Sol_140G0121Q0054_Amd_0002.pdf

(x)

140G0121Q0054 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

GRB

RESTON VA 20192

12201 SUNRISE VALLEY DRIVE

205 NATIONAL CENTER

USGS OAG RESTON ACQUISITION BRANCH

03/08/20210002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

02/03/2021

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

INSTALLATION OF FACILITY SECURITY ACCESS CONTROL SYSTEM

Legacy Doc #: UGS

The purpose of this Amendment is to provide Attachment 3 revised Appendix 1 Photos and

Diagrams, Attachment 4 Information Security Requirements Summary, revisions to the

Statement of Work, and Questions with Answers. The solicitation deadline is extended to

03/23/2021.

The following items in the Statement of Work have been revised as shown, and will be incorporated into the contract:

B. Technical Requirements iii. The Contractor shall provide all necessary equipment, labor, Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Susan Ruggles

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0121Q0054/0002 and tools required to provide the following facility exterior doors: 1. Eleven (11) doors are single steel exit doors with Sargent 8100 Series mortise locksets equipped with door closers, two in building 1, four in building 2, 3 in building

3 and 3 in building 4.

B. Technical Requirements ix. The door designated the main entrance in each building will be furnished with a keypad/ card reader combination.

B. Technical Requirements xix. Contractor shall have on-staff technicians factory-trained in servicing installed equipment. During the warranty period, contractor will be capable of servicing or repairing equipment on-site within

48 hours of notification by CAFRL of requesting warranty service or repairs.

In addition, questions and answers follow:

1. Can we use existing fiber that runs between buildings, if a strand is free? If your system can work with the spare fiber optic pairs you may use them.

2. Will standard card readers be used at gates?

The gate will have a PID card reader/keypad combo that will be installed in the near future. Wiring will be supplied from the gate to the second-floor mechanical room where the key card head end will be located.

3. What is the model # and manufacturer of gate controller? The closer manufacturer is Nice

HySecurity, the model is Slide Smart DC HD25.

4. What is brand and model of the intrusion system? The intrusion system is a Simplex 3001, with NAPCO Gemini Gem-P9600 controls.

5. What is brand and model of the fire system?

The fire system is a Notifier Fire Warden 100.

6. Are we, the contractor, to replace door that needs replacing? If so, what are the dimensions of the door? Yes, the door replacement is to be included in the bid. The R.O. for the door is 6'W x 7'T, there are two 35 1/2" doors (dimensions are approximate).

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0121Q0054/0002

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110