12_Special_Packaging_Instructions.pdf

PDF 300 KB Posted

Attached to
T-38 EXPLOSIVE ROTARY ACTUATOR Federal contract opportunity
Solicitation number
FA8213-20-R-0109
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

This document provides packaging instructions and specifications for an explosive rotary actuator required by the Department of the Air Force Materiel Command Lifecycle Management Center. The packaging must meet international standards for wood packaging material to prevent the spread of invasive species. All wood materials used in pallets, containers, or other wood packaging must be debarked and heat treated to a minimum temperature of 56 degrees Celsius for 30 minutes. Certification from an accredited agency is also required. The related solicitation seeks 67 explosive rotary actuators identified as National Stock Number 1377010497586ES for the T-38 aircraft. Bids are due within 12 months of receipt of the solicitation and the contract period will extend until all assets are returned to Air Force supply in serviceable condition.

View the file

Other files for this federal contract opportunity

Other files attached to T-38 EXPLOSIVE ROTARY ACTUATOR, newest first.
File Type Posted
Solicitation FA821320R0109.pdf PDF
9_Contract_Data_Requirements_List.pdf PDF
17_GFM.pdf PDF
11_SOW_for_Packaging_and_Preservation.pdf PDF
3_Quality_Assurance_Letter_of_Instruction.pdf PDF
10_AFMC_Form_158_Packaging_Requirements.pdf PDF
1_SOW_T38_Actuator.pdf PDF
8_CADPAD_Item_Marking.pdf PDF
13_Item_Description.pdf PDF
Solicitation FA821320R3023.pdf PDF
5_RESHIP_of_HAZMAT.pdf PDF
Show all 11

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 17 APRIL 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

MUNITION NOTICES

NOTES

1. WRAP ITEM WITH REF.-3 THEN PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL.

2. USE CUSHIONING, REF.-1, AS REQUIRED TO PROVIDE A SECURE FIT AND PREVENTING MOVEMENT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

REFER TO MIL-STD-129 FOR MARKING

REQUIREMENTS OF PALLETIZED UNIT

LOADS OF AMMUNITION.

File details come from the government source that posted it. Updated .