A06_Specifications_Automatic_Autoclave_Sterilizer.pdf

SPECIFICATIONS

Project: Automatic Autoclave Seam Sterilizer

PR Number:

Item:

1 Product Features

Name of Item: Automatic Autoclave Steam Sterilizer

Manufacturer: Tuttnauer

Model Number: 3870EA

Salient Characteristics:

• Stand

• Two Instrument Trays and one holder

• ChamberBrite Cleaner

• Drain Tube

• Operators Manual

• Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches.

• Hepa filter 0.2 µm air filter (replaceable).

• Rapid cycles optimize the availability of ready-to-use sterile instruments

• Easy-to-use, single touch control system increases productivity

• 3 Pre-set sterilization programs

• Program and customize cycle parameters to suit your needs and maximize flexibility

• Integrated printer for cycle documentation (optional)

• Interdependent temperature and pressure monitoring

• Cycle information recovery in the case of power failure or cycle interruption

• Insufficient water detector with automatic shut-off

• Supplied with a 3 shelf stand that measures 26 inches wide x 33 inches deep x 34 inches high

Capabilities (if applicable): The Tuttnauer 3870EA fully automatic autoclave is Tuttnauer's largest automatic tabletop autoclave. Features a closed door active drying system. Perfect for multi-doctor practices, clinics or surgery centers. 15"x 30" chamber accommodates longer instruments or a large number of small instruments. Capacity for 15 full size IMS cassettes. Ideal for biotechnology industries, life sciences and a favorite among veterinarians.

2. Delivery

Prices quoted must be FOB Destination

“F.o.b. destination” means --Free of expense to the Government delivered, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or “constructive placement” as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including

“piggyback”) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National

Motor Freight Classification for “heavy or bulky freight.” When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested.

If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery when required, if transfer to truck is required to complete delivery to consignee.

Contractor responsibilities. The contractor shall --

(1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

3. Delivery Location:

Product shall be delivered to the following location:

Bozeman FTC

4050 Bridger Canyon Road

Bozeman, MT 59715

4. Installation:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.

5. Technical Point of Contact (POC):

Lacey Hopper

Bozeman FHC Project Leader

Lacey_Hopper@fws.gov

Office: (406)582-8656 Ext: 201

Cell: (406)551-3444

Kris Johnson

Facilities and Asset Maintenance Coordinator kristopher_b_johnson@fws.gov

1380 South 2350 West

Vernal, UT 84078

Office: 435-789-0351 ext. 16

Cell: 435-299-5150

6. Delivery Instructions: Not Applicable

No later than three days prior to delivery, please contact the Point of Contact listed above, to arrange a specific time for delivery. Unloading the product is the sole responsibility of the delivery carrier. No labor or equipment will be provided by the government to unload the supplies.

7.0 Customer Specific Delivery requirements: Please deliver to the Bozeman Fish Technology

Center main office building designated as the ‘Piper Building.’

Please note, the delivery location cannot accommodate vehicles that are longer than 30’.

8.0 Installation:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.

mailto:Lacey_Hopper@fws.gov mailto:kristopher_b_johnson@fws.gov