2. Salient Characteristics.pdf
PDF 101 KB Posted
- Attached to
- CO2 Laser Cutter Machine Federal contract opportunity
- Solicitation number
- FA488722Q0011
About this file
This document provides the salient characteristics and statement of work for a solicitation seeking a 1kW CO2 laser cutting system. The solicitation requires the laser cutting system to meet minimum specifications including 1000W average power, 2.5kW peak power, full flying optics, vacuum hold down bed, 1500 in/min cutting speed, 0.001" positioning accuracy, 0.0002" repeatability accuracy, and the ability to cut 0.125" thick aluminum sheet metal. The system must include fume extraction, chiller, freight, on-site installation, startup, and a minimum of 3 days of on-site training for 2 personnel. Quotes must be emailed to the point of contact at Luke Air Force Base in Arizona by 4 May 2022 at 4:00PM PDT. All questions are due by 27 April 2022 at 2:00PM PDT. The solicitation is being conducted by the Department of the Air Force Air Education and Training Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| COMBO - FA488722Q0011.pdf | ||
| 1. Statement of Work.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Laser Machining Equipment
• Laser fully assembled and installed, including exclusion zones/minimum clearances and excluding support equipment, cannot exceed 160” wide x 220” long x 100” height
• Equipment must operate on existing electrical circuits in facility o Laser machine: 380V, 3PH, 60HZ, 50A o Blower/Vacuum Bed/Fume evacuation (support equipment): 1900 cfm, 208-230V, 3PH, 60HZ, 15A, 5HP. Contractor will be required to provide specific duct size in order for government to complete assembly of fume evacuation system o Chiller (support equipment): 90,000 BTU/Hr, Air Cooled, 20 GPM, 50 PSI, 460- 480V, 3PH, 60HZ, 25A, Corrosion Inhibitor Optishield Plus: 5 Gallons
• Laser machine must have the following minimum o 1000W average power and 2.5KW peak power sealed CO2 laser o Full flying optics system o Vacuum hold down bed and machine interlocked fume extraction o Working range of 50” X and Y axis, and 9” Z axis o 1500 in/min cutting speed o Positioning accuracy of 0.001” o Repeatability accuracy of 0.0002” o Ability to etch and cut metal, plastics, wood, composites, fabrics, rubbers o Must be able to cut 0.125” thick aluminum sheet metal o Interfacing that supports DXF, AI, DWG, JPG, TIF, file import o Palletized loading with front and rear pass through o 50" x 50" Universal Pallet Assy, metal points/slats o Enclosure with appropriate laser safety rating and safety interlocks on all covers and enclosure to protect machine and operators o Auto focusing system with height sensor for metal materials, automatically adjusting during cut for correct distance (this allows use of warped/imperfect material) o Metal points/slats cutting table
• Must include freight, on-site installation and startup of equipment
• Must include minimum 3 days of on-site training on equipment interface, operation and maintenance for at least 2 personnel (The government is not responsible for contractor lodging or travel).
• If Laser machine, excluding peripheral components, exceeds 3,000 pounds then rigging must be included
File details come from the government source that posted it. Updated .