0106-B302 SAM-BETA Pre Solicit Temp.docx

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 332722 for, Bolts, Nuts, Screws, and Rivets. This requirement will be set aside as a 100% Small Business concern.

The requirement is being solicited as Control Industrial Material (CIM), which requires written verification that the chemical and mechanical properties have been determined and are acceptable, IAW military specification MIL-DTL-1222, as it applies to the below document numbers:

The Contract Line Items (CLINs) are as follows.

0106-B302 SCREW (40 Each) (CIM ITEM)

FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 3/4-10UNC-2A X 2-1/8" LONG FF-S-86E AMEND-4 TY-IV, NICKEL COPPER ALLOY, QQ-N-281D AMEND-2, CL-A, UNS-N04400; SLF LKG IAW MIL-DTL-18240F AMEND-1 TYPE "N"; MARKINGS OF A MINIMUM 6 DOTS( APPROX. 0.032) RAISED OR DEPRESSED ( APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY); FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 3/4-10UNC-2A X 2-1/8" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 2A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B303 SCREW (8) Each (CIM ITEM)

FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 5/8-11UNC-2A X 1-7/8" LONG, FF-S-86E AMEND-4 TY-IV, NICKEL COPPER ALLOY, QQ-N-281D AMEND-2, CL-A, UNS-N04400; SLF LKG IAW MIL-DTL-18240F AMEND-1 TYPE "N"; QA 2/CIM;

MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010), SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY); FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-2A X 1-7/8" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 2A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B304 WASHER (10) Each

0.125 TK X 1-1/2 OD X 21/32 ID; DUPONT ZYTEL NO. 101 OR EQUAL

NOTE: FOR FREE FLOOD COVER, FR 30-31S

0106-B305 SCREW (7) Each (CIM ITEM)

SPECIAL HEX SOCKET COUNTERSUNK CAPSCREW, 5/8-11UNC-3A X 2-1/2 IN LG; FF-S-86E, AMEND-4,TY-IV & DETAIL 4-2C ; NICUAL, QQ-N-286G, ANN & AGE HARDENED; SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE-N ; QA 2/CIM

FF-S-86E

ORDERING DATA:

A) SCREW, CAP, COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-3A X 2-1/2 IN LG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B315 SCREW (26) Each (CIM ITEM)

FLAT HEAD SELF LOCKING CAPSCREW, 1/2-13UNC-3A X 1-1/2 " LONG, FF-S-86E AMEND-4, TY IV, NICU, QQ-N-281D AMEND-2, CL A, SLF LKG ELEMENTS IAW MIL-DTL-18240F AMEND-1 (CIM MATERIAL) NOTE: FOR DIHEDRALS, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 1/2-13UNC-3A X 1-1/2" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B316 SCREW (17) Each (CIM ITEM)

SOCKET HEAD CAP SCREW, HEX SOCKET, 82 DEGREE FLAT COUNTERSUNK HEAD,

5/8-11UNC-3A X 3" LONG, FF-S-86E, TY-IV, NICU 400, CLASS-A, QQ-N-281 CIM

NOTE: FOR PORT TORP TUBE RECESS COVER. FF-S-86E

ORDERING DATA:

A) SCREW, CAP, SOCKET HEAD HEX; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-3A X 3" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

0106-B317 SCREW (14) Each CIM ITEM)

SPECIAL FLAT SOCKET HEAD CAPSCREW, 5/8-11UNC-3A X 2-1/2" LG, MANUFACTURE PER DETAIL 4-2C1 OF DWG 100-5858019; SELF LOCKING PER MIL-F-18240 TYPE N, NICUAL, QQ-N-286G, ANNEALED. (CIM) FOR VLS COVERS FR 14/15

FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002 B) TYPE MANUFACTURE PER DETAIL 4-2C1 OF DWG 100-5858019; 5/8-11UNC-3A X 2-1/2" LG C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B325 SCREW (18) Each (CIM ITEM)

HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW, 5/8-11UNC-3A X 2-5/8 IN LG, FF-S-86E AMEND-4, TY-IV; NICU, QQ-N-281D AMEND-2; SELF LOCKING IAW MIL-DTL-18240F AMEND-1, ANY TYPE. CIM, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-3A X 2-5/8 IN LG

D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE ANY

D: N/A

E: AS REQUIRED

0106-B327 SCREW (42) Each (CIM ITEM)

FLAT SOCKET HEAD CAPSCREW, 1/2-13UNC-3A X 1- 9/16" LONG, FF-S-86E AMEND-4, TYPE IV; NICU, QQ-N-281D AMEND-2, SELF LOCKING IN IAW MIL DTL 18240F CONFIGURATION "B" STRIP OR PATCH. SLF LKG TYPE L OR P; (CIM MATERIAL)

FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 1/2-13UNC-3A X 1- 9/16" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B328 SCREW (18) Each (CIM ITEM)

HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW, 1/2-13UNC-3A X 2.00 IN LG, FF-S-86E AMEND-4, TY 4; NICU, QQ-N-281D AMEND-2, CIM. SELF LOCKING ELEMENT IAW MIL DTL 18240F CONFIGURATION "B" STRIP OR PATCH TYPE (GENERAL NOTE 20 OF DWG. 5900966). FOR UPPER RUDDER COVER, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE 4; 1/2-13UNC-3A X 2.00 IN LG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B329 SCREW 29 (Each) (CIM ITEM)

SKT HD CAP SCR, FLAT HD, QQ-N-286 CL-A, 1/2-13UNC-3A, 1-3/8 LG; MIL-S-1222 GR 500 NICUAL, FF-S-86E, TY IV, SLF LKG MIL-DTL-18240F CONFIGURATION B, TYPE L OR P. NOTE: FOR STBD HORIZONTAL STABILIZER CVRS; CIM MATL, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 1/2-13UNC-3A, 1-3/8 LG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B330 SCREW (14) Each (CIM ITEM)

SPECIAL HEX SOCKET COUNTERSUNK CAPSCREW, 5/8-11UNC-3A X 2-1/2 IN LG; MANUFACTURED AS SHOWN ON DETAIL 4-2C OF DWG. 5858019; NICUAL, QQ-N-286G, ANN & AGE HARDENED; SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE-N; QA 2/CIM, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002 B) TYPE MANUFACTURED AS SHOWN ON DETAIL 4-2C OF DWG. 5858019; 5/8-11UNC-3A X 2-1/2 IN LG C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B405 SCREW (70) Each (CIM ITEM)

SOCKET HEAD; HEX SOCKET; FLAT COUNTERSUNK HEAD; SELF LOCKING; TYPE "N" MIL DTL-18240F, 1/2-13UNC-2A X 1.500" LONG; FF-S-86; TYPE IV, QQ-N-286, MS18116, (CIM), FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 1/2-13UNC-2A X 1.500"

C) N/A D) N/A E) N/A F) N/A

G) UNC; 2A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106B406 THREAD SAVER (3) Each

ROD PLASTIC, TEFLON .625 - 11UNC-2B X 1" INCH LONG FULLY THREADED. PC. 57 OF DWG. 6987223 SHOWS .875 DIA ROD, ASTM D1710, TY. 1, GR. 1. DETAIL 117-G PROVIDES DETAILS FOR ITEM 57. SLOTTED, FLAT. FOR THREADED HOLES ON PORT WSQ-9 DAVIT COVER.

0106B407 SCREW (75) Each (CIM ITEM)

SOCKET HEAD; HEX SOCKET; FLAT COUNTERSUNK HEAD; SELF LOCKING; TYPE "N" MIL DTL-18240F, 1/2-13UNC-2A X 1.500" LONG; FF-S-86; TYPE IV, QQ-N-286, MS18116, (CIM), FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 1/2-13UNC-2A X 1.500" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 2A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE N

D: N/A

E: AS REQUIRED

0106-B408 THREAD SAVER (3) Each

ROD PLASTIC, TEFLON .625 - 11UNC-2B X 1" INCH LONG FULLY THREADED. PC. 57 OF DWG. 6987223 SHOWS .875 DIA ROD, ASTM D1710, TY. 1, GR. 1. DETAIL 117-G PROVIDES DETAILS FOR ITEM 57. SLOTTED, FLAT.

0106-B409 SCREW (55) Each (CIM ITEM)

HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW, 5/8-11UNRC-3A X 2-3/4 IN LONG; FF-S-86E AMEND-4, TYPE IV; NICUAL QQ-N-286, FORM-2, CD/HF, ANN & AH; CIM; SLF LKG IAW MIL-DTL-18240F AMEND-1, ANY TYPE, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNRC-3A X 2-3/4 IN LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B410 SCREW (55) Each (CIM ITEM)

HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW, 5/8-11UNRC-3A X 2-3/4 IN LONG; FF-S-86E AMEND-4, TYPE IV; NICUAL QQ-N-286, FORM-2, CD/HF, ANN & AH; SLF LKG IAW MIL-DTL-18240F AMEND-1, ANY TYPE; CIM, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPEIV; 5/8-11UNRC-3A X 2-3/4 IN LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B411 SCREW (23) Each (CIM ITEM)

SPECIAL HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW , 5/8-11UNC-3A X 3-1/2 IN LG(MOD), FF-S-86E AMEND-4, TY-IV & ENCL-001; NICUAL QQ-N-286G, FORM-2, CD/HF, ANN & AH; SELF LKG IAW MIL-DTL-18240F AMEND-1 TYPE "L" OR "P"; PER DETAIL 5-6A1 OF DWG 100-5858188, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-3A X 3-1/2 IN LG PER DETAIL 5-6A1 OF DWG 100-5858188

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B412 CAP SCREW (6) Each (CIM ITEM)

SPECIAL HEX SOCKET FLAT COUNTERSUNK HEAD CAPSCREW, 5/8-11UNC-3A X 2-5/8" LONG; FF-S-86E AMEND-1, TY-IV NICKEL COPPER ALUMINUM ALLOY QQ-N-286G FORM-2, CD/HF, ANNEALED & AGE HARDENED; UNS-N05500; SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE "L" OR "P"; DETAIL 5-6A OF DWG 100-5858188 MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.32) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY), FF-S-86E

ORDERING DATA:

A) SCREW, CAP, FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE IV; 5/8-11UNC-3A X 2-5/8" LONG DETAIL 5-6A OF DWG 100-5858188

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B413 CAP SCREW (26) Each (CIM ITEM)

SOCKET HEAD CAP SCREW, HEX SOCKET, 82 DEG FLAT COUNTERSUNK HEAD, SELF-LOCKING (SEE NOTE 8 OF DWG ) SELF LKG PER MIL-DTL-18240F, AMEND 1, TYPE "L" OR "P", FF-S-86E, TY-4, SIZE: 3/4-10UNC-3A X 2-1/8" LONG, MATERIAL: NICU, CL-A, IAW QQ-N-281D (CIM), FOR AFT BSY-1 RECESS 137/138, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, 82 DEG FLAT COUNTERSUNK SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE 4; 3/4-10UNC-3A X 2-1/8" LONG

C) N/A D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B414 SCREW (16) Each (CIM ITEM)

SELF LKG, 3/4"-10UNC-3A X 1-7/8 IN LG, QQ-N-281D, AMEND 2, CLASS A, FF-S-86F, AMEND 4 TY IV, SELF LKG PER MIL-DTL-18240F, AMEND 1, TYPE "L" OR "P" CIM

SEE NOTE 8 OF DWG FOR BQN-13 FR 127-128, FF-S-86E

ORDERING DATA:

A) SCREW, CAP, SOCKET HEAD; FF-S-86E; 29 MAY 1987; NOTICE OF REACTIVATION 22 FEBRUARY 2002

B) TYPE 4; 3/4"-10UNC-3A X 1-7/8 IN LG

D) N/A E) N/A F) N/A

G) UNC; 3A

MIL-DTL-18240F

A: FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250DEG F MAXIMUM, MIL-DTL-18240F, 2 JUNE 1997 B: N/A

C: TYPE L OR P

D: N/A

E: AS REQUIRED

0106-B415 WASHER (275) Each

WASHER, FLAT

SIZE: 9/16" INCH ID X 1-1/4" INCH OD X 1/8" INCH THK, MATL CRES 316 STAINLESS STEEL, FF-W-92

ORDERING DATA:

A) FEDERAL SPECIFICATION, WASHER, FLAT (PLAIN); FF-W-92B; MAY 9, 1974

B) TY A, GRADE 1, CLASS B

C) N/A

D) 9/16" INCH ID X 1-1/4" INCH OD X 1/8" INCH THK

E) N/A F) N/A

0106-B416 STUD WELD (260) Each

STUD, WELDING, SIZE:1/2"-13-UNC-2A X 1-3/4" LONG BEFORE WELDING WITH ARC SHIELD MATL: SAE-AMS- QQ-S-763C CRES, CLASS-300 SERIES; (CIM) MIL-S-24149/3D. TYPE V CLASS 1, MIL-S-24149

ORDERING DATA:

A) STUDS, ARC WELDING, AND ARC SHIELDS (FERRULES): GENERAL SPECIFICATIONS; 21 JUNE 1965 B) MILITARY SPECIFICATION SHEET, STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY ARC WELDING; 10 JUNE 1988 C) MIL-S-24149/3, TYPE V, CL 1 ; 1/2"-13-UNC-2A X 1-3/4" LONG BEFORE WELDING WITH ARC SHIELD

D) HEAT RESISTANT CERAMIC

E) STUDS SHALL BE CARBON (0.23), MANGANESE (0.90), PHOSPHORUS (0.040), SULPHUR (0.050), AND IRON (REMAINDER)

F) 50,000 PSI MINIMUM

G) THE RIGHT IS RESERVED BY EACH CONSIGNEE TO REJECT STUDS AND ARC SHIELDS (FERRULES) WHICH ARE FOUND DEFECTIVE OR NOT IN COMPLIANCE WITH THIS SPECIFICATION OR THE APPLICABLE DETAIL SPECIFICATION WITHIN 12 MONTHS AFTER DELIVERY.

H) N/A

I) 260 EACH

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM120Q92 and it is expected to be posted on or about 24 June 2020 and posted in BETA SAM, https://beta.sam.gov/. Quotes will be due by 7:00 am EST on 29 June 2020 and may be emailed to the attention of Ricky Smith at ricky.smith@dla.mil. Please make sure that the solicitation number SPMYM120Q0092 is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://beta.sam.gov/ By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.