1.1.4.i. Statement of Work - BORTAC Breaching Rollout Kits - Unison Posting - PR 20149959.pdf

Department of Homeland Security Customs and Border Protection

U.S. Border Patrol Special Operations Group

Border Patrol Tactical Unit Statement of Requirements

BORTAC Level 2 Energetic Breacher Roll-Out Kit

1.0 INTRODUCTION

This Statement of Requirements defines the equipment needs of the Department of Homeland Security (DHS), U.S. Customs and Border Protection (CBP), United States Border Patrol (USBP) in acquiring custom gear roll out kits for current and new members of the U.S. Border Patrol Tactical Unit (BORTAC) Level 2 Energetic Breaching Program.

2.0 BACKGROUND

Upon successfully completing the Border Patrol Tactical Unit’s (BORTAC) Level 2 Energetic Breacher Certification Course, BORTAC will need to issue all graduating members a standardized gear and equipment Roll-Out Kit. The BORTAC Level 2 Energetic Breacher Roll-Out Kit, as seen in “Attachment A,” for supplies and “Attachment B,” for the equipment provides BORTAC personnel with required items for use in conducting unit missions, specific to the role of the Level 2 Energetic Breacher. This Kit was developed through years of extensive research and field use and it evolves based on improvements in technology or when operational requirements necessitate change. In the past, some of the items that make up this kit have been purchased as individual pieces but have never procured as a standardized kit. Most personnel have received parts and pieces of this requested kit and a few full kits of needed equipment have been acquired after several years but in most cases not at all. This has proven to be a labor intensive and costly way of attempting to acquire all the equipment that is required to supply the current and new graduates of the selection and training course. The Contracting Officer’s Representative (COR) will be responsible for placing orders and the contractor will deliver them within a schedule outlined below.

3.0 SCOPE OF WORK

It is the intent of CBP/USBP/SOG to procure approximately ten (10) sets of the mission specific equipment to become the standardized roll out kits to equip current and newly certified BORTAC Level 2 Energetic Breacher Agents. In addition, this scope includes full replacement warranty, customer support necessary to account for the delivery and tracking of all roll-out bags purchased, and upgradeable equipment as needed to include size exchanges where appropriate.

3.1 Type of Award: Firm fixed price

3.2 Period of Performance

Delivery is desired 120 days from vendor receipt of award.

3.3 Place of Performance

To be delivered to BORTAC Headquarters Building 11169 SSG Sims Street Biggs Army Airfield, El Paso, Texas 79918

4.0 DESCRIPTION OF TASKS AND DELIVERABLES

Deliverables:

• The U.S. Border Patrol, SOG will not accept partial shipments for this order.

• The vendor will include a full equipment replacement warranty for the period of one year.

The warranty will commence on the date that all ordered roll-out kits have been delivered.

4.1 Equipment List:

The supply and equipment list is specified on “Attachment A” and “Attachment B.”

Bids are to be submitted on the entirety of the items outlined on the bid sheet. An equipment list will be provided with each BORTAC Level 2 Energetic Breacher Roll-Out Kit and will individually list all contents within each kit.

4.2 Packaging:

Each Level 2 Energetic Breacher Roll-Out kit will be self contained and will include all items on the “Attachment A” Supply list as well as “Attachment B” Equipment list.

4.3 Delivery Schedule:

All BORTAC Level 2 Energetic Breacher Roll-Out Kits will be delivered to:

US Border Patrol Tactical Unit

Building 11169, SSG Sims Street Biggs Army Airfield El Paso, TX 79918

4.4 Transportation and Inspection:

a. The contractor shall adhere to the following standards, as well as other appropriate guidelines in transporting.

1. Contractor shall store all items in appropriate, controlled, sealed containers while in transit.

2. Contractor shall inspect the BORTAC Level 2 Energetic Breacher Roll-Out Kits before shipment to ensure all items are present.

3. Items that need to be considered to ship separately due to sizing – or other -variations shall be coordinated and documented with the program Technical Representative(s) prior to shipment.

b. The Contracting Officer’s Representative (COR) or designated representative shall examine the BORTAC Level 2 Energetic Breacher Roll-Out Kits and ensure that all items are serviceable upon delivery.

1. Each kit will contain an itemized and descriptive inventory list.

2. CBP/USBP/SOG reserves the right to reject any item, product, or component thereof upon delivery which the COR or site supervisor has determined unacceptable due to patent or latent defects.

4.5 Proposal Submission / Pricing:

Pricing shall be provided on the unit issue of “each.” For this requirement, bidders shall only bid on the complete kits as identified in Attachment A and Attachment B that make up the BORTAC Level 2 Energetic Breacher Roll-Out Kit, and not individual items listed.

Note: Pricing must include the cost of packaging, transportation, and all other related costs.

Government entities are tax-exempt; therefore, sales tax shall not be included in price quotations.

5.0 GENERAL INFORMATION

5.1 Disclosure of Information

5.1.1 Any information made available to the contractor by the government shall be used only for the purpose of carrying out the provisions of this contract. This information shall not be divulged or made known in any manner to any persons except as may be necessary in the performance of the contract.

5.1.2 In the performance of this contract, the contractor assumes responsibility for the protection of the confidentiality of government records.

5.1.3 The contractor will adhere to the requirements found in Part 24 of the Federal Acquisition Regulation, Protection of Privacy and Freedom of Information.

5.2 Technical Contact

5.2.1 The Customs and Border Protection technical contact person may be contacted regarding the products, sizing or delivery specifications. Please contact one of the following:

TBD

5.2.2 All Contract administration matters will be handled by Contract Specialist.

5.2.3 Please submit all questions to the contracting representative via the bidding site.

5.3 Contractor Furnished Items

5.3.1 The contractor shall provide all materials, equipment, supplies, transportation, and personnel to carry out the terms of this contract.

5.4 Procedures for Payment

5.4.1 Billing and Payment instructions will be posted on the OF 347 Order Form, page 1, and on page two of the form in the Notes section.

“ATTACHMENT A”

BORTAC Level 2 Energetic Breacher Roll-Out Kit Supply List

The custom designed Level 2 Energetic Breacher Roll-Out Kit must have the following items. The items will be specific name brand with no substitute unless otherwise notated.

• ARC'TERYX ASSAULT 45- CROCODILE item # 17725: QTY: 1

A weatherproof Assault Pack that is carried when conducting Direct Action tasks that is also combat enabler capable. The main internal compartment is configured with Velcro® for the insertion of aftermarket modular pouches. The top zip pocket (with retention lanyard) stores mission essential personal items. Side zip pockets hold 3L water bladder and have a hydration port for external routing. Side grab handles allow for ease of transfer to ground mobility vehicle or non–standard tactical vehicle. Removable/scalable hip belt (with hip pods) allows for equal weight distribution. 22mm removable aluminum stays can be custom shaped to curvature of the spine or wearing with PPE. Dual density shoulder straps distributes weight over broad surface for sustainable long term carry.

Clamshell zipper opening provides easy access to main compartment

• LBX 3" LARGE OPEN WINDO POUCH COYOTE-TAN #LBX-1024 CT QTY: 1

3" window for quick viewing of contents. Secures by two heavy duty zippers will paracord pull tabs. Secures to interior of compatible packs with loop by heavy duty hook.

Two "grab & go" tabs for quick removal from loop panels.

• LBX MEDIUM WINDOW POUCH- COYOTE TAN #LBX-1016 CT QTY: 2

Medium window pouch w/ hook and loop backing for quick insert/removal. Clear window for easy item identification. Fits perfectly in Grab and Go Insert or KHARD series. Great for load out customization and organization.

• LBX PADDED SIDE POUCH COYOTE TAN #LBX-1021 CT QTY: 2

Large zippered central pouch. Internal hook and loop walls for additional attachments.

Two zippered mesh exterior pockets with quick pull tabs. Horizontal hook and loop on rear of pouch for quick, secure, attachment to customizable LBX packs. Perfect for medical, EOD, admin or standard pistols/magazines.

• LBX LARGE MESH POUCH- COYOTE TAN #LBX-0026 CT QTY: 2

10" Large mesh clam shell opening pouch w/ velcro backing. Fits well in all LBX packs as well as Arc'teryx Khard Series.

• LV-119 FRONT OVERT PLATE BAG item # PC-FO-MC-LG QTY: 1

The LV/119 SYSTEM is a group of products that work together to give end-users the ability to scale their equipment to their current needs. The fact that this is a cohesive system means that users can mix and match accessories in most cases. The SYSTEM encompasses many parts, some of which are currently available and some that are in development, such as Back Panels of various types, MOLLE cummerbunds, First Spear TUBES™ integrations, and different placards. The front bag features a 3 Row / 4 Column MOLLE field that doubles as a 6” x 3” Velcro Field. This may be used to attach End User Devices (EUDs), such as those made by KAGWERKS or Juggernaut Defense.

The Velcro may be used to mount placards, patches, and IR identifiers. The MOLLE can also be used to mount administrative pouches, breaching charges and initiating systems, or anything else users may require quick need access to. Every front plate bag comes standard with sewn loops on the sides for attaching First Spear TUBES™ for use with our TUBES™ cummerbund which will provide the end user easy access to don and doff the system.

• LV-119 REAR OVERT PLATE BAG item # PCRS-SA-PC-RO-MC-LG (SA-L)

QTY: 1

The LV/119 SYSTEM is a family of products that work together to give end-users the ability to scale their equipment to their current needs. The fact that this is a cohesive system means that end-users are able to mix and match accessories in most cases. The SYSTEM encompasses many parts, some of which are currently available and some that are in development. These include Back Panels of various types, MOLLE cummerbunds, First Spear Tubes™ integrations, and different placards. The LV/119 O V E R T Rear Plate bag was built for those who need a scalable vest to wear in a multitude of environments ranging from Low Visibility to Direct Action. The system possesses additional features that make it more suitable for high profile operations. The rear plate bag features full integration of our Recovery Handle™. The rear bag also features minimal MOLLE webbing and Zippers for future integrations with our Zip-on panels that will be available later this year.

• MOLLE VELCRO CUMERBUND item # RS-SA-L-PC-MV-MC-S2 QTY: 1

The 5-Inch Elastic Cummerbund is a simple and effective solution for Level 2 Breachers who need to carry and have rapid access to additional equipment on their sides while still maintaining a low profile. Side loading is great for ground vehicle and low visibility operations. Elastic cells are 3 inches wide and are built around standard 5.56 Magazines, such as the PMAG. Elastic cummerbunds prevent user fatigue while worn for long durations, as they stretch with the body during active maneuvers.

By using 5-Inch Elastic, we allow for the stable carriage of taller items as they are held more securely. The sewn-on pull tabs allow for the use of the Bungee Retention Kit to securely hold items for HALO, OTB, or other kinetic operations. The tabs also allow users to pull on the cell and make it easier to load and extract equipment.

The Elastic Velcro Cummerbund features premium, Berry Amendment Compliant materials sourced from industry leaders in textiles manufacturing. It offers superior construction processes, including triple stitching on the elastic cells to prolong life and prevent cell failure when stuffed with-non standard or oddly shaped items like energetic breaching charges and initiating systems.

Cummerbund Attachment

The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds, as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for a few reasons.

1. There is no external mounting that can get snagged or rip off when exiting vehicles in haste.

2. The design creates a smooth profile when worn underneath clothing.

3. Velcro is not utilized as an attachment method on the rear plate bag. Velcro wears out over time and is a generally less-than-optimal attachment method when not supported in other ways. Velcro doesn't handle weight well and it sticks to everything, especially cloth seats.

• SIDE ARMOR BAGS item # PC-AB-MC QTY: 1 set

The bags were built with an offset MOLLE configuration, which allows the user to wear the plates as far forward on the cummerbund as possible. Wearing your side armor as far forward allows for side plate to front plate contact, and closes a small gap in protection left over by traditional side armor systems currently on the market.

• SHOULDER COVER-TRIFOLD item # PC-TS-MC QTY: 1 set

The TRI Fold shoulder cover is a simple solution for covering up your LV/119 shoulder straps. Although these are not built with padding in mind, they do offer some comfort for extended wear. The TRI Fold design makes these easy to take on and off. It also makes routing communication wires easy and simple.

• MOLLE BACK PANEL item # PC-MP-MC QTY:1

The MOLLE back panel was designed to give LV/119 O V E R T users the ability to quickly swap out multiple rear bag loadout configurations based on the needs of a mission set. With its semi-rigid MOLLE frame, multiple anchor points, and quick zip installation, the MOLLE Back Panel is just as robust as a permanent sewn-in system while providing a near limitless set of pouch combination options.

The MOLLE Back Panel features six columns of MOLLE, which provides ample real estate for attaching water bladders, wide pouches, or multiple small pouches side-by-side.

End users can now keep one plate carrier for all missions and simply swap out back panels that have been preloaded with specific equipment and MOLLE storage solutions.

Swapping between MOLLE Back Panels takes less than a minute and requires no tools.

This allows operators to store additional back panels in vehicles or ready rooms for rapid deployment when needed.

• ASSAULT BACK PANEL CORE item # PC-AP-MC QTY:1

The Assault Panel Core was designed to be a multi-mission back panel attachment to your LV-119 OVERT Rear Plate Bag. We designed the Panel to fill a spectrum of needs ranging from a light weight Assault Panel, to a more robust Pack Panel. The panel is both expandable and modular and can accommodate a plethora of equipment to meet almost any operational need.

The Assault Panel Core attaches to your LV-119 Rear Plate Bag using a combination of 6 directional snaps, and 2 full length zippers. It also utilizes two stabilizers that route inside of the Rear Plate Bag if the Panel is used in "Configuration 2 or 3" listed below.

The Panel has a removable flap system that allows the user to configure the upper half of the Panel to meet their mission needs. (Flaps are sold separately, the Assault Panel Core does NOT come with a flap.) This eliminates the need to have multiple panels and allows for quicker donning and doffing of mission essential equipment.

The top of the Panel features a custom double pull, separating zipper. This zipper serves three purposes.

1) It allows the Flaps to be completely removed from the Core and swapped out.

2) It allows communication antennas and other items such as cabling, hydration tubes, and breaching tools to be routed into and out of the top of the panel.

3) It provides quick access to the inside of the panel without lifting the entire Flap.

The Assault Panel Core also has three direction snaps to hold Flaps securely on and to keep tools held inside the panel.

The Assault Panel Core features 4 external attachment zippers. These zippers allow the panel to be worn in three configurations.

1) Configuration 1 uses the top zippers to attach the panel to the plate bag. This compresses the panel and allows the panel to be worn in a "light" configuration. This configuration of the panel is great for assaulters who want a streamlined and tight configuration and only need to carry things like a small hydration bladder, slap charges, flash bangs and GP kit on their backs.

2) Configuration 2 uses the bottom zippers to attach the panel to the plate bag. This configuration gives the user much more capacity and configures the panel into more of a backpack. This provides the same features as Configuration 1, but with the added volume for bulky items such as radios, cold weather gear, poll less litters, etc.

3) Configuration 3 also uses the bottom zippers to attach to the rear plate bag, but introduces the bottom expansion as well. This expansion offers the ability to carry longer tools and store even more bulky items in the expanded space.

The Assault Panel Core comes standard with a permanently affixed large GP pocket on the lower half. This pocket is velcro lined for attachment of accessory items. It features a total of two tie down locations inside the pouch for securing sensitive equipment. The front of the pouch features a zippered stash pocket for organizing smaller, commonly needed items. This pocket also has a 4" x 5" Velcro Field for attaching identification patches. Behind the GP pocket is a hidden stash compartment. This is used for storing the lower half of slap charges or breach pens when they are passed through the flaps above. It can also be used to stash E&E equipment or smaller personal items.

Each side of the panel features six tie down loops for securing longer items external to the panel. These loops are great for attaching Tri-Fold or Bi-Fold charges or other tall items.

The bottom expansion has a G-Hook internal to the panel that allows you to secure it in place if a heavier load needs to be carried inside, but you do not want the expansion to deploy inadvertently.

• BACK PANEL GP FLAP item # PC-GF-MC QTY:1

The GP Flap is a single pocket zip on attachment to our Assault Back Panel Core.

It consists of one pocket that measures 10" x 6" x 2.5"

The pocket was built to store extra items that may be needed on an operation such as medical equipment or roll up flex linear charges.

The pocket features a half zippered closure to prevent items from inadvertently dumping out unzipping the pouch.

Inside the pocket there is Velcro loop lined on both sides for the addition of hook Velcro accessories. There are also two tie down locations on the interior for securing sensitive items.

The GP Flap has two built-in channels behind the pocket that allows for the storage of linear items, such as Slap Charges and Breach Pens.

The front of the pocket offers a smaller zippered stash pocket for organizing smaller items and features a loop Velcro field that measures 2" x 9" for attaching placards or velcro patches.

The GP flap is attached to the Assault Back Panel Core by a separating dual zipper, 3 directional snaps and a hook/loop Velcro field.

• BACK PANEL FLASHBANG FLAP item # PC-FF-MC QTY:1

The Flash Bang Flap is a two pocketed zip on attachment the mates to our Assault Back PanelCore.

It consists of two pockets that measure 5" x 4" x 1.5"

The pockets were built to house common Flash Bang sizes available to both LEO's and Military Personnel.

Each pocket has a removable flap (included) and a built-in channel behind the pocket that allows for the storage of linear items, such as Slap Charges and Breach Pens.

Each pocket can accommodate one of our Dividers, which will keep your flash bangs separate and upright even when one is removed from the pocket.

The Flash Bang flap is attached to the Assault Back Panel Core by a separating dual zipper, 3 directional snaps and a hook/loop Velcro field.

• MICRO FIGHT CHASSIS Mk V item # CR-MF-MC-05 QTY:1

The Micro Fight Chassis MkV is a small and lightweight chassis that can be used as either a standalone magazine placard on a plate carrier, or the central hub for a chest rig when other Spiritus Systems components are used. The MkV is a single cell placard-style chassis that is built with all-new materials and manufacturing processes.

The design features MOLLE on the front and sides to accommodate additional magazine pouches. Tourniquets and other equipment can also be stowed outboard with our universal retention kit, and a row of anchor points along the top opening will interface with our magazine bungee retention kit to secure any caliber of weapon.

The main cell of the MkV Chassis is lined with loop Velcro on both sides and will accommodate all of Spiritus Systems’ magazine inserts.

• RIFLE MAGAZINE INSERT item # MI-556-TR QTY:1 https://www.spiritussystems.com/universal-retention-kit/ https://www.spiritussystems.com/bungee-retention-kit/ https://www.spiritussystems.com/rifle-magazine-insert/

The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.

Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines.

This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines.

• BRUNCH BOX POUCH item# PO-BB-MC QTY:1

The Brunch Box pouch is a versatile breaching pouch. It was created with exclusive input from the Direct Action Resource Center (DARC), located in Arkansas. DARC is a premiere tactics and training center with the leading breaching program in the country. Their instructors have ages of practical real world experience in explosive breaching, both the military and law enforcement realms. Spiritus Systems worked closely with DARC and applied this first hand knowledge to create a product specifically for the explosive breaching community. The Brunch Box mates well with the DARC breaching curriculum and theory and is available for use in DARC breaching courses.

Larger than its little brother the S.A.C.K Pouch, The Brunch Box was designed to carry large and bulky items with ease. For breachers the pouch is incredibly versatile, allowing the breacher to carry an array of charges onto the objective in a clean and easy to reach package. It also consolidates charges inside of your explosive safely, so that they can be accessed at a moment's notice and mounted quickly to your plate carrier.

The Brunch Box can accommodate Roll-Ups and multiple Rapidly Deployable Charges.

The front, rear and bottom of the pouch features rows of elastic loops. These loops can be used to secure multiple Interior Door Charges for easy access.

The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured.

The front of the pouch features a zippered stash pocket for stashing and organizing smaller items like det cord remnants or firing device plungers.

The inside features soft loop Velcro on both sides. This makes the Brunch Box very dynamic, giving you the ability to use our Velcro Insert Suite to organize mission essential equipment. It also features two slide-locks that make it easy to adjust the tension https://www.spiritussystems.com/sack-sub-abdominal-carrying-kit/ of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch, if submersion occurs.

The Brunch Box is designed to fit onto the bottom of our Micro Fight Chest Rig or plate carrier or rig that accommodates standard hook and loop, making it a versatile choice for those changing load-outs often. Simply pull this off one kit and add it to another.

Additionally, the Brunch Box comes with a removable 1" waist strap to wear fanny pack style as well.

The bottom of the pouch features two elastic loops that can be adjusted to hold a tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary.

• FANNY SACK POUCH Mk3 item # RS-BE-PO-FS-MC-03 QTY:1 The Sub Abdominal Carrying Kit or "SACK" is the most versatile tactical "fanny pack" on the market. It was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle.

The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured.

The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary.

The inside features soft loop Velcro on both sides. This makes the pouch very dynamic, giving you the ability to use our Velcro Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch, if submersion occurs.

The SACK is designed to fit onto the bottom of our Micro Fight Chest Rig, or any other plate carrier or rig that accommodates standard hook and loop, making it a versatile choice for those changing load-outs often. Simply pull this off one kit and add it to another.

• Multi Mission Single Point Sling item# 215 MMSPSMC QTY:1

Single point sling, uses a Cobra Buckle for quick disconnect and shock cord support.

Includes 550 cord adapter to attach weapon.

• FORG3D STD2 Large-2 pack: QTY:1

These American designed, tested and manufactured products will allow for quick or steady controlled deployment of up to 60′ of Shock Tube. Large STD2 will fit two wide in CRYE armor or carry one in a TacMed™ Phantom® Individual Medical Pouch. The Mini-STD2 fits most 20-25 round AR-10 magazine pouches.

• FORG3D STD2 Small -3 pack: QTY:1

These American designed, tested and manufactured products will allow for quick or steady controlled deployment of up to 60′ of Shock Tube. Small STD2 will fit two wide in CRYE armor or carry one in a TacMed™ Phantom® Individual Medical Pouch. The Mini-STD2 fits most 20-25 round AR-10 magazine pouches.

• Arbor Arms Pouch for Large FORG3D STD2 #STD2PCH-L-MC QTY:1

This pouch is designed to fit the Large FORG3D STD2 and allows for it to be attached to Velcro panels on plate carriers.

• Arbor Arms Pouch for Small FORG3D STD2 # STD2PCH-S-MC QTY:1

This pouch is designed to fit the Small FORG3D STD2 and allows for it to be attached to Velcro panels on plate carriers.

• Arbor Arms ABDOMINAL OFFSET PANEL # ABDOFF-MC QTY:1

The Abdominal Offset Panel allows the user to attach our STD2 pouches via the loop velcro panel or via the horizontal MOLLE slots on the front. The Abdominal Offset Panel has vertical MOLLE slots on the back that can be used to attach retainer bands to attach charges or for direct MOLLE pouch attachment.

• Rite in Rain Field Planner Starter Kit item# 9250M: QTY:1

Overall Size:7 3/8" x 8 5/8" x 1 7/8", multicam, cordura fabric, ring binder. NSN:7530-01- 631-2666

• Blaster Tool/Supply Center Punch Retracting Tether with Velcro Strap Mount #

48702-CPRT: QTY:1

Nylon Coated Stainless Steel Cable, Stainless Steel Spring and Hardware, 60 lbs. Breaking Strength.

• Winchester Shotgun Primers (Box of 100) item# 105-202-778WB: QTY:1

Winchester 209 Shotgun Shell Primers are non-corrosive and non-mercuric #209.

• Waterproof Shotgun Primer Container item# FE333-TAN: QTY:2

Durable plastic construction, weatherproof container with clear see-through window.

Provides an easy solution for storing and carrying shotgun primers. Whether inside the breacher's priming kit or on the body, the Shotgun Primer Container is perfect for keeping your #209 primers in one centralized location.

• Duck Brand 240200 Double-Sided Duct Tape, 1.4"X12 YDS B002O16SHW: QTY:1

The tape has great adhesive strength, it is also very affordable. Works well for direct charge to target adhesion in dry, warm environments. We also use it extensively to hold multiple strands of Detonating Cord in place during the charge construction process. This tape has a thin plastic backing that prevents tearing upon removal.

• Gorilla Duct Tape, 1 In x 30 ft, 17 mil, Black #16V093: QTY: 2

Incredibly strong GORILLA Tape-To-Go is a double-thick adhesive that grips smooth, rough, and uneven surfaces. Reinforced backing. Grips to most surfaces.

• Nashua Duct Tape 2280/ Cloth, Olive, Utility Grade, Polyethylene, Rubber, 1 7/8 in 60yd item # 1198641: QTY:3

Nashua 2280 multi-purpose duct tape is 9 mils thick and available in OD GReen. This polyethylene-coated cloth tape offers an exceptional balance of adhesion, strength, ease of use, and VALUE.

• Electric Tape 10 pack item# 15120: QTY:1

60' Vinyl Electrical/ Insulating tape- (7mil x ¾"x60') Professional grade. Suitable for use not more than 600v and not more than 800 F.

• Hydrogel Tape 2" x 50' item# 15565: QTY:1

As a superior and extremely versatile adhesive, hydrogel has been is use with the US Special Operations breaching community for years. Over this time it has proven to be one of the most reliableand operationally friendly adhesives on the market. Hydrogel adhesive is prepared from a precursor containing acrylic acid and an alcoholamine. It is an effective adhesive under both wet and dry conditions and has a long shelf life. Size: W- 2" x L- 50'

• Breaching Tape (60Mil) 2"x 50' item# 15560: QTY:2

An All-Temperature adhesive tape. The specially designed adhesive is extremely aggressive and will maintain tackiness down to -10*F. It will also adhere directly to many wet surfaces and in some conditions completely under water.

• Large Rubber Strip -2" wide x 78" long item# 15577: QTY:3

These Rubber Strips are made from highest quality, brand new, US made Conveyer belt rubber. The strips have been cut to convenient and frequently used sizes. Strip Size - L78" x W 2"

• 3/4" wide polyethylene breaching strip - 10 pack item# 48702-PBS: QTY:1 pack

These polyethylene EIDC Strips (1/2" x 3/4" x 12") are produced by FETT in Las Vegas.

Made from high density polyethylene and cut down to the most common size used by Law Enforcement Explosive Breachers. Sold in Bundles of 10

• Small Rubber Strips 3/4" x 12" - 10 pack item# 15570: QTY:1 pack

These EIDC Rubber Strips are made from the highest quality, brand new, US made Conveyer belt rubber. The strips have been cut to convenient and frequently used sizes.

Strip Size - L12" x W3/4" (10 Per Bundle)

• FETT Sleeved Breaching Bladder -15 pack item# 48702-SBB: QTY:1 pack

Bladders are exact fit for a 2” wide 330b rubber strip, the FE325 Sleeved Breaching Bladder provides the following; Up to 75% percent reduction in Net Explosive Weight (N.E.W) required for breaching various targets. Significant reduction in high levels of hazardous blast pressure released into the ambient environment due to the properties of water tamping. The combination of reduced N.E.W and reduced levels of blast pressure assures minimization of collateral damage in confined/ enclosed spaces. The soft construction of the Sleeved Breaching Bladder™ coupled with the use of water as the tamping medium results in low to no hazard debris projecting back in the breacher’s direction and/ or into the surrounding environment.

• Breaching Bladder 6" w x 30 " L - 10 pack item# 48702-BB: QTY:1 pack

Made of highly durable rubber similar to those used for hydration reservoir. Withstand abusive handling without punctures or leaks. (Bag Dimensions: 30" Length / 6" Width).

Rugged design, light weight, and compressibility make the Breaching Bladder an ideal choice for storage inside operational breaching bags, cargo pockets, tactical vests, and vehicles with limited space. At full capacity the Breaching Bladder holds 3250 ml of liquid,

3.25 times the amount found in a standard 1000 ml IV bag. Extra-large design provides breachers with full flexibility when choosing the amount of liquid and the size/ shape of bag best suited for their specific charge construction and purpose. Provides a larger tamping surface area than standard IV bags. Fill valve is 1" in diameter for easy filling from any spout, faucet or hose. This makes filling the bladder in the field, quick and efficient. The corner location of the fill valve allows for the bag to be completely filled with water eliminating large air pockets that are commonly found with standard medical IV Bags. Valve plugs are permanently attached to the valve when open to avoid loss of plugs in low -light or no light conditions or as a result of storage conditions

• Det Cord Connector - (50pk) item# 6304: QTY:1 pack

Det. Cord Connectors utilized for connecting 50 and 25 Grain Det. Cord

• Replacement Blade for BTS/Fuse Cutter item# 14888BTS: QTY:1

Replacement Blade for the BTS / Tube and Fuse Cutter. Designed to cut shock tube, det cord and fuse.

• Sharpie Black 4 Pack Model item# B00L3Y27N0: QTY:1 pack

Containing high-contrast ink that resists fading from exposure to UV, rain, snow and mud, Sharpie Extreme markers are designed for use in high-impact, demanding environments.

Use them on outdoors equipment, sports gear and other items that spend time outdoors.

• 8” Zip ties item# GTM-200STC: QTY: 1 pack (100 count)

A cable fastening device provides strong support for positioning cable and pipe bundles.

The design of its head guarantees a high tensile strength while allowing a very low insertion force.

• FireAde 2000 Fire Suppression Units - 2 Pack item# 53PW75: QTY:1 pack

Use to extinguish Class A and Class B fires. FireAde 2000 firefighting agent is biodegradable, environmentally safe and easy to use. Quickly extinguishes fires involving wood, paper, cloth, oil, gasoline, flammable liquids and grease. Contains no CFC's. Made in the USA. Dimensions: 2-5/8" Dia. x 9-3/4" Tall

• Down Range Systems AWiDD Kit – 1 Kit Item #DRS19001 : QTY: 1

DRS Affordable Wireless Detonation Device (AWiDD) Kit contains one (1) master controller and ten (10) wireless receivers. This remote wireless initiation system is the most current, safe and simple wireless detonation device currently on the market. AWiDD kit will allow breachers to initiate explosive charges from a greater distance reducing the risks of overpressure and fragmentation associated with traditional shock tube detonation systems. They enable personnel to maintain a safe distance during energetic breaching, improving overall safety standards.

Item /Description (Supply) Qty Per Kit Vender Part #

CBP

Unit Price

CBP Ext.

Price

ASSAULT 45- CROCODILE 1 ARC'TERYX 17725 $408.3

9 $408.39

3" LARGE OPEN WINDO POUCH

COYOTE TAN 1 LBX LBX-1024 CT $25.86 $25.86

MEDIUM WINDOW POUCH-

COYOTE TAN 2 LBX LBX-1016 CT $22.98 $45.96

PADDED SIDE POUCH COYOTE

TAN 2 LBX LBX-1021 CT $35.44 $70.88

LARGE MESH POUCH- COYOTE

TAN 2 LBX LBX-0026 CT $19.64 $39.28

LV-119 FRONT OVERT PLATE BAG 1 SPIRITUS SYSTEMS PC-FO-MC-

LG

$120.6 9 $120.69

LV-119 REAR OVERT PLATE BAG

1 SPIRITUS SYSTEMS

PCRS-SA-PC-

RO-MC-LG

(SA-L)

$126.4

4 $126.44

MOLLE VELCRO CUMERBUND 1 SPIRITUS SYSTEMS RS-SA-L-PC-

MV-MC-S2 $74.95 $74.95

SIDE ARMOR BAGS 1 SPIRITUS SYSTEMS PC-AB-MC $78.14 $78.14

SHOULDER COVER-TRIFOLD 1 SPIRITUS SYSTEMS PC-TS-MC $22.94 $22.94

MOLLE BACK PANEL 1 SPIRITUS SYSTEMS PC-MP-MC $80.44 $80.44

ASSAULT BACK PANEL CORE 1 SPIRITUS SYSTEMS PC-AP-MC $218.4

4 $218.44

BACK PANEL GP FLAP 1 SPIRITUS SYSTEMS PC-GF-MC $101.1

4 $101.14

BACK PANEL FLASHBANG FLAP

1 SPIRITUS SYSTEMS PC-FF-MC

$98.84 $98.84

MICRO FIGHT CHASSIS Mk V 1 SPIRITUS SYSTEMS CR-MF-MC- 05 $52.84 $52.84

RIFLE MAGAZINE INSERT 1 SPIRITUS SYSTEMS MI-556-TR $28.69 $28.69

BRUNCH BOX 1 SPIRITUS SYSTEMS PO-BB-MC $99.95 $99.95

FANNY SACK POUCH Mk3 1 SPIRITUS SYSTEMS RS-BE-PO-

FS-MC-03 $74.69 $74.69

Multi Mission Single Point Sling 1 215 Gear 215

MMSPSMC $49.99 $49.99

FORG3D STD2 Large -2 pack 1 FORGE3D " Five Four Fidelis" STD2- LARGE $82.80 $82.80

FORG3D STD2 Small -3 pack 1 FORGE3D " Five Four Fidelis"

STD-2

SMALL $65.55 $65.55

Pouch for Large FORG3D STD2 1 Arbor Arms STD2PCH-L-

MC

$140.3 0 $140.30

Pouch for Small FORG3D STD2 1 Arbor Arms STD2PCH-S-

MC

$127.6 5 $127.65

ABDOMINAL OFFSET PANEL 1 Arbor Arms ABDOFF-MC $86.25 $86.25 Rite in Rain Field Planner Starter Kt 1 Rite in Rain 9250M $64.53 $64.53 Center Punch Retracting Tether with Velcro Strap Mount 1 Blaster Tool / Supply 48702-CPRT $32.44 $32.44 Winchester Shotgun Primers (Box of 100) 1 Brownells 105-202-

778WB $50.11 $50.11

Waterproof Shotgun Primer Container 2 Global Assets

Integrated FE333-TAN $25.00 $50.00 Duck Brand 240200 Double-Sided Duct Tape, 1.4"X12 YDS 1 Amazon B002O16SH

W $12.59 $12.59 Gorilla Duct Tape, 1 In x 30 ft, 17 mil, Black 16V093 2 GRAINGER 16V093 $5.37 $10.74 Nashua Duct Tape # 504K491 2280/ Cloth, Olive, Utility Grade, Polyethylene, Rubber, 1 7/8 in 60yd

3 Home Depot 1198641 $11.76 $35.28

Vinyl Electrical Tape, 3/4" x 60' / Black 1 Blaster Tool / Supply 15120 $1.32 $1.32

Hydrogel Tape 2" x 50' 1 Blaster Tool / Supply 15565 $133.7 7 $133.77

Breaching Tape (60Mil) 2"x 50' 2 Blaster Tool / Supply 15560 $104.6 3 $209.26

Large Rubber Strip -2" wide x 78" long 3 Blaster Tool / Supply 15577 $41.57 $124.71 3/4" wide polyethylene breaching strip - 10 pack 1 Blaster Tool / Supply 48702-PBS $26.54 $26.54 Small Rubber Strips 3/4" x 12" - 1 PACK 10 Blaster Tool / Supply 15570 $5.75 $57.50 FETT Sleeved Breaching Bladder - 15 pack 1 Blaster Tool / Supply 48702-SBB $256.1

9 $256.19 Breaching Bladder 6" w x 30 " L - 10 pack 1 Blaster Tool / Supply 48702-BB $117.5

6 $117.56

Det Cord Connector - (50pk) 1 Ideal Blasting 6304 $39.33 $39.33 Replacement Blade for BTS/Fuse Cutter 1 Blaster Tool / Supply 14888BTS $3.45 $3.45

Sharpie Black 4 Pack Model 1 Amazon B00L3Y27N0 $7.71 $7.71 8" Zip Ties- Natural *100 pack 1 Home Depot GTM-200STC $14.70 $14.99 FireAde 2000 Fire Suppression Units - 1 16 oz can 2 Grainger 53PW75 $28.89 $57.78

Down Range Systems AWiDD Kit 1 Down Range Systems DRS19001 $3,289.

$3,289.9

TOTAL PER KIT

$6,916.8

TOTAL KITS 10 TOTAL COST $69,168.10

“ATTACHMENT B”

BORTAC Level 2 Energetic Breacher Roll-Out Kit Equipment List

• Neodymium Magnets BDS TacMag Multicam item # BDS TACMAG QTY:2

The Tactical Magnetic Retention System (TacMag) is molle compatible with gear. It attaches in seconds and has a 60 lb + pull weight which is ideal for securing gear while placing energetic charges. This device is great for clasping evidence, load bearing weapons, other gear, etc. Ideal for not only tacitcal use but various other uses while being worn on a belt or mounted for use to hold things in place while hanging energetic charges. Many users have attached to their cummerbunds for a retention point for their breach shot gun to adhere to.

• TI-30xa Scientific Calculator: Item: B00000JBNS QTY:1

Basic, battery-operated scientific calculator with one-line display and general math and science functionality.

• Single Center Punch Shock-Tube Initiator (CPI) Kit #FE101-S: QTY:2

Single initiator, very simple, reliable and safe to use. Simply attach collet to body of device and insert shock tube into collet. To fire, insert center punch into body and depress. As long as the center punch is out of body, the device is safe.

• Dual Center Punch Initiator #FE102: QTY:1

This firing device is the most cost effective, safe and simple dual device currently on the market. It operates in the same manner as the very popular single center punch device. The device cannot be fired until the dual center punches are inserted into the main body and firmly struck. Comes with a lanyard connecting the center punch to the device body

• BTS Dual Cap Crimper & Fuse Cutter Kit w/ Molle Pouch item# 14885BTS: QTY:1

Dual Crimper:

The New BTS Dual Cap Crimper is a high quality non-magnetic, non-sparking tool that offers a dual crimp in one stroke. Manufactured from high-strength aircraft aluminum, the crimper has a hard-anodized finish. Its strong, smooth surface has durable edges for continuous crimping. The Dual Cap Crimper has a Powder Punch and Fuse Cutter for clean, precise cuts of detonation cords.

It is the dual cap crimper approved and used by both the United States and Canadian militaries. With its perfect record to date, the Dual Cap Crimper surpasses all expectations for quality and reliability, and comes with a limited lifetime warranty against breakage, attesting to its strength and excellence in craftsmanship.

Fuse & Tube Cutter:

The NEW BTS Tube and Fuse Cutter is specially designed for precision, accuracy, ease of use and efficiency. With its razor sharp blade, this spring loaded Cutter is ideal for all cutting applications including NONEL tube, and fuse and detonation cord from 1/16 inches to 3/16 inches diameter. The cutting base also provides an exit for powders to be released as the fuse or cord is being cut. Manufactured from the same high strength aircraft quality aluminum as the BTS Dual Cap Crimper, the Tube/Fuse Cutter comes with a replaceable Blade and improved locking mechanism.

• Zircon Stud Sensor HD55 Stud Finder #65945 QTY:1

This Center Sensor Stud Finder has a detection depth of 1-1/2 in. for wood and metal. Traditional stud sensors locate the edge of the stud, but our new product locates the center for a more efficient read, even when held at an angle. Plus, it is constantly calibrating to save time during use. An audible alert and directional LED arrows clearly notify you once the stud is located and you can easily mark the center of the stud with the center marking channel.

• Milwaukee FASTBACK Flip Utility Knife w/ Storage # 48-22-1903 QTY:2

The Retractable Utility Knife offers quick blade change with the press of a button.

Blade storage provides easy access to new blades without having to walk back to your tool box. The multi-material handle allows for a comfortable, sturdy grip.

• Milwaukee 25' Compact Tape Measure # 48-22-6625 QTY:2

The Milwaukee 25’ Tape Measure blade is reinforced coating for maximum durability. This tape has up to an 8 ft. standout. To simplify framing jobs, the bright yellow, easy-to-read blade has 16 in. and 19.2 in. stud center markings.

• Milwaukee 6 inch Folding Jab Saw Item # 48-22-0305 QTY:1

The Folding Jab Saw provides comfort and control with its non-slip grip on the handle. The hardened and tempered blade stays sharp for a long time while the blade cuts on both push and pull strokes. The triple ground teeth cut 50% faster than traditional designs making it possible for jobs to be completed quickly.

• Husky 6-in-1 Multi-Function Pliers Item # B01E5BYR8U QTY:1

The Husky 6-in-1, 8.5" long nose multifunctional plier cuts, strips and crimps. Made of polished chrome vanadium, drop forged and heat treated for exceptional strength & durability. The 6 functions include: Gripping and Looping, Screw Extractor, Stripping (10-18 AWG Solid 12-20 AWG stranded), Wire Cutting (2.0mm), Screw Shearing (6-32 & 8-32), and Crimping. It features a comfortable thermoplastic rubber grip & handle.

• Milwaukee 10-1 Ratcheting Driver Item # 48-22-2301 QTY:1

Milwaukee Multi-Bit Screwdrivers help make your job a little easier. The 10-in-1 Ratcheting Screwdriver’s durable ratcheting mechanism allows for faster and easier all-day driving. With the on-board storage of 10 common bits and a 1/4-Inch nut driver, this is your new everyday screwdriver. This screwdriver features industrial-strength bits as well as Cushion-Grip handles with spin caps for outstanding comfort and control.

• CGS Pandora Firing Device QTY:1

While remaining incredibly safe, the CGS PANDORA™ double-action only, striker fired method of operation is effortless to use and requires very little end user training.

To use – very simply slide the trigger block safety switch to the fire position from either side of the device and pull the trigger rearward when ready to fire.

The CGS PANDORA™ strikers remain constantly, positively, and mechanically locked into a safe position before and after firing.

The dual independent striker block safeties ensure that the strikers remain held away from the primers of the direct fire system to ensure safety at all times up until the moment the device is intentionally fired.

The patent-pending CGS PANDORA™ firing mechanism achieves true dual independent striker, sear, and safety operation using two firing channels physically separated by the trigger assembly.

CGS PANDORA™ is simple to assemble and disassemble, easy to clean, and is user serviceable in the field should any maintenance be required.

The CGS PANDORA™ fits perfectly in any common M16 Magazine pouch.

Item /Description (Equipment) Qty Per Kit Vender Part # CBP Unit

Price CBP Ext.

Price

Neodymium Magnets BDS TacMag Multicam 2 Blaze Defense

Systems

BDS

TACMAG $74.76 $149.52

TI-30xa Scientific Calculator 1 Amazon B00000JBNS $13.26 $13.26

Single Center Punch Shock-Tube Initiator (CPI) Kit 2 Global Assets

Integrated

FE101-S

$148.00 $296.00

Dual Center Punch Initiator 1 Global Assets

Integrated

FE102

$252.00 $252.00 BTS Dual Cap Crimper & Fuse Cutter Kit w/ Molle Pouch 1 Blaster Tool /

Supply 14885BTS $297.96 $297.96 TRI-FOLD TUBE & FUSE CUTTER 1 Blaster Tool /

Supply 14890 $37.00 $37.00 Zircon StudSensor HD55 Stud Finder 1 Home Depot 65945 $29.45 $29.45 Milwaukee FASTBACK Flip Utility Knife w/ Storage 2 Milwaukee 48-22-1903 $15.89 $31.78 Milwaukee 25' Compact Tape Measure 2 Milwaukee 48-22-6625 $18.43 $36.86 Milwaukee 6 inch Folding Jab Saw 1 Milwaukee 48-22-0305 $21.02 $21.02 Husky 6-in-1 Multi-Function Pliers 1 Amazon B01E5BYR8

U $35.38 $35.38 Milwaukee 10-1 Ratcheting driver 1 Milwaukee 48-22-2301 $22.18 $22.18 Pandora Firing device 1 CGS $1098.90 $1098.90

TOTAL PER KIT $2,321.31

TOTAL KITS 10 TOTAL COST $23,213.10