36C24818Q9294-002.docx

Salient Characteristics

Salient Characteristics of Cubicle Curtains & Mesh

· Cubicle Curtain Material

· Manufacturer: Architex; RX6001; Color: Stem

· 72” wide; repeat: V-76”, H-28”

· Simply 66 Style with rustproof plastic snaps

· Not Railroaded

· Weight 1.000 lbs./Lin yd.

· Fiber content: 100% Trevira CS

· Cleaning: Wash up to 160 degrees, Fade Resistant

· Warranty: 10 years

· Passes NFPA 701; ASTME84 Standard; CAL Title 19

· Meets or exceeds all ACT performance standards

· Finished curtain width equal to track length from which curtain is hung plus 10 percent added fullness, but not less than 12 inches added fullness.

· Top Hem to be 1-1/2” wide, triple thickness and double locked stitched.

· Bottom Hem: to be 1-1/2” wide double thickness double lock stitched.

· Side Hem: to be ½” wide turned and single lock stitched.

· Vertical Seams: Not less than ½” wide, double turned and double stitched.

· Grommets: Two-piece, rolled-edge rustproof plastic snaps, spaced not more than 6 inches on center, machined to curtain top and sides.

Submittal Samples: 12 inches square swatch of Mesh with top and bottom banding and snaps

· Mesh

· Mesh color: White

· Mesh Width: 61” -112”

· Mesh Length: varies from 24-42” as per each line item

· Mesh Top: ½” grommet attached to top of curtain fabric, with ½” wide triple thick top seam. Mesh to have a 1-1/4” 100% flame resistant polyester tape double lock stitched into top and bottom hems for secure machining of grommets.

· Mesh: ½” hole flame resistant nylon mesh

· Mesh Grommets: Two-piece, rolled-edge rustproof plastic snaps, spaced not more than 6 inches on center, machined to mesh bottom.

If specifying paint finish, indicate paint system and color number.(i.e. Chroma, DC15 – Scout) Show locations of accessory panels on Drawings. Add all applicable materials used in the centerline glass frame that is NOT glass (i.e. 3form, wood veneer over substrate, upholstered panel over substrate, etc.).