Sol_140F0718R0001_Amd_0003.pdf

(x)

140F0718R0001 x x copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

F07

ANCHORAGE AK 99503-6199

1011 E TUDOR ROAD

FWS, DIVISION OF CONTRACTING AND GE

11/22/20170003

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

11/14/2017

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

LIST OF CHANGES:

Add answers to questions. Bid due date remains unchanged.

All other terms and conditions remain unchanged.

Period of Performance: 02/01/2018 to 04/10/2018

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Anthony Kuntz

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

Questions and Answers

Purchase Request: 40364023

Solicitation: F0718R0001

Amendment: 0003

1. What is the make and model of the engines?

Answer: Caterpillar 3412, 1200RPM, 425 hp each.

2. How many gallons of coolant should the contractor expect from each ME?

Answer: 110 gallons per engine.

3. What is the model and size keel coolers for ME?

Answer: Fernstrum DX1660d

4. What is the make and model of the generator engines?

Answer: John Deere 6076ATF

5. How many gallons of coolant should the contractor expect from each generator?

Answer: 55 gallons each

6. What is the model and size of the keel coolers for the generators?

Answer: Fernstrum D10156d

7. Is the contractor required to use the engine manufacturer’s recommended coolant?

Answer: No, the current coolant is Chevron ELC 50/50 mix

8. What style zincs are in the sea chest? Bolt on or welded?

Answer: Welded on 12”, 1 per chest.

9. Request drawings with sizes of shafting and prop components.

Answer: See attached

10. Request drawings with sizes of shafting and rudder components.

Answer: See attached

11. Request drawings with sizes of tail shaft components.

Answer: See attached

12. Request drawings with sizes of shafting components.

Answer: See attached

13. How many UT shots will the contractor take for the hull inspection?

Answer: 150 – 200 shots

14. What is the serial number of the aft crane?

Answer: Slattery model MCT 537, Serial # MCT-537-86-283

15. Request aft crane installation instructions.

Answer: N/A

16. Request technical publication for aft crane.

Answer: Will provide after contract award. Currently unavailable.

17. What size are the portlights?

Answer: 16#

18. What type of materials are the portlights?

Answer: Spigots ar 316SS (to be installed) Original spigots are mild steel and welded in

19. Are the spigots bolt on or welded?

Answer: Welded

20. What size and style is the cargo hatch?

Answer: Deleted from this solicitation

21. What size and style is the aft stores hatch?

Answer: 37” X 47” clear opening, 8” tall coaming, flush top.

22. What is the issue with the MSD?

Answer: Shuts down before completing cycle. No longer a requirement on this solicitation.

23. What brand and model is the MSD?

Answer: Evac Orca II-24

24. For the Dry-dock, is a “Travel-Lift” acceptable if the vessel is blocked according to the docking plan per specified vessel?

Answer: Not sure how a “travel Lift” works. A proposal that includes a “Travel Lift” will be considered subject to acceptance of this method.

25. Are each individual “price estimates” an estimate or actual bid?

Answer: The solicitation is amended to “BID”

26. What paint system is required in the chain locker?

Answer: Suggest it be the same as the holding tank.

27. Item #25 Aft Crane Remove/Reinstall. The first bullet point directs contractor to remove the crane pedestal. The second to last bulletin states to reinstall the crane on a new pedestal. Is the owner providing a new pedestal?

Answer: REPAIR AND REINSTALL ORIGINAL PEDESTAL UNLESS IT IS FOUND TO BE BEYOND

ECONOMICAL REPAIR.

28. Item #25 Aft Crane Remove/Reinstall. The second and third bullet points directs the contractor to make modifications to the crane boom. Have these changes been engineered and approved by a Professional Engineer as required by 29 CFR 1917.45(b)(3)? If so, please provide that document.

Answer: NO REPLY

29. Item #25 Aft Crane Remove/Reinstall. The specification is silent regarding testing. Please provide a test memo.

Answer: WE MAY MAKE SEPARATE ARRANGEMENTS FOR TESTING.

30. Is Item #25 Aft Crane Remove/Reinstall. there a technical manual available? If so, please provide.

Answer: N/A

31. Item #25 Aft Crane Remove/Reinstall. Please provide details regarding the two Nylatron sleeves: diameter, width, does it have bushings?

Answer: SHEAVES. NO DRAWINGS AVAILABLE.

32. Item #25 Aft Crane Remove/Reinstall. Is the existing tubing from the crane that connects to the piping to be replaced?

Answer: RETAIN ORIGINAL SS TUBING IF PRACTICAL, REPLACE WITH NEW IF NOT.

33. Topside Paint Items. The paint specifications are ambiguous on whether the final coat is a spot to the affected areas or an overall full coat. Please clarify.

Answer: Overall full coat.

34. Potable water tank coatings are not included with the “Paint Schedule”. Please provide Answer: ATTACH 2014 TIGLAX PAINT SCHEDULE. NOTE: SOME PRODUCTS IN 2014

SPECIFICATION PROBABLY WILL HAVE NEW EQUIVALENT PRODUCTS AVAILABLE FROM

INTERNATIONAL PAINT.

35. Will the crew be responsible for sanitizing the tank upon completion of repairs?

Answer: Yes

36. In item 11 AFT stores what are the 2 cubby spaces?

Answer: The cubby spaces in item 11 involve less than 20 square feet counting both.

R/V Tiglax paint schedule

Manufacturer: International Paint

Vessel exterior above bottom paint, bulwarks, mooring bitts, forward crane, windlass, trawl winches, upper stack trunk:

QHA027/QHA028 Interzinc Inorganic Zinc

FPJ034/FPA327 H.S. Light Gray Universal Epoxy

PCE992/PCA001 Interthane Ocean Blue Urethane

House and railings, aft crane, mast, lower stack trunk:

QHA027/QHA028 Interzinc Inorganic Zinc

FPJ034/FPA327 H.S. Light Gray Universal Epoxy

PCD053/PCA001 Interthane Stone Finish

Exterior Decks, deck hatches, cloverleafs, ladder treads, door steps:

QHA027/QHA028 Interzinc Inorganic Zinc

FPJ034/FPA327 H.S. Light Gray Universal Epoxy

FPJ034/FPA327 H.S. Dark Gray Universal Epoxy

Exposed steel in engineroom and aft stores above grating, bulkheads and overhead in foc’sle, fan rooms, fiddley, boiler enclosure:

QHA027/QHA028 Interzinc Inorganic Zinc

KTA501/KTA044 Intertuf Surface Tolerant Epoxy

PCB000/PCA001 Interthane Urethane White Finish

Tank tops, bilges below gratings, cargo hold:

KTA501/KTA044 Intertuf Surface Tolerant Epoxy

KTA501/KTA044 Intertuf Surface Tolerant Epoxy

Bottom paint: Compare to 2010 paint schedule

Interspeed 640

BRA 640 Red

BRA 642 Black

Y5584 Shark White for underwater draft marks

Holding Tank and chain locker:

International Interline 624

THA 626 Buff Primer

THA 625 Gray Topcoat

THA White Topcoat

Ballast Tanks:

Intergard 264 FPJ 034 Light gray

Potable Water Tanks:

Interline 925

THA 125/THA 127 White