Q and A .pdf
PDF 82 KB Posted
- Attached to
- Thermomechanical Analyzer (TMA)-Amendment 1 Federal contract opportunity
- Solicitation number
- 1333ND24QNB030429
About this file
This document is a set of Questions and Answers related to a federal contract opportunity for a Thermomechanical Analyzer (TMA), temperature or environmental control system, software, and related accessories.
The key details are:
- The requirements state the force control shall operate in expansion, penetration, tension, and 3-point bend modes, and the quotation should include all relevant probes and accessories to access these modes.
- The related federal contract opportunity is for the procurement of the TMA system, which the contractor shall install at the National Institute of Standards and Technology (NIST) and provide on-site training.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Solicitation.docx | DOCX document | |
| Attachment B - Experience Data Sheet.docx | DOCX document | |
| Attachment A -Requirements Document.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions 1:
The requirements state: “The force control shall operate in the following modes: expansion, penetration, tension, 3-point bend, dynamic thermomechanical analysis.”
Does this mean that the quote should include all the physical accessories required to perform tests in expansion, penetration, tension, and bending mode? Are any other specialty probes required such as a volumetric probe or hemispherical probe?
Answer 1:
The quotation should include all relevant probes and accessories to access all of the modes listed.
File details come from the government source that posted it. Updated .