13349801- material order data.pdf
PDF 123 KB Posted
- Attached to
- ELECTRODE Federal contract opportunity
- Solicitation number
- SPMYM2-22-P-0749
About this file
This document contains ordering data and specifications for electrodes and rods for welding. The materials ordered include bare, solid, and alloy cored electrodes and rods in sizes of 3/32 inch diameter. The electrodes must meet specifications MIL-E-23765/2E and be type MIL-100S-1F. Packaging must be in accordance with level A for bags and level C for packing. Marking and other requirements such as mechanical properties and composition restrictions are provided. Accompanying this is a federal contract solicitation to supply electrodes meeting these specifications. Responses are due as indicated on the solicitation and must include contracting information such as the vendor's CAGE code and SAM registration status. Pricing terms and other details such as manufacturer, lead time, and place of performance are also required.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 13449800- material order data.pdf | ||
| 22-Q-0749 SOLICITATION.pdf | ||
| 13349801- CDRL.pdf | ||
| 13349800 - CDRL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-E-23765/2
IDN: N4523A 1344-9801
ICN: 38PAA56601 KO: S01 KOI: 008
Paragraph 6.2 Ordering Data
A. MIL-E-23765B, ELECTRODES AND RODS- WELDING, BARE, SOLID AND ALLOY
CORED; GENERAL SPECIFICATION FOR, dated 22 AUGUST 1985, including AMENDMENT 1, dated 15 SEPTEMBER 1989.
B. MIL-E-23765/2E, ELECTRODES AND RODS - WELDING, BARE, SOLID, OR ALLOY
CORED; AND FLUXES, LOW ALLOY STEEL, dated 22 APRIL 1994.
C. TYPES: MIL-100S-1F
FORMS: Form 3c - Electrode wound on coils with support SIZES: 3/32 inch
D. First article test is not required.
E. Alloy identity testing of each electrode or rod after final marking is not is required F. Length of rods required: N/A G. Level A packaging and Level C packing is required.
H. Special marking per the spec is required.
Additional Requirements:
N/A
MIL-E-23765/2E Paragraph 6.2 Ordering Data
A. The copper and phosphorus content should not be restricted.
B. Whether higher maximum yield strength is allowed: N/A C. The required mechanical properties for type MIL-120s test welds, which have been stress-relieved: N/A D. Time at the stress relief temperature shall be per spec.
E. Whether type MIL-100s or MIL-120s weld metal test plates should be tested for conformance with stress-relieved requirements: N/A.
F. Which specific brand name electrode and flux combination(s) shall be used for conformance testing: N/A G. Other base metal steel for use in testing in the stress-relieved condition, if required: no other base metal steels are required.
H. A second test weldment is not required for quality conformance testing in the as-welded condition.
I. Whether bags and drums shall be palletized for shipment: N/A.
J. Shielding gas required for GMAW shall be: N/A.
Figure 3, Note 3: The neutral granular flux for the SAW process shall be in accordance with 4.2.1 or 4.2.3 herein which is consistent with MIL-type electrodes being tested:
MIL-100S-1F
QPL Applies.
Additional Requirements:
N/A
Prepared By: Jordan Mize Code: Code 260V
File details come from the government source that posted it. Updated .