10_AFMC_Form_158_Packaging_Requirements.pdf
PDF 689 KB Posted
- Attached to
- T-38 EXPLOSIVE ROTARY ACTUATOR Federal contract opportunity
- Solicitation number
- FA8213-20-R-0109
About this file
This document contains packaging requirements and instructions for a federal solicitation. The solicitation is for 67 explosive rotary actuators identified by national stock number 1377010497586ES. The actuators must be packaged according to Military Standard 2073-1 and hazardous materials must be prepared for shipment in compliance with applicable DOT, ICAO, and IMDG regulations. Wooden packaging must be heat treated in accordance with ISPM 15. The delivery date is 12 months after receipt of order and the contracting agency is the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation FA821320R0109.pdf | ||
| 1_SOW_T38_Actuator.pdf | ||
| 8_CADPAD_Item_Marking.pdf | ||
| 9_Contract_Data_Requirements_List.pdf | ||
| 17_GFM.pdf | ||
| 11_SOW_for_Packaging_and_Preservation.pdf | ||
| 3_Quality_Assurance_Letter_of_Instruction.pdf | ||
| 12_Special_Packaging_Instructions.pdf | ||
| 13_Item_Description.pdf | ||
| Solicitation FA821320R3023.pdf | ||
| 5_RESHIP_of_HAZMAT.pdf |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
AFMC FORM 158, 20150424
PR, MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
MIL-STD-129
MARKING
(X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)
B. PACKAGING OF HAZARDOUS MATERIALS
C. PACKAGING DATA (Coded and/or Special Packaging Instructions)
D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)
E. WOOD PACKAGING MATERIAL ISPM 15
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUANTITY
QUP ICQ
PRES
METH
C D
PRES
MTL
WRAP
MTL
CUSH
DUNN
C T
UNIT
CONT
INT
CONT
U C L
SPEC
MKG
O P I
UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE
10 LENGTH 1000THWHOLE CUBE10 WIDTH 10 DEPTH 10
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
AFMC FORM 158, 20150424 Page 2 of 2 Pages
ADDITIONAL INFORMATION
PACKAGING REQUIREMENTS
AFMC FORM 158, 20150424
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X) (A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X) (X)
MIL-STD-129
MARKING
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUANTITY
QUP
ICQ
PRES METH
C D
PRES MTL
WRAP MTL
CUSH DUNN
C T
UNIT CONT
INT CONT
U C L
SPEC MKG
O P I
UNIT PACK WEIGHT
UNIT PACK SIZE
UNIT PACK CUBE
LENGTH
1000TH
WHOLE CUBE
WIDTH
DEPTH
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
AFMC FORM 158, 20150424
Page 2 of 2 Pages 11.0.1.20130826.2.901444.899636
| TextField1: F2DCDE9297B101 (FD2020-20-50109) |
| TextField1: 406 SCMS/GULAA |
| TextField1: DUSTIN HALE DSN 777-8841 |
| CheckBox1: 0 |
| CheckBox1: 1 |
| CheckBox1: 0 |
| CheckBox1: 1 |
| CheckBox1: 1 |
| TextField3: 1377-01-049-7586 |
| TextField3: 001 |
| TextField3: X |
| TextField3: B |
| TextField3: X |
| TextField3: F00-407-9649 |
| SignatureField1: |
| DateField1: 2020-02-21 |
| TextField4: |
B. Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation:
(a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200;
(b) Code of Federal Regulations (CFR) Title 49;
(c) Air Force Manual (AFMAN) 24-204_IP, Preparing Hazardous Materials for Military Air Shipment;
(d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and
(e) International Maritime Dangerous Goods (IMDG) Code.
D. The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with Warranty Terms and Conditions.
E. ISPM:
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE
DOCUMENTATION, SEE “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM) NO. 15.” THIS DOCUMENT CAN BE FOUND AT www.ippc.int.
File details come from the government source that posted it. Updated .