13449800- material order data.pdf
PDF 123 KB Posted
- Attached to
- ELECTRODE Federal contract opportunity
- Solicitation number
- SPMYM2-22-P-0749
About this file
This document contains a solicitation for electrodes and related ordering data. The solicitation is seeking quotes for electrodes in accordance with specification MIL-E-23765/2E, including type MIL-100S-1 electrodes in coil form with a 3/32 inch size. Level A packaging and Level C packing is required, as well as special marking per the specification. The ordering data provides additional requirements for the copper and phosphorus content, mechanical properties, and stress-relieved testing. Quotes are due to the Defense Logistics Agency Land and Maritime and must include the offeror's cage code or DUNS number, SAM registration status, pricing FOB Destination to Bremerton, Washington, lead time, manufacturer details, and a signed copy of the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 22-Q-0749 SOLICITATION.pdf | ||
| 13349801- CDRL.pdf | ||
| 13349800 - CDRL.pdf | ||
| 13349801- material order data.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-E-23765/2
IDN: N4523A 1344-9800
ICN: 38PAA56601 KO: S01 KOI: 007
Paragraph 6.2 Ordering Data
A. MIL-E-23765B, ELECTRODES AND RODS- WELDING, BARE, SOLID AND ALLOY
CORED; GENERAL SPECIFICATION FOR, dated 22 AUGUST 1985, including AMENDMENT 1, dated 15 SEPTEMBER 1989.
B. MIL-E-23765/2E, ELECTRODES AND RODS - WELDING, BARE, SOLID, OR ALLOY
CORED; AND FLUXES, LOW ALLOY STEEL, dated 22 APRIL 1994.
C. TYPES: MIL-100S-1
FORMS: Form 3c - Electrode wound on coils with support SIZES: 3/32 inch
D. First article test is not required.
E. Alloy identity testing of each electrode or rod after final marking is not is required F. Length of rods required: N/A G. Level A packaging and Level C packing is required.
H. Special marking per the spec is required.
Additional Requirements:
N/A
MIL-E-23765/2E Paragraph 6.2 Ordering Data
A. The copper and phosphorus content should not be restricted.
B. Whether higher maximum yield strength is allowed: N/A C. The required mechanical properties for type MIL-120s test welds, which have been stress-relieved: N/A D. Time at the stress relief temperature shall be per spec.
E. Whether type MIL-100s or MIL-120s weld metal test plates should be tested for conformance with stress-relieved requirements: N/A.
F. Which specific brand name electrode and flux combination(s) shall be used for conformance testing: N/A G. Other base metal steel for use in testing in the stress-relieved condition, if required: no other base metal steels are required.
H. A second test weldment is not required for quality conformance testing in the as-welded condition.
I. Whether bags and drums shall be palletized for shipment: N/A.
J. Shielding gas required for GMAW shall be: N/A.
Figure 3, Note 3: The neutral granular flux for the SAW process shall be in accordance with 4.2.1 or 4.2.3 herein which is consistent with MIL-type electrodes being tested:
MIL-100S-1F
QPL Applies.
Additional Requirements:
N/A
Prepared By: Jordan Mize Code: Code 260V
File details come from the government source that posted it. Updated .