3275VL04 TOD.pdf
PDF 275 KB Posted
- Attached to
- INSERT, WELDING Federal contract opportunity
- Solicitation number
- N4523A24Q4000
About this file
This document is a technical specification for welding inserts to be provided under a federal contract opportunity issued by the Naval Supply Systems Command. The specification covers Class 1 Style A Type 625 welding inserts in 1/8 inch size, made of alloy 625 material with a maximum sulfur content restricted to 0.007 percent. Fifty feet of inserts wound on a 12-inch rim and meeting all requirements of MIL-I-23413C specification are to be provided under Job Order 36NZG-87315 for Key OP S05 KO Item 130. No changes to the technical requirements are permitted without approval from the Administrative Contracting Officer.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N4523A24Q4000.pdf | ||
| 3275VL04 CDRL - A002 - SDS REPORT.pdf | ||
| 3275VL14 TOD.pdf | ||
| 3275VL04 CDRL - A001 COC.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MIL-I-23413C(SH)
(a) Title, number, revision, and date of this specification:
Inserts, welding, filler metal, coiled and solid rings
MIL-I-23413C dated 04 AUG 1981 & interim change 6 dated 22 APR 2021
(b) Class, Style, Type, and Size (for all classes) (see 1.2, 3.2, 3.3, 3.4, and 3.6 and tables VIII, IX, and X):
Class: 1
Style: A
Type: 625
Size: 1/8 inch
(c) Shape, dimensions, and tolerances of cross sections of class 5 inserts (see 1.2.1, 3.6.1, and 3.6.1.1):
NA
(d) Whether bright annealing of group “C” and “E” inserts is required (see 3.1.2.2.2): Not Required
(e) Whether special bright hydrogen annealing of MIL-52i, MIL-62, MIL-82, MIL-82H and MIL-625 inserts is required
(see 3.1.2.2.2): Not Required
(f) Whether minimum carbon content for group “E” inserts is required (see table VI): Not Required
(g) Whether alloy identity testing of each cut length of wire in preformed inserts and each end of each spool or coil of insert wire after final marking is required (see 3.1.4.2): Not Required
(h) If style “A” coiled inserts are to be furnished in other than 50-feet lengths wound on a 12-inch rim (see 3.1.2.2.2): N/
A
(i) Templates must be furnished on all orders for style “B” of classes 1, 2, and 5 and style “C” of classes 1, 2, 4, and 5 (see 3.2.3, 3.2.4, 3.4.3, 3.5.3, 3.5.4)
(j) If class 3 solid insert rings are to be other than as specified on figure 2 (see 3.3.1): N/A
***CERTIFICATE OF COMPLIANCE REQUIRED***
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative
Contracting Officer (ACO).
JOB ORDER
36NZG-87315
KEY OP
S05
KO ITEM
REV
IDN IDN REV
2305.3 Form Rev 10/2019
3275-VL04
** SDS REQUIRED** **QTY= 1CL=50FT**
MIL-I-23413C (Cont’d)
(k) Pipe schedule number for class 3 and, if applicable, class 5, style “D (see tables IX and X): N/A
(l) Whether special ring sizes are required (see table IX): Not Required
(m) Shape, dimensions, and tolerances of cross section for class 5 (see 3.5.1 and 3.5.1.1): N/A
(n) Circumferential overlap of class 5, style “B” inserts of greater than 14 inches nominal diameter (see 3.5.3):
N/A
(o) I.D. and O.D. dimensions and tolerances for class 5, style “D” inserts (see 3.5.5): N/A
(p) Use of polystyrene (loose-fill) material (see 5.2): Not allowed
(q) Special coiling conditions for class 4, style “A”, if required: N/A
(r) If maximum sulfur content is restricted to 0.007 percent (see table VI): Is restricted
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative
Contracting Officer (ACO).
JOB ORDER
36NZG-87315
KEY OP
S05
KO ITEM
REV
IDN IDN REV
2305.3 Form Rev 10/2019
3275-VL04
File details come from the government source that posted it. Updated .