Specifications Revised.pdf
PDF 37 KB Posted
- Attached to
- FCI Thomson - Refinish Epoxy in Showers Federal contract opportunity
- Solicitation number
- 15BBNF26Q00000020
About this file
This is a Statement of Work (SOW) for FCI Thomson's Project 25Z4AG6, which requires the refinishing of epoxy in housing unit showers. The contractor must provide Everlast® brand epoxy materials (or equivalent products) for application to 4,000 square feet of shower floors and 3,100 linear feet of integral cove bases.
The required materials include: EEFL001 Industrial Floor epoxy (100 percent solids with marble-chip and quartz aggregate, 1/8 to 3/16-inch thickness, compliant with USDA guidelines for federally inspected facilities); EEFL007 Integral Cove & Wall (three-component system with 4-inch cove); EFLY-W046 Slip Resistance Additive Medium; EEFL003 Stay-Clean Sealant; EEVF-200 Verti Fill (for mixing and subfloor priming); and EE380F Mini Fibers (to prevent sagging during curing). The floor system shall be 100 percent solid, unpigmented epoxy resin requiring no primer, bond coat, grout, or sealer components, with resin-rich composition of not less than 4.8 fluid ounces of epoxy per square foot. Color selection will occur post-award. Product installation instructions must be included with the delivery.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation 15BBNF26Q00000020.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FCI Thomson
B&F Project 25Z4AG6 Refinish Epoxy in Housing Unit Showers
Provide the following materials to epoxy shower floors:
EEFL001 Everlast® (or equivalent) Industrial Floor: A 100 percent solids epoxy, marble-chip and quartz aggregate that is a troweled in place, evenly textured, slip-resistant finish of between 1/8 inch (3 mm) and 3/16-inch (4.8 mm) thickness. Color will be selected by FCI Thomson after contract is awarded. Floor system shall be a 100 percent solid, unpigmented epoxy resin system.
System shall not require primer, bond coat, grout or sealer components for application. System shall be resin rich which means that the fluid component of the floor shall not be less than 4.8 fluid ounces of epoxy per square foot. System shall comply with the USDA guidelines for use in federally inspected facilities.
EEFL007 Everlast® (or equivalent) Integral Cove & Wall A three-component, integral troweled base and cove consisting of an Everlast Epoxy proprietary resin and hardener, silica quartz and marble-chip aggregates as used in the floor, and finely graded silica aggregate, 4-inch cove.
EFLY-W046 Everlast® (or equivalent) Slip Resistance Additive Medium
EEFL003 Everlast® (or equivalent) Stay-Clean Sealant: Provide enough sealant to produce a sandpaper-like finish.
EEVF-200 Everlast® (or equivalent) Verti Fill for use in mixing with Everlast Integral Cove & Wall to make a more viscous material to fill cracks and in the subfloor, as well as to create a primer for the cove base.
EE380F Everlast® (or equivalent) Mini Fibers for use in mixing with Everlast Integral Cove & Wall resins to keep the material from sagging while it cures.
Include product installation instructions.
Total floor square foot = 4,000
Total linear feet of integral cove = 3,100
| RCA 6 - IGE Form.pdf |
| IND GOVERN ESTIMATE |
| Cost Basis Data - Direct Costs |
| Cost Basis Data - Indirect Cost |
File details come from the government source that posted it. Updated .