3275VL14 TOD.pdf
PDF 301 KB Posted
- Attached to
- INSERT, WELDING Federal contract opportunity
- Solicitation number
- N4523A24Q4000
About this file
This document is a technical specification for welding inserts to be provided under a federal contract opportunity. It specifies MIL-I-23413C(SH) class 1 style A type 625 welding inserts in 1/8 inch size, with the maximum sulfur content restricted to 0.007 percent. The solicitation is identified as N4523A24Q4000 for welding insert products from the Department of the Navy Naval Supply Systems Command. A certificate of compliance and SDS are required to be provided by the contractor.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 3275VL04 TOD.pdf | ||
| 3275VL04 CDRL - A001 COC.pdf | ||
| N4523A24Q4000.pdf | ||
| 3275VL04 CDRL - A002 - SDS REPORT.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MIL-I-23413C(SH)
(a) Title, number, revision, and date of this specification:
Inserts, welding, filler metal, coiled and solid rings
MIL-I-23413C dated 04 AUG 1981 & interim change 6 dated 22 APR 2021
(b) Class, Style, Type, and Size (for all classes) (see 1.2, 3.2, 3.3, 3.4, and 3.6 and tables VIII, IX, and X):
Class: 1
Style: A
Type: 625
Size: 1/8 inch
(c) Shape, dimensions, and tolerances of cross sections of class 5 inserts (see 1.2.1, 3.6.1, and 3.6.1.1):
NA
(d) Whether bright annealing of group “C” and “E” inserts is required (see 3.1.2.2.2): Not Required
(e) Whether special bright hydrogen annealing of MIL-52i, MIL-62, MIL-82, MIL-82H and MIL-625 inserts is required
(see 3.1.2.2.2): Not Required
(f) Whether minimum carbon content for group “E” inserts is required (see table VI): Not Required
(g) Whether alloy identity testing of each cut length of wire in preformed inserts and each end of each spool or coil of insert wire after final marking is required (see 3.1.4.2): Not Required
(h) If style “A” coiled inserts are to be furnished in other than 50-feet lengths wound on a 12-inch rim (see 3.1.2.2.2): N/
A
(i) Templates must be furnished on all orders for style “B” of classes 1, 2, and 5 and style “C” of classes 1, 2, 4, and 5 (see 3.2.3, 3.2.4, 3.4.3, 3.5.3, 3.5.4)
(j) If class 3 solid insert rings are to be other than as specified on figure 2 (see 3.3.1): N/A
***CERTIFICATE OF COMPLIANCE REQUIRED***
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative
Contracting Officer (ACO).
JOB ORDER
36RNN87307
KEY OP
S02
KO ITEM
REV
IDN IDN REV
2305.3 Form Rev 10/2019
3275-VL14
** SDS REQUIRED** ** QTY: 1CL=50FT**
MIL-I-23413C (Cont’d)
(k) Pipe schedule number for class 3 and, if applicable, class 5, style “D (see tables IX and X): N/A
(l) Whether special ring sizes are required (see table IX): Not Required
(m) Shape, dimensions, and tolerances of cross section for class 5 (see 3.5.1 and 3.5.1.1): N/A
(n) Circumferential overlap of class 5, style “B” inserts of greater than 14 inches nominal diameter (see 3.5.3):
N/A
(o) I.D. and O.D. dimensions and tolerances for class 5, style “D” inserts (see 3.5.5): N/A
(p) Use of polystyrene (loose-fill) material (see 5.2): Not allowed
(q) Special coiling conditions for class 4, style “A”, if required: N/A
(r) If maximum sulfur content is restricted to 0.007 percent (see table VI): Is restricted
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative
Contracting Officer (ACO).
JOB ORDER
36RNN87307
KEY OP
S02
KO ITEM
REV
IDN IDN REV
2305.3 Form Rev 10/2019
3275-VL14
File details come from the government source that posted it. Updated .