246-2016-Q-0038 _Hominy_WLX.pdf

246-2016-Q-0038

PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF. RATING

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5A. ISSUED BY 6. DELIVER BY (Date)

5B. FOR INFORMATION CALL: (No collect calls) 7. DELIVERY

NAME TELEPHONE NUMBER FOB DESTINATION (See Schedule)

OTHER

AREA CODE NUMBER 9. DESTINATION

a. NAME OF CONSIGNEE

8. TO:

a. NAME b. COMPANY b. STREET ADDRESS

c. STREET ADDRESS c. CITY

d. CITY e. STATE f. ZIP CODE d. STATE e. ZIP CODE

10. PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE ON

OR BEFORE CLOSE OF BUSINESS (Date)

This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

(a) (b) (c) (d) (e) (f)

a. 10 CALENDAR DAYS % b. 20 CALENDAR DAYS % c. 30 CALENDAR DAYS % d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO SIGN QUOTATION 15. DATE OF QUOTATION

a. NAME OF QUOTER

b. STREET ADDRESS 16. SIGNER

a. Name (Type or print) b. TELEPHONE

c. COUNTY AREA CODE

d. CITY e. STATE f. ZIP CODE c. TITLE (Type or print) NUMBER

IMPORTANT:

11. SCHEDULE (Include applicable Federal, State and local taxes)

12. DISCOUNT FOR PROMPT PAYMENT

(THIS IS NOT AN ORDER)

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

Previous edition not usable Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

REQUEST FOR QUOTATIONS

1 106

X

07/20/2016 IHS1296059

Oklahoma City Area Indian Health Service 701 Market Drive Oklahoma City, OK 73114

90 Days after Award

Shaun McGinnis Fax (405) 951-3932 shaun.mcginnis@ihs.gov 405 951-3929

(To Prospective Offerors)

Pawnee OEH&E

County Road 5244

Hominy, OK

OK 74035

COB August 19th 2016

Contractor shall provide a waterline extension in Hominy, Oklahoma in accordance with the attached SOW and Technical Specifications.

Additional Provisions and Conditions;

(9 pages; 3-11, are attached hereto).

Scope of Work;

(1 Page; 12).

General Wage Decision OK160030 07/01/2016;

is hereby incorporated. (5 Pages; 13-17).

Attachment #1 – Technical Specifications;

(89 Pages; 18-106).

FAR Clauses 52.213-4, Terms and Conditions – Simplified Acquisitions, are incorporated herein.

FAR Clause, 52.204-7, System for Award Management, does apply.

A Site Visit is scheduled for:

Date: Tuesday, 2 August 2016 Time: 10:30am - 12:00pm Location: Meet at Hominy Cemetery on Russell Rd in Hominy, OK 74035.

See Bid Sheet on Page #2

X

Item Description Qty Unit Unit Cost Total Cost

Mobilization/Demobilization 1 LS

4" PVC SDR 21 water main; including tracer wire, appurtenances, and connection 3300 LF

3 4" Gate Valve with concrete pad 4 Each

1" PEX water service line; including tracer wire and appurtenances 1200 LF

5 Watermeter with Box 4 EA.

6 Tapping Saddles 4 EA.

7 Air relief valves 3 Each

8 2" HDPE Sleeve for 1" WSL under roadway 60 LF

9 Boring under Roadway For 2" HDPE Sleeve 2 EA

10 2" Flush hydrants 1 Each

Rock Excavation in trenchs 12,000 psi rock 20 inches thick with imported bedding 1500 LF

Imported sand bank run material, placement and compaction 200 LCY

Total

Bid Sheet

ADDITIONAL PROVISIONS/TERMS AND CONDITIONS

A.1 NOTICE LISTING CLAUSES INCORPORATED BY REFERENCE

The following clauses are hereby incorporated by reference (by Citation Number, Title, and Date) in accordance with the clause at FAR "52.252-2 CLAUSES INCORPORATED BY REFERENCE" contained in this document. FAR 52.252-2 contains the internet address for electronic access to the full text of a clause.

NUMBER TITLE DATE

FEDERAL ACQUISITION REGULATION (48 CFR Chapter 1)

52.222-5 CONSTRUCTION WAGE RATE REQUIREMENTS MAY 2014

--SECONDARY SITE OF THE

WORK

52.222-6 CONSTRUCTION WAGE RATE REQUIREMENTS MAY 2014

52.222-7 WITHHOLDING OF FUNDS MAY 2014

52.222-8 PAYROLLS AND BASIC RECORDS MAY 2014

52.222-9 APPRENTICES AND TRAINEES JUL 2005

52.222-10 COMPLIANCE WITH COPELAND ACT FEB 1988

REQUIREMENTS

52.222-11 SUBCONTRACTS (LABOR STANDARDS) MAY 2014

52.222-12 CONTRACT TERMINATION - DEBARMENT MAY 2014

52.222-13 COMPLIANCE WITH WAGE RATE REQUIREMENTS MAY 2014

AND RELATED REGULATIONS

52.222-14 DISPUTES CONCERNING LABOR STANDARDS FEB 1988

52.222-15 CERTIFICATION OF ELIGIBILITY MAY 2014

52.222-27 AFFIRMATIVE ACTION COMPLIANCE APR 2015

REQUIREMENTS FOR CONSTRUCTION

52.222-42 STATEMENT OF EQUIVALENT RATES FOR MAY 2014

FEDERAL HIRES

52.222-50 COMBATING TRAFFICKING IN PERSONS MAR 2015

52.225-2 BUY AMERICAN ACT CERTIFICATE MAY 2014

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN JUN 2008

PURCHASES

52.228-1 BID GUARANTEE SEPT 1996

52.228-5 INSURANCE-WORK ON A GOVERNMENT JAN 1997

INSTALLATION

52.228-15 PERFORMANCE & PAYMENT BONDS- OCT 2010

CONSTRUCTION

52.232-27 PROMPT PAYMENT FOR CONSTRUCTION MAY 2014

CONTRACTS

52.233-4 APPLICABLE LAW FOR BREACH OF OCT 2004

CONTRACT CLAIM

52.236-5 MATERIAL AND WORKMANSHIP APR 1984

52.236-7 PERMITS AND RESPONSIBILITIES NOV 1991

52.236-8 OTHER CONTRACTS APR 1984

52.236-9 PROTECTION OF EXISTING VEGETATION, APR 1984

STRUCTURES, EQUIPMENT, UTILITIES, AND

IMPROVEMENTS

52.236-10 OPERATIONS AND STORAGE AREAS APR 1984

52.236-11 USE AND POSSESSION PRIOR TO COMPLETION APR 1984

52.236-26 PRECONSTRUCTION CONFERENCE FEB 1995

52.237-1 SITE VISIT APR 1984

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, APR 1984

EQUIPMENT, AND VEGETATION

52.242-14 SUSPENSION OF WORK APR 1984

52.242-17 GOVERNMENT DELAY OF WORK APR 1984

52.243-1 CHANGES--FIXED-PRICE AUG 1987

52.246-12 INSPECTION OF CONSTRUCTION AUG 1996

52.246-21 WARRANTY OF CONSTRUCTION MAR 1994

352.270-2 INDIAN PREFERENCE APR 1984

A.2 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (APR 2016)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 237110.

(2) The small business size standard is $36.5M

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

[_] (i) Paragraph (d) applies.

[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(iv) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(v) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations—Representation.

(vi) 52.209-5; Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(vii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any

Federal Law. This provision applies to all solicitations.

(viii) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(ix) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(x) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xi) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvi) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xvii) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xviii) 52.225-4, Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.)

This provision applies to solicitations containing the clause at 52.225- 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $77,533, the provision with its Alternate II applies.

(D) If the acquisition value is $79,507 or more but is less than $100,000, the provision with its Alternate III applies.

(xix) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xx) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxi) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to

Iran—Representation and Certification. This provision applies to all solicitations.

(xxii) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

___ (i) 52.204-17, Ownership or Control of Offeror.

___ (ii) 52.204-20, Predecessor of Offeror.

___ (iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

___ (iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

___ (v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-

-Certification.

___ (vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA-Designated

Products (Alternate I only).

___ (vii) 52.227-6, Royalty Information.

___ (A) Basic.

___ (B) Alternate I.

___ (viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.acquisition.gov . After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of Provision)

A.3. 52.213-4 Terms and Conditions, Simplified Acquisitions (Other Than Commercial Items) (Jun 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

(ii) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(iii) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

(iv) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(v) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(vi) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. L. 108-77, 108-78 (19 U.S.C. 3805 note)).

(2) Listed below are additional clauses that apply:

(i) 52.232-1, Payments (Apr 1984).

(ii) 52.232-8, Discounts for Prompt Payment (Feb 2002).

(iii) 52.232-11, Extras (Apr 1984).

(iv) 52.232-25, Prompt Payment (Jul 2013).

(v) 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013).

(vi) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)

(vii) 52.233-1, Disputes (May 2014).

(viii) 52.244-6, Subcontracts for Commercial Items (Jun 2016).

(ix) 52.253-1, Computer Generated Forms (Jan 1991).

(b) The Contractor shall comply with the following FAR clauses, incorporated by reference, unless the circumstances do not apply:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note) (Applies to contracts valued at $30,000 or more).

(ii) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O.

13126). (Applies to contracts for supplies exceeding the micro-purchase threshold).

(iii) 52.222-20, Contracts for Materials, Supplies, Articles, and Equipment Exceeding $15,000 (May 2014) (41 U.S.C. chapter 65) (Applies to supply contracts over $15,000 in the United States, Puerto Rico, or the U.S. Virgin Islands).

(iv) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).

(v) 52.222-36, Equal Employment for Workers with Disabilities (Jul 2014) (29 U.S.C. 793) (Applies to contracts over $15,000, unless the work is to be performed outside the United States by employees recruited outside the United States.) (For purposes of this clause, “United States” includes the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island.)

(vi) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).

(vii) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67) (Applies to service contracts over $2,500 that are subject to the Service Contract Labor Standards statute and will be performed in the United States, District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, or the outer Continental Shelf.)

(viii)(A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627) (Applies to all solicitations and contracts).

(B) Alternate I (Mar 2015) (Applies if the Contracting Officer has filled in the following information with regard to applicable directives or notices: Document title(s), source for obtaining document(s), and contract performance location outside the United States to which the document applies).

(ix) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (Applies when 52.222-6 or 52.222-41 are in the contract and performance in whole or in part is in the United States (the 50 States and the District of Columbia)).

(x) 52.223-5, Pollution Prevention and Right-to-Know Information (May 2011) (E.O. 13423) (Applies to services performed on Federal facilities).

(xi) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693) (Applies to contracts for products as prescribed at FAR 23.804(a)).

(xii) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693) (Applies to maintenance, service, repair, or disposal of refrigeration equipment and air conditioners).

(xiii) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b) (Unless exempt pursuant to 23.204, applies to contracts when energy-consuming products listed in the ENERGY STAR® Program or Federal Energy Management Program (FEMP) will be—

(A) Delivered;

(B) Acquired by the Contractor for use in performing services at a Federally-controlled facility;

(C) Furnished by the Contractor for use by the Government; or

(D) Specified in the design of a building or work, or incorporated during its construction, renovation, or maintenance).

(xiv) 52.223-20, Aerosols (Jun 2016) (E.O. 13693) (Applies to contracts for products that may contain high global warming potential hydrofluorocarbons as a propellant or as a solvent; or contracts for maintenance or repair of electronic or mechanical devices).

(xv) 52.223-21, Foams (Jun 2016) (E.O. 13693) (Applies to contracts for products that may contain high global warming potential hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons as a foam blowing agent; or contracts for construction of buildings or facilities).

(xvi) 52.225-1, Buy American —Supplies (May 2014) (41 U.S.C. chapter 83) (Applies to contracts for supplies, and to contracts for services involving the furnishing of supplies, for use in the United States or its outlying areas, if the value of the supply contract or supply portion of a service contract exceeds the micro-purchase threshold and the acquisition--

(A) Is set aside for small business concerns; or

(B) Cannot be set aside for small business concerns (see 19.502-2), and does not exceed $25,000).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792) (Applies to contracts greater than $25,000 that provide for the provision, the service, or the sale of food in the United States).

(xviii) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (Applies when the payment will be made by electronic funds transfer (EFT) and the payment office uses the System for Award Management (SAM) database as its source of EFT information.)

(xix) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013) (Applies when the payment will be made by EFT and the payment office does not use the SAM database as its source of EFT information.)

(xx) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. App.1241) (Applies to supplies transported by ocean vessels (except for the types of subcontracts listed at 47.504(d).)

(2) Listed below are additional clauses that may apply:

(i) 52.204-21, Basic Safeguarding of Covered Contractor Information Systems (Jun 2016) (Applies to contracts when the contractor of a subcontractor at any tier may have Federal contract information residing in or transiting through its information system.)

(ii) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (Applies to contracts over $35,000).

(iii) 52.211-17, Delivery of Excess Quantities (Sep 1989) (Applies to fixed-price supplies).

(iv) 52.247-29, F.o.b. Origin (Feb 2006) (Applies to supplies if delivery is f.o.b. origin).

(v) 52.247-34, F.o.b. Destination (Nov 1991) (Applies to supplies if delivery is f.o.b.

destination).

(c) FAR 52.252-2, Clauses Incorporated by Reference (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm

(d) Inspection/Acceptance. The Contractor shall tender for acceptance only those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. The Government must exercise its postacceptance rights --

(1) Within a reasonable period of time after the defect was discovered or should have been discovered;

and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(e) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence, such as acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(f) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall http://farsite.hill.af.mil/vffara.htm immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges that the Contractor can demonstrate to the satisfaction of the Government, using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred that reasonably could have been avoided.

(g) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance.

In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(h) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

End of Clause

A.4 52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions affecting the work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) A site visit is scheduled for 2 August 2016 at 10:30am and will be the only site visit. Interested parties will meet at the Hominy Cemetery on Russell Rd in Hominy, OK 74035. Please coordinate with the point of contact below. Vendors are encouraged and may be arranged during normal duty hours by contacting:

Shaun McGinnis Shaun.mcginnis@ihs.gov

Telephone: (405) 951-3929

PROJECT: Waterline Extension to serve Dailey, White, Hensley, and Lohah.

PROJECT NO.: OK 12-S81

PREPARED BY: Patrick Fox, E.I.T.

SCOPE OF WORK:

Location

Project is located within the City of Hominy in Osage County, Oklahoma. The waterline will be located west of the intersection of Stallard Road and Highway 99. The specific location can be found in the attached plans.

Furnish and Install

- Project will consist of 3,300 feet of 4” SDR 21 PVC waterline. The line will be connected to existing water system and include a 4-inch gate valve at the connection.

- Three 4.5 inch hydrants will be placed along the line according to the plans with a bury depth of 4 feet. A 4-inch gate valve will precede each hydrant. The hydrants will be purchased by the City of Hominy.

- Three air relief valves will be placed on the line at locations specified in the plans.

- 1200 feet of 1” PEX water service line will be connected to the 4” PVC line and ran to serve 4 homes. Each service line will include a water meter and box, pressure reducing valve, and connection to the home. The City of Hominy will provide the 3/4" meters.

- Two of the service lines will each require approximately 30 feet of boring, 60 feet in total, under Stallard Road for a 2” HDPE sleeve.

- All work performed will meet the requirements of the attached technical specifications.

General Decision Number: OK160030 07/01/2016 OK30

Superseded General Decision Number: OK20150030

State: Oklahoma

Construction Type: Heavy

Counties: Creek, Okmulgee, Osage, Pawnee, Rogers and Wagoner Counties in Oklahoma.

HEAVY CONSTRUCTION PROJECTS (including sewer/water line construction; heavy construction projects on treatment plants and industrial sites) (excludes heavy dredging and water well drilling)

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis-Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/08/2016 1 07/01/2016

ELEC1002-005 06/28/2015

Rates Fringes

ELECTRICIAN......................$ 33.89 29%+5.00

* ENGI0627-014 06/01/2016

Rates Fringes

POWER EQUIPMENT OPERATOR:

Group 1.....................$ 28.05 12.58 Group 2.....................$ 26.35 12.58 Group 3.....................$ 25.80 12.58 Group 4.....................$ 25.05 12.58 Group 6.....................$ 24.10 12.58 Group10.....................$ 21.10 12.58

POWER EQUIPMENT OPERATOR

GROUP 1: All Crane Type Equipment 200 ton and larger and including 400 ton capacity cranes. All Tower Cranes.

GROUP 2: All Crane Type Equipment 100 ton capacity and larger cranes, and less than 200 ton capacity.

7/15/2016http://www.wdol.gov/wdol/scafiles/davisbacon/OK30.dvb?v=1

GROUP 3: All Crane Type Equipment 50 ton capacity and larger cranes, and less than 100 ton capacity. Crane Equipment (as rated by mfg.) 3 cu. yd. and over Guy derrick Whirley Power Driven Hole Digger (with 30' and longer mast).

GROUP 4: CRANES with Boom Incl. Jib less than 100 ft and less than 3 cu. Yd.; Overhead Monorail Crane

GROUP 6: ROLLER (ASPHALT AND DIRT)

GROUP 10:OILER

IRON0584-019 06/01/2015

Rates Fringes

IRONWORKER (Structural, Reinforcing, and Ornamental).....$ 24.00 13.53

SUOK2012-008 05/18/2012

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 14.00 3.95

FORM WORKER......................$ 11.77 0.00

LABORER: Common or General......$ 11.78 2.76

LABORER: Pipelayer..............$ 12.94 2.42

OPERATOR: Backhoe/Excavator.....$ 16.62 3.10

OPERATOR: Bulldozer.............$ 17.98 1.75

OPERATOR: Drill.................$ 17.15 0.78

OPERATOR: Grader/Blade..........$ 17.76 3.87

OPERATOR: Loader (Front End)....$ 14.01 0.00

OPERATOR: Mechanic..............$ 19.61 9.39

OPERATOR: Scraper...............$ 16.00 1.55

OPERATOR: Trackhoe..............$ 18.54 2.78

TRUCK DRIVER: Dump Truck........$ 14.64 1.71

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

Ok 12-S81 Hominy Waterline Extension October 27, 2015 Osage County, OK

Author: Patrick Fox, E.I.T. TABLE OF CONTENTS File: Hominy WLX Page 3 of 89

SECTION 00 01 10.0000

TABLE OF CONTENTS

SECTION NUMBER - TITLE

Section 00 01 00.0000 - Project Title Page

Section 00 01 07.0000 - Seal Page

Section 00 01 10.0000 - Table of Contents

Section 00 01 15.0000 - List of Drawing Sheets

Section 01 11 00.0000 – Summary of Work

Section 01 22 00.0000 – Unit Prices

Section 01 33 00.0000 – Submittal Procedures

Section 01 42 19.0000 - Reference Standards

Section 01 43 00.0000 – Quality Assurance

Section 01 77 00.0000 – Closeout Procedures

Section 01 78 00.0000 – Closeout Submittals

Section 03 30 53.0000 – Miscellaneous Cast-In- Place Concrete

Section 31 22 13.0000 – Rough Grading

Section 31 22 16.0000 – Fine Grading

Section 31 23 16.1300 – Trenching

Section 31 23 16.2600 – Rock Removal

Section 31 23 23.1300 – Backfill

Section 31 23 23.2300 – Compaction

Section 32 92 00.0000 – Turf and Grasses

Section 33 05 23.2201 – Utility Horizontal Directional Drilling PE Pipe

Section 33 11 13.0001 – Public Water Distribution Piping Disinfection

Section 33 11 13.2500 – Cross-Linked Polyethylene Water Service Lines

Section 33 11 13.2510 – Public Water Distribution Piping Polyvinyl Chloride Pipe

Section 33 11 13.2541 – Public Water Utility Fittings Polyvinyl Chloride Pipe

Section 33 12 16.1038 – Public Water Utility Distribution Gate Valves

Section 33 12 19.1000 – Public Water Utility Distribution Flush Hydrants

Author: Patrick Fox, E.I.T. LIST OF DRAWING SHEETS File: Hominy WLX Page 4 of 89

SECTION 00 01 15.0000

LIST OF DRAWING SHEETS

SHEET NUMBER TITLE

Cover Sheet and Location Map

Notes and Legend

3 Site Plan

4 Plan & Profile

Plan & Profile

Plan & Profile

Details

8 Details

Author: Patrick Fox, E.I.T. SUMMARY OF WORK File: Hominy WLX Page 5 of 89

SECTION 01 11 00.0000

SUMMARY OF WORK

PART 1 GENERAL

1.01 SUMMARY

A. Provide the following to complete the work in these Specifications and Contract Drawings:

1. Tools.

2. Equipment.

3. Materials.

4. Labor.

5. Supplies.

6. Manufactured articles.

7. All transportation to complete the work.

8. Temporary facilities.

B. Incidentals Items: Furnish all work, materials, and services not expressly provided by others or not expressly called for in the contract, but which are necessary for the completion of the work.

1.02 SITE LOCATION

A. Location:

1. White, Lohah, Hensley, and Dailey homes; W CR 5244, Osage County, Oklahoma

1.03 SUMMARY OF WORK TO BE DONE BY CONTRACTOR

A. Install approximately 3273 feet of 4-inch SDR 21 PVC water line, 1170 feet of 1-inch pex pipe, and appurtenances to serve the four homes.

B. Rural Water District: Hominy PWA

1.04 TRIBAL REGULATIONS

A. Comply with Tribal regulations related to the completion of the work including:

1. Acquisition of necessary permits.

2. Payment of Tribal TERO taxes (if required).

1.05 ADDITIONAL INFORMATION

Author: Patrick Fox, E.I.T. SUMMARY OF WORK File: Hominy WLX Page 6 of 89

A. For technical questions contact:

Judy Perkins Oklahoma City Area Indian Health Service 701 Market Drive Oklahoma City, OK 73114 405-951-6023 Email: judy.perkins@ihs.gov

PART 2 PRODUCTS (Not Used)

PART 3 EXECUTION (Not Used)

END OF SECTION

Author: Patrick Fox, E.I.T. UNIT PRICES File: Hominy WLX Page 7 of 89

SECTION 01 22 00.0000

UNIT PRICES

A. Work covered by this section includes:

1. Method of measurement.

2. Basis of payment.

1.02 PAYMENT

A. Payment is for completed and accepted work, including incidentals, performed in strict accordance with the drawings and specifications.

B. Unless otherwise noted, mobilization and demobilization of equipment are included in the bid price of each item.

C. Payment includes:

1. Mobilization and demobilization of equipment and materials.

2. Labor.

3. Materials.

4. Equipment.

5. Tools.

6. Testing equipment.

7. General requirements in Division 01.

a. Submittals.

b. Record drawings.

c. Temporary facilities and controls.

d. Operation and maintenance manuals.

D. See individual sections for payment details.

PART 2 PRODUCTS (not used).

PART 3 EXECUTION (not used).

Author: Patrick Fox, E.I.T. UNIT PRICES File: Hominy WLX Page 8 of 89

Author: Patrick Fox, E.I.T. SUBMITTAL PROCEDURES File: Hominy WLX Page 9 of 89

SECTION 01 33 00.0000

SUBMITTAL PROCEDURES

A. Section includes submittal procedures.

B. Related Requirements:

1. Section 01 78 00.0000 – Closeout Submittals.

PART 2 PRODUCTS (Not Used).

PART 3 EXECUTION

3.01 SUBMITTAL PROCEDURES

A. The required submittals are listed in PART 2 PRODUCTS of each section.

B. Provide one copy of each submittal to the Project Officer.

1. Copies may be any one of the following:

a. Emailed:

1) Downloads from the manufacturer’s web site (preferred).

2) Scanned from hard copies (300 dpi black and white minimum).

b. Mailed:

1) Patrick Fox E.I.T., Pawnee OEH&E, 1201 Heritage Circle, Pawnee, OK 74058

C. Identify each cut sheet or shop drawing with the following information:

1. Contract or Purchase Order number.

2. Supplier.

3. Specification Section number.

D. Submit the following information (if applicable):

1. Manufacturer’s cut sheets: Show compliance with references (e.g. applicable ASTM, AWWA standards).

2. Laboratory results.

Author: Patrick Fox, E.I.T. SUBMITTAL PROCEDURES File: Hominy WLX Page 10 of 89

3. Any other information necessary to show compliance with the specifications.

E. Identify variations from the Contract Documents and product or system limitations that may be detrimental to successful performance of the completed work.

F. Identify and re-submit all changes made since previous submittal.

G. Distribute copies of approved submittals to concerned parties, (i.e. suppliers, sub-contractors).

H. Communicate in writing any inability to comply.

I. Allow three weeks for submittal approval.

J. Replace unapproved materials at the Contractor’s expense.

Author: Patrick Fox, E.I.T. REFERENCE STANDARDS File: Hominy WLX Page 11 of 89

SECTION 01 42 19.0000

REFERENCE STANDARDS

Part 1 GENERAL

A. Section includes:

1. Organizations, associations, or appropriate agencies with jurisdiction that have references, standards, laws, or regulations cited in these specifications.

1.02 REFERENCES, STANDARDS, LAWS, OR REGULATIONS CITED IN THESE

SPECIFICATIONS

A. Use latest revision of all references, standards, laws, or regulations.

1.03 LIST OF ORGANIZATIONS, ASSOCIATIONS & AGENCIES

A. National Standards Organizations & Associations

American Association of State Highway and Transportation Officials (AASHTO) 444 North Capital Street NW, Suite 249 Washington DC, 20001

(202) 624-5800 www.aashto.org

American Concrete Institute (ACI) ACI International PO Box 9094 Farmington Hills, Michigan 48333-9094

(810) 848-3700 www.aci-int.org

American Society for Testing and Materials (ASTM) 100 bar Harbor Drive West Conshohocken, Pa 19428-2959

(610) 832-9585 www.astm.org

American Water Works Association AWWA 6666 West Quincy Avenue Denver, CO 80235

(303) 794-7711 www.awwa.org

National Electric Code (NEC) National Fire and Protection Association 1 Batterymarch Park Quincy, MA 02269-9959 1 888 632-2633 www.nec.com

National Electrical Manufacturer’s Association

(NEMA)

1300 North 17th Street Rosslyn, VA 22209

(703) 841-3200 www.nema.org

Underwriters’ Laboratories, Inc. UL 333 Pfingston Road Northbrook, IL 60062

(847) 272-8800 www.ul.com http://www.aashto.org/ http://www.aci-int.org/ http://www.astm.org/ http://www.awwa.org/ http://www.nec.com/ http://www.nema.org/ http://www.ul.com/

Author: Patrick Fox, E.I.T. REFERENCE STANDARDS File: Hominy WLX Page 12 of 89

B. Federal Agencies

Environmental Protection Agency (EPA) Region 6 1445 Ross Avenue Dallas, TX 75202 www.epa.gov/r6water/

Occupational Health and Safety Administration Region 6 (OSHA) 525 Griffin Street, Suite 602 Dallas, TX 75202 www.osha.gov

C. State Agencies

Oklahoma Department of Environmental Quality 707 N. Robinson P.O. Box 1677

OKC, OK 73102-6010

www.deq.state.ok.us

Oklahoma Water Resources Board 3800 North Classen Blvd.

Oklahoma City, OK 73118 405-530-8800 www.owrb.ok.gov http://www.epa.gov/r6water/ http://www.osha.gov/ http://www.deq.state.ok.us/

Author: Patrick Fox, E.I.T. QUALITY ASSURANCE File: Hominy WLX Page 13 of 89

SECTION 01 43 00.0000

QUALITY ASSURANCE

1. Prerequisites and procedures to assure the quality of construction.

1. Section 01 78 36.0000 – Warranties (if applicable).

1.02 QUALITY ASSURANCE

A. Perform work under the direction of personnel licensed in the state in which construction is located and where licensing of the trade is regulated by the state including, but not limited to:

1. Plumbing.

2. Well drilling.

3. Septic system installation.

4. HVAC.

5. Rock blasting.

6. Electrical work.

B. Control of Installation:

1. Perform work in accordance with the specifications.

2. Comply fully with manufacturers’ instructions.

C. If manufacturers’ instructions conflict with contract documents, request clarification from

Project Officer before proceeding.

D. Correct defective work to conform to the applicable specification.

1.03 DELIVERY, STORAGE, AND HANDLING

A. Inspect materials for acceptability when delivered to the site.

B. Store and handle materials to prevent damage.

1.04 WARRANTY

Author: Patrick Fox, E.I.T. QUALITY ASSURANCE File: Hominy WLX Page 14 of 89

A. Provide a minimum one-year warranty for all materials and labor, covering defects in the materials or deficiencies resulting from contractor installation.

B. Provide additional warranties as required by other sections.

PART 2 PRODUCTS (not used).

PART 3 EXECUTION (not used).

Author: Patrick Fox, E.I.T. CLOSEOUT PROCEDURES File: Hominy WLX Page 15 of 89

SECTION 01 77 00.0000

CLOSEOUT PROCEDURES

A. Section includes information on closeout procedures and site cleanup.

1. Section 01 78 00.0000 – Closeout Submittals.

1.02 ADMINISTRATIVE REQUIREMENTS

A. Final Inspection:

1. Send written certification that work is complete and ready for Final Inspection to the

Project Officer.

2. The Contracting Officer will schedule the Final Inspection at a day and time convenient to all parties.

3. Provide Record Drawings at the Final Inspection.

1.03 SITE CONDITIONS

A. Complete clean up before the Final Inspection.

B. Remove waste and erosions control devices, surplus materials, rubbish, and construction facilities from the site.

C. Punch List:

1. The Contracting Officer will provide a letter to the Contractor listing the deficiencies noted during the Final Inspection

2. Correct the deficiencies in conformance with the Specifications and Contract Drawings.

PART 2 PRODUCTS (not used)

PART 3 EXECUTION (not used)

Author: Patrick Fox, E.I.T. CLOSEOUT SUBMITTALS File: Hominy WLX Page 16 of 89

SECTION 01 78 00.0000

CLOSEOUT SUBMITTALS

1. The requirements for closeout submittals including:

a. Record drawings (as-builts)

b. Warranty information

c. General operation and maintenance information (if applicable)

1. Section 01 33 00.0000 – Submittal Procedures.

2. Section 01 77 00.0000 – Closeout Procedures.

1.02 DELIVERY

A. Provide all closeout submittals meeting this specification and specific requirements of each section.

1. Provide in required form.

2. Required before final payment is made.

1.03 DEFINITIONS

A. Record Drawing’s drawing showing:

1. The actual installation of facilities.

2. Changes from the plans with enough detail so that the facility can readily be located.

B. Ties: Measurements from permanent easily located objects to an installed object.

PART 2 PRODUCTS (not used)

3.01 RECORD DRAWINGS

A. Provide record data in one of the following manners:

1. On a set of project drawings, neatly draw swing tie measurements and changes.

2. On separate 8½ by 11 sheets, neatly draw site sketches, structure sketches, etc., indicating the necessary information.

Author: Patrick Fox, E.I.T. CLOSEOUT SUBMITTALS File: Hominy WLX Page 17 of 89

B. Provide three swing tie measurements to all buried utility objects that may need to be located in the future, including, but not limited to:

1. Gate valves.

2. Corporation stops.

3. Curb stops.

4. Water main fittings.

5. Couplings to existing water systems.

6. Cleanouts.

7. Sewer wyes.

8. Utility crossings.

9. Septic tank manholes and access covers.

10. Corners of drainfields.

C. Provide offset measurements and depths for buried utilities (e.g. water main) installed parallel to roads.

D. Provide revised elevation data for all items that have elevations shown on the plan drawings, including, but not limited to, the following:

1. Manhole inverts (inlet and outlet).

2. Manhole rims.

3. Pump station wet well and valve vault inverts.

4. Pump station wet well and valve vault rims.

5. Pump station wet well and valve vault pipe penetrations.

6. Float elevations.

7. Septic tank elevations.

8. Elevations of pipe entering and leaving structures.

9. Other elevations indicated on profiles.

E. Provide installed bid schedule items quantities for individual facilities on 8½ X 11 sheets.

Author: Patrick Fox, E.I.T. CLOSEOUT SUBMITTALS File: Hominy WLX Page 18 of 89

1. Project Officer may supply standard IHS forms for use by the Contractor.

Author: Patrick Fox, E.I.T. MISCELLANEOUS CAST-IN- PLACE CONCRETE File: Hominy WLX Page 19 of 89

SECTION 03 30 53.0000

MISCELLANEOUS CAST-IN- PLACE CONCRETE

A. This section includes provisions for miscellaneous cast-in-place concrete.

1. Section 33 11 31.2510 – Public Water Utility Piping PVC.

2. Section 33 12 16.1038 – Water Utility Distribution Gate Valves.

1.02 PRICE AND PAYMENT PROCEDURE

A. The cost of the concrete is incidental to the item installed.

1. There is no separate payment for the concrete.

1.03 REFERENCES

A. ASTM C33 – Standard Specification for Concrete Aggregates.

B. ASTM C94 – Standard Specification for Ready Mix Concrete.

C. ASTM C144 – Standard Specification for…