20-02705 Statement of work.pdf

S t

Statement of Work: Optical frequency comb with carrier envelope readout and optical beat detection

Use this Statement of Work document to purchase an item and/or item-related services.

TITLE: Optical frequency comb with carrier envelope readout and optical beat detection Requesting Lab/Division/Group: PML/688/(30)Time and Frequency Metrology Requisition Number: [to be entered by PR preparer]

Statement of Need Optical frequency standards require a method to transfer the high-stability optical output to the microwave and radio frequency domain. A fully contrained optical frequency comb, utilizing self-referenced carrier envelope stabilization as well as stabilization to the atomic optical reference can be used to produce microwaves that track the stability of the optical reference. This project is in need of a compact, stable, self-starting optical frequency comb to produce microwave from an atomic optical frequency standard.

Items and/or item-related services Section Requirements Related Information Items/Service (required)

Quantity one of an optical frequency comb with 250 MHz repetition rate, 1.5 micron oscillator, with carrier-envelope (Fceo) detection and 1156nm beat detection.

☒ See attached document for detailed specifications

Enter related information here

Shipping & Delivery ☐ N/A

12-16 weeks ARO ☐ Phased delivery is acceptable ☐ Software on USB / disk required ☐ Software electronic delivery acceptable Email address for software delivery

Enter related information here

Installation ☐ N/A

Installation requirements ☒ Site visit recommended

Setup visit would be helpful but is not necessary

Inspection and Acceptance ☐ N/A

Inspection and acceptance is expected to take 2 weeks.

☒ Government acceptance expected to take longer than 7 days

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable If you require an Extended Manufacturer Warranty, describe the warranty requirements.

Period Length:Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Training Training requirements Enter related information here

S t

Statement of Work: Optical frequency comb with carrier envelope readout and optical beat detection

☒ N/A Maintenance

☒ N/A

Describe your maintenance requirements.

☐See attached document for detailed maintenance specifications Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Repair ☒ N/A

Choose an item.

Describe your repair requirements.

Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

List any government furnished material/equipment here

Enter related information here

Travel ☒ N/A

Describe any travel requirements Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.).

Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Statement of Need