) or 3.4.1.2(b): N/A
f. Whether SAW in combination with any neutral granular flux or GMA welding process should be used with item (e) above: N/A.
g. Whether only the argon plus 2 percent oxygen weld test or
MATERIAL ORDERING DATA
MIL-E-23765
only the carbon dioxide weld test is required for 70s-2, 70s-3, 70s-4, and 70s-6.
h. Other base metal steel for use in tests, if required: NOT REQUIRED.
i. Level of packing required: C
j. For level A packing, if bags or drums are required: N/A
k. If required, whether bags or drums should be palletized for: N/A
l. If use of polystyrene (loose-fill) material is required shipment: N/A.
Additional Requirements: SECTION G, BOTH THE ARGON PLUS 2 PERCENT OXYGEN
WELD TEST AND THE CARBON DIOXIDE WELD TEST ARE REQUIRED.
WELDING ELECTRODE, BARE, .045" DIA. X 11-12 LB. SPOOL (8" Flange)
All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129.
Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Kara Rush
Code: 250.7
File details come from the government source that posted it. Updated .