36C26118Q0532-003.pdf

36C26118Q0532

Line # Qty Description

Brand Name

Manufacturer and

Part Number

1 2

Chair, Bench, Locker

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall dimensions: 48 inches (") width (w) x 10" depth (d) x 19" height (h) (+/- 3") so that it may fit into the space and design of the area

• Freestanding, shall not require bolting to the ground for stability for safe use

• Hardwood top

• Metal legs

• Factory applied finish -- electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion, and scratch resistance

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Top: Clear maple or equivalent

- Base: Brushed stainless or silver/grey powdercoat

CH01

2 15

Chair, Conference

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall dimensions: 25"w x 25"d x 37-40"h (+/- 3") so that it may fit into the space and design of the area

• Standard height range piston

• Five (5) star base with castors for hard floors

• Upholstered seat with mesh back

• Fixed height arms, integral with frame

• Adjustable seat height

• Greenguard indoor air quality certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• All fabrics shall be bleach cleanable with a ten to one (10:1) water to bleach solution

• Finishes:

- Arm plastic: standard black

- Base: standard black powder coat paint

- Mesh back: tan

- Upholstery: graded in, three (3) grades above base grade for a coated fabric)

- Caster: black

• Style and finishes shall match with other conference room furniture

• All finishes must be selected and approved by the VA interior designer

SECTION B -- SALIENT CHARACTERISTICS

This is a Brand Name or Equal solicitation. Salient characteristics and brand name manufacturers with associated part numbers are listed below. Line item numbers on quote(s) shall correlate with the line item numbers in the matrix below, or quote(s) may be determined nonresponsive. All furniture shall conform to the fit, form, and function of the design(s) of the VANCHCS facility where it will be installed, as described below, and all items shall be designed for use in an industrial environment.

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Highmark, HB

OR EQUAL

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Image is representational of general design intent.

CH02

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

3 40

Chair, Dining

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 24” depth; 24” width; and 33" height (+/- 1.5"); 29 lbs so that it may fit into the space and design of the area

• Rated up to 250 lbs load, minimum.

• Nylon Plastic Shell

• Polished Chrome 4-leg base

• Perforated seat design aesthetic and bucket seat shape

• Stacks at least five (5) chairs high

• Floor saver glides

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Plastic frame: grey

- Base frame: polished chrome

• Style and finishes shall coordinate with dining table and outdoor furniture

Image is representational of general design intent.

CH03

4 4

Chair, Dining, Barstool

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 17” depth; 20" width; and 30" height (+/- 1.5"); 1/2" thick (+/- .25") so that it may fit into the space and design of the area

• Rated up to two hundred and twenty-five (225) pound (lb) load, minimum.

• Chrome tubular steel

• Molded veneer seat

• Stacks at least four (4) stools high

• Floor saver glides

• Cantilevered design and sled style base shall allow for stool to be hung from a bar height table to keep floors clear for cleaning

• Waterfall edge on seat

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable

• All finishes shall be bleach cleanable with a ten to one (10:1) water to bleach solution

- Upholstery: natural ash

- Base frame: chrome

Image is representational of general design intent.

CH04

Loewenstein, Caprice

OR EQUAL

Peter Pepper

Products, STACKR

30"h Stool

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

5 9

Chair, Patient, Bariatric

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 26” depth; 34.5” width; and 33" height (+/- 0.5"), weight seventy-two (72) lbs so that it may fit into the space and design of the area

• Seat depth 18.5"; seat height 19"; arm height 25”; (+/- 0.5")

• Rated for five hundred (500) lbs

• Three hundred and sixty (360) degrees clean-thru design

• Upholstered seat and back

• Wallsaver design

• Non-marring adjustable glides

• Durable metal frame with polyurethane armcaps, which feature antimicrobial properties

• Greenguard indoor air quality certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Arms: black polyurethane

- Frame: warm grey

- Upholstery: Graded in, three (3) grades above base grade for a coated fabric

• Style and finishes shall match with "chair, patient, mid-back"

Image is representational of general design intent.

CH05

6 51

Chair, Patient, Mid-back

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 26” depth; 25” width; and 33" height (+/- 0.5"), weight sixty (60) lbs so that it may fit into the space and design of the area

• Seat depth 18.5"; seat height 19"; arm height 25”; (+/- 0.5")

• Rated up to four hundred (400) lbs load, minimum

• three hundred and sixty (360) degrees clean-thru design

• Upholstered Seat and Back

• Field replaceable components

• Wallsaver design

• Non-marring adjustable glides

• Durable metal frame with polyurethane armcaps, which feature antimicrobial properties

• Greenguard indoor air quality certified

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• All fabrics shall be bleach cleanable with a ten to one (10:1) water to bleach solution

• Finishes:

- Arms: black polyurethane

- Frame: warm grey

- Upholstery: Graded in, three (3) grades above base grade for a coated fabric

• Style and finishes shall match with "chair, patient, bariatric"

Carolina, Silver Ion

Metal

OR EQUAL

Carolina, Silver Ion

Metal

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Image is representational of general design intent.

CH06

7 50

Chair, Task

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 21.75"-24.5” depth; 27” width; and 38.5"-43.5" height, (+/- 1") so that it may fit into the space and design of the area

• Seat Depth 15.75"-18.75"; Seat Height 15.5"-20.5"; Seat Width 19.25", (+/- .5") so that it may fit into the space and design of the area

• Arm shall have height (4" range), depth (3" range),width (4.5" range), and pivot (30° range) adjustability; (+/-

.5") so that it may fit into the space and design of the area

• Weight capacity of four hundred (400) lbs

• Upholstered seat and 3D knit back over plastic outer back and outer seat

• Recline angle of ninety-five (95) degrees to one hundred and twenty (120) (+/-5°) for comfort

• Seat shall have waterfall edge to reduce pressure on user's thighs when sitting for prolonged periods

• Seat depth adjstability, standard, with minimum three (3)" range

• Flexible back construction designed to move with the user's spine

• Adjustable lumbar support, standard, with five (5)" range

• Adjustable firmness of lower back support

• Upper back force adjustability

• Five back recline step positions

• Five-arm base with two and one-half (2 1/2)" soft casters for use on hard floors

• ANSI/BIFMA furniture sustainability standard level three (3) certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• All fabrics shall be bleach cleanable with a ten to one (10:1) water to bleach solution

• Finishes:

- Back Upholstery: graded in, standard knit mesh

- Seat Upholstery: Graded in, three (3) grades above base grade for a coated fabric

- Frame: champagne metallic powder coat

Image is representational of general design intent.

CH07

8 13

Clock

Salient Characteristics: To include minimum of the following specifications:

Peter Pepper

Products (Clock -

343)

OR EQUAL

Steelcase, Leap

(462 Series)

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Dimensions and Features

• Overall Dimensions: twelve (12) diameter (+/- 1") and 1.5" depth (+/- 0.25") so that it may fit into the space and design of the area

• Lightweight modern design

• Thin edge

• Bezel finish: Aluminum

• Clock face: White with black graphics, large simple to read hour numbers with minute tick-marks

• Face cover: Glass

• Face: Large numbers, twelve (12) hour

• Movement: Quartz battery movement

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Frame: Brushed aluminum

Image is representational of general design intent.

CL01

Peter Pepper

Products (Clock -

343)

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

9 50

Computer Mount, CPU

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: fits computers that are 12"-20"h x 3.6"-9"w

• Accomodates CPUs weighing up to 50 lbs

• Maintain convenient access to ports and drives

• Allow for quick hardware upgrades and repairs

• Under desk mount with 360-degree swivel mount

• Adjustable mounting plate to ensure CPU is centered and balanced

• Tool free installation

• Durable, easy-to-clean exterior composed of aluminum, high-grade plastic

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Frame: white/silver

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

CM01

10 17

Computer Mount, Monitor, Double

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 35"w x 8.5"d x 15.5"h (+/- 4"), 18.5 lbs so that it may fit into the space and design of the area

• Support for dual monitors, up to 24" and up to 25 lbs each

• Clamp mount to worksurface

• Provide handle below monitor to adjust monitor without grabbing screen

• Quick and easy connection or disconnection of monitors to the device

• Height Adjustable

• Depth Adjustable

• Pivot Adjustable

• Angle Adjustable: Tilt: +10º/-90° for easy access to cable connections, Pan: 175°

• Rotation Adjustable: 360° portrait to landscape

• Integrated cable management

• Shall match style of double monitor arm

• Durable, easy-to-clean exterior composed of aluminum, high-grade plastic

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Frame: Silver

Image is representational of general design intent.

CM02

Humanscale

CPU600

OR EQUAL

Steelcase Eyesite

Double Display

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

11 33

Computer Mount, Monitor, Typical

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 10"w x 8.5"d x 15.5"h (+/- 4")

• Support for a single monitor, up to 30"

• Clamp mount to worksurface

• Configuration shall prevent monitor arm from extending beyond back surface of desk (e.g. abutting sit-stand table shall not hit an overlapping monitor arm while it is being raised)

• Provide handle below monitor to adjust monitor without grabbing screen

• Quick and easy connection or disconnection of monitors to the device

• Height Adjustable

• Depth Adjustable

• Pivot Adjustable

• Angle Adjustable: Tilt: +10º/-90° for easy access to cable connections, Pan: 175°

• Rotation Adjustable: 360° portrait to landscape

• Integrated cable management

• Shall match style of double monitor arm

• Manufacturer must offer a minimum 5 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Durable, easy-to-clean exterior composed of aluminum, high-grade plastic

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Frame: Silver

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

CM03

Steelcase Eyesite

Single Display

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

12 12

Desk, Office

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 72"d x 66"w x no greater than 64" h (+/-2") so that it may fit into the space and design of the area

• Desk layout shall be per attached supplementary drawings so that hand of desk and electrical stub-ups are in adequate locations; verify all dimensions in field prior to order, manufacture, and installation

• Desk shall be comprised of a system of coordinating parts and panels for a complete look

• Desk shall have provide power at worksurface height and shall provide cable management

• Power shall be provided to the desk at adjacent walls with standard outlets

• Service parts must be available

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Bullet Shaped Table Worksurface

• Overall Dimensions: 30"d x 66"w x 29" h (+/- 3") so that it may fit into the space and design of the area

• Bullet shape with square edges so that it may fit into the space and design of the area

• Features T-shaped support on return side, curved end with post support on other to provide knee clearance from both sides of worksurface

• Space under the work surface shall be completely free of obstruction and support for the fixed height worksurface shall be accomplished with perimeter edges of the desk or storage units

• Worksurface shall have grommets for cable access and wire management

• Worksurface shall have antimicrobial features molded into the desk components using silver ion or similar technology

• 3/4 Box/File Return

• Overall Dimensions: 15"w x 18"d x 21"h (+/- 2") so that it may fit into the space and design of the area

• Rectangular return with square edges, attach to Bullet worksurface for L shaped desk configuration

• One larger "file" drawer, one smaller "box" drawer configuration, attached to the underside of the desk return;

leaves a clear space below drawers for easy cleaning

• Include Box drawer divider and pencil tray

• One lock shall lock all drawers, and shall be front-removable to simplify field changes

• All pulls shall comply with current ABA codes

• Drawers must feature heavy-duty steel drawer suspensions which allow drawers to open their full depth

• Highback Organizer

• Overall Dimensions: 14.63"d; 56.63"w; 37.13"h, (+/- 3"); worksurface clearance 19 3/4"h

• Designed to be installed on top of desk components; include mounting brackets or other hardware for stable and safe installation

• Back of unit at worksurface shall be enclosed and shall feature a tackboard and tool rail

• Storage shall be lockable with hinged, sliding, or flipper doors (which can be leveled)

• Fully finished on all sides

• HIghback organizer unit shall be lockable and key core shall be front-removable to simplify field changes

• Wherever door or drawer pulls occur directly next to each other, provide ample clearance for fingers at all times

• Where occurs, flipper door shall recess into the outer shell of the flipper unit to allow top most surface of the unit to remain undisturbed.

• Highback organizer storage shall have a back panel to prevent items from falling behind the desk unit

Tackboard/Tool Rail

• Shall feature a slat-style (or other type) tool rail to accomodate organizational accessories, to include pencil cup, file sorter and paper tray at minimum

• Item shall coordinate with and install seamlessly with furniture upon which this is to be placed

Task Light

• Shall provide a dimmable LED task Light under flipper storage unit

• Under cabinet light shall be affixed magnetically or otherwise to provide flexibility in depth placement by the user

• LED, UL LIsted

• Switch: single touch on/off; Dimmable, touch-and-hold, 15%-100% continuous with last state memory

• At least 50,000 hours lifespan

• Color temperature: 3500K

• Screw and Magnetic Mounting kit included

• 12' with 60-watt power supply

• Daisy chain capable up to 6 fixtures

Carolina Pulse, Kimball Priority, Steelcase, Haworth, Herman Miller

Task Light: Reed-

Premier, Linear LED

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Technical Specification and Code Requirements

• Table units meet or exceed ANSI/BIFMA X 5.5-1998 Desk/Table Product Tests.

• Meets or exceeds UL 1286 and is designed in compliance with NFPA 70 National Electric Code

• Product shall be tested and compliant with UL 723 Test for Surface Burning Characteristics of Building

Materials using ASTM E 84 Standard Test Method

• Work surface edge profile, on edges designed to come into contact with users' wrists, comply with ISO 9241-5

(1998) Section 5.4.4, ANSI/HFES-100 (2008) section 8.3.1.4, BIFMA G1 (2002) Section 9, and CSA-Z412

(2000) section 7.5.12.

• Standard high-pressure laminates meet or exceed NEMA LD3-2005 High-Pressure Decorative Laminate standards.

• Product must meet ANSI/SOHO S6.50 Racking Resistance Test

• Product shall be tested to National Motor Freight standards to ensure packaging and shipment methods will prevent transit damage

• MDF shall comply with ANSI 208.1 and ASTM D 1037, and shall comply with ANSI 208.2

Environmental Features

• Paint is VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components

• Contains recycled content, and shall be recyclable at end of life

• Must have SCS IndoorAdvantage™ Gold Certification for indoor air quality.

• Must be level 1 certified to ANSI/BIFMA e3 Furniture Sustainability Standard

• Product shall be manufactured in a FSC Chain of Custody Certified plant to assure that wood is harvested from environmentally-managed forests

• Shipping packing materials shall be reusable and/or recyclable

• Miscellaneous

• Service parts must be available

• Locks shall be keyed alike within each office

• All necessary brackets and fasteners shall be provided for a stable and secure installation

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Painted surfaces have the following qualities: Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Finishes:

- Laminate: Wilsonart Laminate, Kensington Maple 10776-60

- Tackable Panel Upholstery: Graded in, TBD (3 grades above base grade)

- Tool Rail: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

DE01

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

13 9

Desk, Office, Sit-Stand

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 72" x 78" so that it may fit into the space and design of the area

• Desk layout shall be per attached supplementary drawings so that hand of desk and electrical stub-ups are in adequate locations; verify all dimensions in field prior to order, manufacture, and installation

• Desk shall be comprised of a system of coordinating parts and panels for a complete look

• Desk shall have provide power at worksurface height and shall provide cable management

• Power shall be provided to the desk at adjacent walls with standard outlets

• Service parts must be available

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Worksurfaces

• Overall Dimensions: Stationary worksurface: 30"d x 72"w x 29" h; Sit-stand table: 48"w x 24"d x 25.5"-49"h (+/-

3")

• Rectangular with square edges

• Space under the work surface shall be completely free of obstruction and support for the fixed height worksurface shall be accomplished with perimeter edges of the desk or storage units

• Sit-stand shall feature a powered base with simple, infinite up/down adjustability and programmable up/down control buttons with at least 3 pre-sets

• Sit-stand mechanism shall be controlled by central box to ensure synchronization

• Worksurface shall have antimicrobial features molded into the desk components using silver ion or similar technology

• Mobile B/B/F

• Overall Dimensions: 15"w x 18"d x 27"h (+/- 2") so that it may fit into the space and design of the area

• One larger "file" drawer, two smaller "box" drawers configuration

• Include Box drawer divider and pencil tray

• 3" diameter, large, front-locking, soft casters for hard floors

• Counterweight

• One lock shall lock all drawers, and shall be front-removable to simplify field changes

• All pulls shall comply with current ABA codes

• Drawers must feature heavy-duty steel drawer suspensions which allow drawers to open their full depth

Technical Specification and Code Requirements

• Table units meet or exceed ANSI/BIFMA X 5.5-1998 Desk/Table Product Tests.

• Meets or exceeds UL 1286 and is designed in compliance with NFPA 70 National Electric Code

• Product shall be tested and compliant with UL 723 Test for Surface Burning Characteristics of Building

Materials using ASTM E 84 Standard Test Method

• Work surface edge profile, on edges designed to come into contact with users' wrists, comply with ISO 9241-5

(1998) Section 5.4.4, ANSI/HFES-100 (2008) section 8.3.1.4, BIFMA G1 (2002) Section 9, and CSA-Z412

(2000) section 7.5.12.

• Standard high-pressure laminates meet or exceed NEMA LD3-2005 High-Pressure Decorative Laminate standards.

• Product must meet ANSI/SOHO S6.50 Racking Resistance Test

• Product shall be tested to National Motor Freight standards to ensure packaging and shipment methods will prevent transit damage

• MDF shall comply with ANSI 208.1 and ASTM D 1037, and shall comply with ANSI 208.2

Environmental Features

• Paint is VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components

• Contains recycled content, and shall be recyclable at end of life

• Must have SCS IndoorAdvantage™ Gold Certification or equal certification for indoor air quality.

• Must be level 1 certified to ANSI/BIFMA e3 Furniture Sustainability Standard

• Product shall be manufactured in a FSC Chain of Custody Certified plant to assure that wood is harvested from environmentally-managed forests

Kimball, Steelcase, Haworth, Herman

Miller

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

• Miscellaneous

• Service parts must be available

• Locks shall be keyed alike within each desk

• All necessary brackets and fasteners shall be provided for a stable and secure installation

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Painted surfaces have the following qualities: Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Manufacturer must offer a lifetime warranty that product is free from defects in materials and workmanship

(includes shipping, parts and labor for the repair or replacement of defective item.) Exceptions to this warranty may apply to certain components, as listed on manufacturer literature.

• Finishes:

- Laminate worksurface: Wilsonart Laminate, Kensington Maple 10776-60

- Metal/Trim: Champagne Metallic (Steelcase); or match

- Storage: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

DE02

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

14 2

Desk, Sit-stand 24x48

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 48"w x 24"d x 25.5"-49"h (+/- 3")

• Top available in different shapes and sizes; top shall be rectangle with square edge

• Powered base with simple, infinite up/down adjustability

• Programmable up/down control buttons with at least 3 pre-sets

• Worksurface shall have antimicrobial features molded into the desk components using silver ion or similar technology

• Integrated cable management

• Include Modesty Panel

• Shall provide leveling glides

• Greenguard Indoor Air Quality Certified

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a minimum 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Laminate: Wilsonart Laminate, Kensington Maple 10776-60

- Base: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

• All finishes must be selected and approved by the VA Interior Designer

Image is representational of general design intent.

DE03

Steelcase Ology, Kimball Priority, or

HAT Contract

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

15 3

Desk, Sit-stand 24x66

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 66"w x 24"d x 25.5"-49"h (+/- 3")

• Top available in different shapes and sizes; top shall be rectangle with square edge

• Powered base with simple, infinite up/down adjustability

• Programmable up/down control buttons with at least 3 pre-sets

• Worksurface shall have antimicrobial features molded into the desk components using silver ion or similar technology

• Integrated cable management

• Include Modesty Panel

• Shall provide leveling glides

• Greenguard Indoor Air Quality Certified

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a minimum 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Laminate: Wilsonart Laminate, Kensington Maple 10776-60

- Base: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

• All finishes must be selected and approved by the VA Interior Designer

Image is representational of general design intent.

DE04

Steelcase Ology, Kimball Priority, or

HAT Contract

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

16 4

Desk, Sit-stand 30x66

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 66"w x 30"d x 25.5"-49"h (+/- 3")

• Top available in different shapes and sizes; top shall be rectangle with square edge

• Powered base with simple, infinite up/down adjustability

• Programmable up/down control buttons with at least 3 pre-sets

• Worksurface shall have antimicrobial features molded into the desk components using silver ion or similar technology

• Integrated cable management

• Include Modesty Panel

• Shall provide leveling glides

• Greenguard Indoor Air Quality Certified

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a minimum 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Laminate: Wilsonart Laminate, Kensington Maple 10776-60

- Base: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

• All finishes must be selected and approved by the VA Interior Designer

Image is representational of general design intent.

DE05

Steelcase Ology, Kimball Priority, or

HAT Contract

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

17 16

Lamp, Desk

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 15"-19"w x 7.5"d x 13"-17"h (+/-1")

• Color Temperature: 3500K

• Lumens: 350

• CRI: 83

• "Touch & Hold" Built-in Dimmer with 3 brightness settings

• UL Listed

• Lamp Life: 50,000 hours

• 8 hr. shut-off feature

• 180-degree rotation at light source & lamp arm

• 360-degree rotation on base

• Cord Length: 12 feet

• Telescoping arm and head

• Integrated occupancy sensor

• Light turns off after 15 minutes of detecting no motion

• USB charging port

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Metal: Silver tone

• Style and finishes shall match Nursing Station and Office Furniture

• All finishes must be selected and approved by the VA Interior Designer

Image is representational of general design intent.

LA01

SystemsLight: ESI

Ergonomic

Solutions, Lustre, Lustre-SLV

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

18 43

Lounge, Chair

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 35"w x 35.25"d x 29"h; (+/- 3") 19"h, 18.75"d seat (+/-1")

• Fully Upholstered

• Crumb clean-out

• Upholstered arms with solid surface arm caps

• Tethered cushions

• Contrasting fabric on seat and back cushion, upholstered outer arms

• Non-skid, adjustable glides

• Power/USB Grommet in Arm (Location TBD)

• Greenguard Indoor Air Quality Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• All fabrics shall be bleach cleanable with a 10:1 water to bleach solution

• Manufacturer must offer a minimum 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Arm Caps: Corian, Savannah

- Legs: Square Silvertone metallic

- Back and Seat Upholstery: Graded in, TBD (3 grades above base grade for a coated fabric)

- Arm, Base, and Back Upholstery: Graded in, TBD (3 grades above base grade for a coated fabric)

• Style and finishes shall match Lobby Furniture

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

LO01

19 6

Lounge, Loveseat

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 51"w x 35.25"d x 29"h; (+/- 3") 19"h, 18.75"d seat (+/-1") so that it may fit into the space and design of the area

• Fully Upholstered

• Crumb clean-out

• Upholstered arms with solid surface arm caps

• Tethered cushions

• Contrasting fabric on seat and back cushion, upholstered outer arms

• Non-skid, adjustable glides

• Power/USB Grommet in Arm (Location TBD)

• Greenguard Indoor Air Quality Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• All fabrics shall be bleach cleanable with a 10:1 water to bleach solution

• Manufacturer must offer a minimum 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Arm Caps: Corian, Savannah

- Legs: Square Silvertone metallic

- Back and Seat Upholstery: Graded in, three (3) grades above base grade for a coated fabric

- Arm, Base, and Back Upholstery: Graded in, three (3) grades above base grade for a coated fabric

• Style and finishes shall match Lobby Furniture

Carolina Y60.G2, Kimball Villa Health, or Nemschoff Riva

OR EQUAL

Carolina Y60.G2, Kimball Villa Health, or Nemschoff Riva

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

Image is representational of general design intent.

LO02

20 7

Lounge, Table, Coffee

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 30"dia x 14.75"h (+/- 3"); 34 lbs so that it may fit into the space and design of the area

• Round, drum style table with square metal legs and 1/2" thick solid surface top

• Soft radius vertical edge on table top

• Durable High Pressure Laminate drum

• Shall provide non-marring leveling glides

• SCS Indoor Advantage and BIFMA Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a lifetime warranty that product is free from defects in materials and workmanship

(includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Solid Surface Top: Corian Clam Shell or approved equivalent (Savannah)

- Base: Clear Maple HPL (Hardrock)

- Legs: Square Silvertone metallic

• Style and finishes shall match with other Lobby Furniture

Image is representational of general design intent.

LO03

21 11

Lounge, Table, End

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 24"w x 24"d x 14.75"h (+/- 3"); 34 lbs so that it may fit into the space and design of the area

• Square, block style table with square metal legs and 1/2" thick solid surface top

• Soft radius vertical edge on table top

• Durable High Pressure Laminate block

• Shall provide non-marring leveling glides

• SCS Indoor Advantage and BIFMA Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable

- Solid Surface Top: Corian Clam Shell or approved equivalent (Savannah)

- Base: Clear Maple (Hardrock)

- Legs: Square Silvertone metallic

• Style and finishes shall match with other Lobby Furniture

Image is representational of general design intent.

LO04

Krug Zola

Freestanding Table, Round

OR EQUAL

Krug Zola

Freestanding Table, Round

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

22 11

Markerboard 3'x4'

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 48” width, 36" height and 0.75" depth (+/- 0.25") so that it may fit into the space and design of the area

• Frame Finish: Natural Anodized Aluminum

• Includes at minimum a 12" Aluminum pen rail, 4 dry erase markers and eraser

• White porcelain enamel writing surface fused to steel

• Accepts magnetic accessories

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

Image is representational of general design intent.

MB01

23 2

Markerboard 4'x5'

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 60” width, 48" height and 0.75" depth (+/- 0.25") so that it may fit into the space and design of the area

• Frame Finish: Natural Anodized Aluminum

• Includes at minimum a 24" Aluminum pen rail, 4 dry erase markers and eraser

• White porcelain enamel writing surface fused to steel

• Accepts magnetic accessories

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

Image is representational of general design intent.

MB02

Peter Pepper

Products, Tactics

Plus

OR EQUAL

Peter Pepper

Products, Tactics

Plus

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

24 26

Outdoor, Chair, Dining

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 24 3/4”w; 23 1/4"d; 32" h (+/- 1.5")

• Rated up to 250 lbs load, minimum

• Frame: Metal mesh seat welded to a tubular steel frame

• Outdoor grade powder coat paint

• Chair Stacks 8 high

• Optional outdoor cushion available (but not included)

• Shall provide nylon leveling glides

• Shall contain recycled content and be recyclable at end of life

• SCS Indoor Advantage and BIFMA Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Manufacturer must offer a lifetime warranty that product is free from defects in materials and workmanship

(includes shipping, parts and labor for the repair or replacement of defective item.)

• Finishes:

- Powdercoat Paint: Antique Iron

• Style and finishes shall match with other Outdoor Furniture

• All selected finishes must be approved by VA Interior Designer

Image is representational of general design intent.

OT01

25 3

Outdoor, Table, Dining 32x32

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 31 1/2”w; 31 1/2"d; 29 1/2" h (+/- 1.5") so that it may fit into the space and design of the area

• Table top and base are sheet metal with tubular steel mountings

• Outdoor grade powder coat paint

• Shall provide nylon leveling glides

• Shall contain recycled content and be recyclable at end of life

• SCS Indoor Advantage and BIFMA Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable

- Powdercoat Paint: Antique Iron

• Style and finishes shall match with other Outdoor Furniture

Image is representational of general design intent.

OT02

Coalesse, EMU

Round Seating

OR EQUAL

Coalesse, EMU

Round Tables

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

26 5

Outdoor, Table, Dining 47x31

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 47 1/2”w; 31 1/2"d; 29 1/2" h (+/- 1.5") so that it may fit into the space and design of the area

• Table top and base are sheet metal with tubular steel mountings

• Outdoor grade powder coat paint

• Shall provide nylon leveling glides

• Shall contain recycled content and be recyclable at end of life

• SCS Indoor Advantage and BIFMA Certified

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Powdercoat Paint: Antique Iron

• Style and finishes shall match with other Outdoor Furniture

Image is representational of general design intent.

OT03

27 22

Storage, Bookcase 2H

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 15” depth; 36” width; and 28" height (+/- 1.5") with integral 1.5" high integral base so that it may fit into the space and design of the area

• Configuration shall include 1 adjustable shelf; adjust in 3/4" vertical increments with a reversible bracket

• Straight Front

• Leveling glides on each corner shall have 3/4” range

• Back must be finished to allow file to be used in the open plan

• Ganging and tethering hardware must be offered to ensure alignment with adjacent cabinets and add stability;

shall be tethered to adjacent wall for seismic stability

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Service parts must be available

• Powdercoated Metal Finish

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Must meet or exceed all ANSI/BIFMA X5.9-2004 Storage Unit Tests

• Has documented proof that packaged product underwent shipping vibration and shock testing to ensure product received at customer site is undamaged

• Finishes:

-Powder Coated Metal: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, desks, and office furniture

Image is representational of general design intent.

ST01

Steelcase Universal

OR EQUAL

Coalesse, EMU

Round Tables

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

28 2

Storage, Bookcase 5H

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 15” depth; 36” width; and 84" height (+/- 1.5") with integral 1.5" high integral base so that it may fit into the space and design of the area

• Configuration shall include 5 adjustable shelves; adjust in 3/4" vertical increments with a reversible bracket

• Straight Front

• Leveling glides on each corner shall have 3/4” range

• Back must be finished to allow file to be used in the open plan

• Ganging and tethering hardware must be offered to ensure alignment with adjacent cabinets and add stability;

shall be tethered to adjacent wall for seismic stability

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Service parts must be available

• Powdercoated Metal Finish

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Must meet or exceed all ANSI/BIFMA X5.9-2004 Storage Unit Tests

• Has documented proof that packaged product underwent shipping vibration and shock testing to ensure product received at customer site is undamaged

• Finishes:

-Powder Coated Metal: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, desks, and office furniture

Image is representational of general design intent.

ST02

Steelcase Universal

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

29 3

Storage, Combination Cabinet

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 24” depth; 36” width; and 66" height (+/- 1.5") with integral 3" high base so that it may fit into the space and design of the area

• Configuration shall include 3 lateral file drawers below a cabinet with one adjustable shelf

• Cabinet shall feature doors with european hinges

• Leveling glides on each corner shall have 3/4” range

• Back must be finished to allow file to be used in the open plan

• Ganging and tethering hardware must be offered to ensure alignment with adjacent cabinets and add stability

• One lock shall lock all drawers, a second lock shall lock cabinet doors, and both shall be keyed separately and be front-removable to simplify field changes.

• Lock mechanism shall engage both sides of case

• All pulls shall comply with current ABA codes

• Drawers must feature heavy-duty steel drawer suspensions which allow drawers to open their full depth

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Service parts must be available

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Must meet or exceed all ANSI/BIFMA X5.9-2004 Storage Unit Tests

• 36” wide lateral drawers shall be tested for 150 lbs for 75,000 cycles

• Has documented proof that packaged product underwent shipping vibration and shock testing to ensure product received at customer site is undamaged

• Finishes:

-Powder Coated Metal: Champagne Metallic (Steelcase); or match

• Style and finishes shall match workstations, other desks, and office furniture

Image is representational of general design intent.

ST03

Steelcase Universal

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

30 2

Storage, Conference Credenza

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 24” depth; 30” width; and 29" height, (+/- 2") so that it may fit into the space and design of the area

• Wood construction

• Finished back panel with wire access cut outs

• Locks: keyed random

• Square ribbed edge top

• Flush mount surface with softened wood edge

• One adjustable shelf behind each door

• High-pressure laminate finish; Edge band and bullnose edges must have finishes which compliment or match work surfaces

• Surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Finishes:

- Laminate chassis, back, and doors: Wilsonart Laminate, Kensington Maple

- Laminate Top: Wilsonart Laminate, Kensington Maple

- Pull: Brushed Stainless Arc

• Finishes shall coordinate and match directly with Conference Furniture

Image is representational of general design intent.

ST04

Kimball Priority, Steelcase Universal

Brand Name

Manufacturer and

Part Number

Global Industrial

Hardwood top with

Steel Trapezoid

Pedestals

OR EQUAL

31 3

Storage, Lateral, 3H

Salient Characteristics: To include minimum of the following specifications:

Dimensions and Features

• Overall Dimensions: 36"w x 24"d x 40"h (+/- 2") so that it may fit into the space and design of the area

• Configuration shall include 3 lateral file drawers

• Leveling glides on each corner shall have 3/4” range

• Back must be finished to allow file to be used in the open plan

• Ganging and tethering hardware must be offered to ensure alignment with adjacent cabinets and add stability

• One lock shall lock all drawers, keyed random and be front-removable to simplify field changes.

• Lock mechanism shall engage both sides of case

• All pulls shall comply with current ABA codes

• Drawers must feature heavy-duty steel drawer suspensions which allow drawers to open their full depth

• Factory applied finish - electrostatic, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

• Service parts must be available

• Work surfaces shall not be affected by ordinary household solvents, acids, alcohols, or salt solutions and is capable of being wiped clean with ordinary household cleaning solutions

• Must meet or exceed all ANSI/BIFMA X5.9-2004 Storage Unit Tests

• 36” wide lateral drawers shall be tested for 150 lbs for 75,000 cycles

• Has documented proof that packaged product underwent shipping vibration and shock testing to ensure product received at customer site is undamaged

• Finishes:

- Powder Coated Metal: Champagne Metallic (Steelcase); or match

- Pull: Brushed Stainless Arc

• Style and finishes shall match workstations, other desks, and office furniture

Image is representational of general design intent.

ST05

Steelcase Universal

Brand Name

Manufacturer…