20-02705 Specifications.pdf
PDF 122 KB Posted
- Attached to
- Optical Frequency Comb Federal contract opportunity
- Solicitation number
- NB688000-20-02705
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis-Solicitation.docx | DOCX document | |
| 20-02705 Statement of work.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NB688XXX
Technical specification for Optical frequency comb with carrier envelope readout and optical beat detection
One (1) optical frequency comb with the following specifications:
• Er:doped modelocked laser oscillator o Laser Repetition rate is 250 MHz. 125 MHz and 1 GHz will also be considered.
o Center wavelength ~1560 nm o Spectral bandwidth of output >25 nm o Output Power of comb at 1550nm >20 mW o <1e-15 stability at 1s o Monitor port, SC/APC connector.
o Actuators for high bandwidth repetition rate and CEO frequency control.
o Oscillator with repetition rates of 125 MHz or 250 MHz should include an optical fiber interleaver PM fiber interleaver 1 GHz output repetition rate minimum, 2 GHz is preferred.
Fundamental mode suppression 25dB min Interleaver optical output power >15mW
• Fceo signal generation. Including:
o Dispersion managed optical amplifier.
o Non-linear fiber for spectral broadening.
Supercontinuum must also have good coverage at 1156nm.
Extra monitor output port for supercontinuum o Second harmonic generator.
o f-2f interferometer o Photodiode o SMA RF Output: Fceo signal with >40 SNR in 300KHz.
• Fbeat signal generation. Including o Input FC/APC connector for 1 mW of 1156nm cw light.
o Filtered supercontinuum beat note detection with 1156nm cw signal.
o Photodiode o SMA RF Output: Fbeat signal with >40 SNR in 300KHz.
• Control Electronics o All necessary pumps diodes with current and temperature controllers.
o USB or Ethernet monitoring and control.
o Locking servos for Fceo or Fbeat need NOT be included.
o RF input (2) for fast/slow stabilization of Frep.
o RF input (2) for fast/slow stabilization of Fceo.
o “Turn key” automatic mode-locking.
• 3U Rack format is preferred.
File details come from the government source that posted it. Updated .