1121-05 (042-B51) - Cables - Drawing_93513-D.PDF

REVINSPECTIONLOCATIONCCs

SUMMATION OF CCs

CRITICAL MAJOR MINOR

CLASSIFICATION OF CHARACTERISTICS (CCs)

CLASSIFICATION OF CHARACTERISTICS (CCs)

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE

AND THEIR CONTRACTORS: ADMINISTRATIVE/OPERATIONAL USE: 06 AUGUST 2008

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO NSWCDD,

ANTENNA PRODUCTION AND TESTING FACILITY, BLDG 1530.

23.00±.25

1 5

3 4

CUI

CUI

CONTROLLED BY: DEPARTMENT OF THE NAVY

CONTROLLED BY: NSWCDD, B51

CUI CATEGORY: CTI; EXPT

DISTRIBUTION/DISSEMINATION CONTROL: DISTRIBUTION D

POC: BRENT STEFFEY, B51, 540-653-0300

DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE

AND THEIR U.S. DOD CONTRACTORS ONLY: CRITICAL TECHNOLOGY; EXPORT CONTROLLED:

1/5/2023. OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, DAHLGREN DIVISION,

NAVAL SURFACE WARFARE CENTER, 17320 DAHLGREN RD, DAHLGREN VA 22448-5100.

WARNING - WARNING - THIS DOCUMENT CONTAINTS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (SECTION 2751 OF TITLE 22, UNITED

STATES CODE) OR THE EXPORT CONTROL REFORM ACT OF 2018 (CHAPTER 58 SECTIONS

4801-4852 OF TITLE 50, UNITED STATES CODE). VIOLATIONS OF THESE EXPORT LAW ARE

SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25 AND DOD INSTRUCTIONS 2040.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION

DOCUMENTS DESTORY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

FIND

NO.

QTY

REQD

CAGE

CODE PART NUMBER NOMENCLATURE OR DESCRIPTION MATERIAL

OR NOTE

PARTS LIST

6 AR SAE AMS-DTL-23053/

15-102-0 TUBING, HEAT SHRINK NOTE 7

5 AR IPC-J-STD-005 SOLDER NOTE 3,6

4 1 30990 7211919211

M23053/5-108-0 MARKER, TUBING, HEAT SHRINK

3 AR MIL-DTL-17/164-

00001(RG214) CABLE, COAXIAL

2 1 91836 MIL-PRF-39012/03-0012

OR KN-19-114 CONNECTOR, RECEPTACLE NOTE 6

1 1 30990 MIL-PRF-39012/01-0005

OR 3188022210 CONNECTOR , PLUG, TYPE N (M) GASKET NOTE 6&8

REVISIONS

REV DESCRIPTION DATE APPROVED

A REDRAWN WITH CHANGE. OLD DESIGN 55910-

0131550-A.

B ADDED NOTE 8. DELETED SUGGESTED SOURCE OF

SUPPLY TABLE.

C ADDED NOTE 10. CHANGED LENGTH DIM TO A REF

DIM. DELETED 2 PLACE TOLERANCE ON FORMAT.

D SEE NOR 93513-D. 9/16/2010 STR

1/1

93513

INTERPRET DRAWING IAW ASME Y14.100

-- .010 --

C. BRUBECK 09-03-16

DWG NO.

93513

G64

SH REV1 D

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY.

8 7 6 5 4 3 1

D

C

B

A

D

C

B

A

8 7 6 5 4 3 2 1

D-07609NEXT ASSY USED ON

APPLICATION DO NOT SCALE THIS DRAWING

MATERIAL:

REMOVE BURRS AND BREAK SHARP

EDGES .03 MAX

INSIDE CORNERS R .03 MAX.

SURFACE ROUGHNESS 125

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

GENERAL TOLERANCES

ANGLESXXX DECIMALSXX DECIMALS

ENGR

CHECKED

DRAWN

APPROVED FOR DATE

SIZE CAGE CODE

D

GIN DWG NO. REV

SCALE: WEIGHT: SHEET

DEPARTMENT OF THE NAVY

CABLE ASSEMBLY,

INPUT

NAVAL SURFACE WARFARE CENTER

DAHLGREN DIVISION

17320 DAHLGREN RD

DAHLGREN, VA 22448-5000

C:\Sokha Backup\_Q53\Q53\Projects\B52\Solidworks-Goodman Files\AS-4127A\NSWC DWG'S\ 93513 Monday, January 30, 2023 9:36:27 AM sokha.pann

ENGR

NOTES:

1. WORKMANSHIP ON THIS ASSEMBLY SHALL BE IN ACCORDANCE WITH MIL-HDBK-454, REQUIREMENT 9.

2. MARK IDENTIFICATION STRIP, FIND NO. 4, WITH "07609-93513", APPLICABLE DASH NO. AND ASSIGNED

SERIAL NO. IN .12 HIGH GOTHIC CHARACTERS IN ACCORDANCE WITH MIL-STD-130.

3. SOLDERING SHALL BE IN ACCORDANCE WITH MIL-HDBK-454, REQUIREMENT 5.

4. CABLE ASSEMBLY SHALL HAVE A MAXIMUM INSERTION LOSS OF .3 dB AND A MAXIMUM VSWR OF 1.15:1 IN THE 0.960 TO 1.215 MHz BAND.

5. ASSEMBLY OF CONNECTORS WITH CABLE SHALL CONFORM WITH MANUFATURER'S

SPECIFICATIONS.

6. CABLE ASSEMBLY BACK NUTS SHALL BE TORQUED TO 55 IN-LBS.

7. CABLE ASSEMBLY SHALL HAVE HEAT SHRINK TUBING, FIND NO. 6, APPROXIMATELY 2" LONG EACH END.

8. SUGGESTED SOURCE OF SUPPLY:

CARLISLE INTERCONNECT TECHNOLOGIES

2400 GRAND AVE.

LONG BEACH, CA. 90815

VOICE: 1-360-696-7427

OR 1-877-864-8735 (VANCOUVER)

OR 1-562-494-0955 (LONG BEACH)

FAX: 1-360-694-9230

9. INTERPRET DIMENSIONS AND TOLERANCING IAW Y14.5M-1994.

10. BEND RADIUS SHOULD NOT EXCEED 20X DIAMETER OF CABLE IN ORDER

TO MAINTAIN PROPER PHASE.

AS-

4127A/URC-

107(V) 93517

09-10-06STR

09-10-06D. MASON