BIPOD, MACHINE GUN - SPE7L719RX001
This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. No solicitation exists at this time. The purpose of this notice is to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to the Contract Specialist via email. DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for project number CL18396005, PR 1000071915, NSN 1005-01-521-7962 listed in the attached market survey. This acquisition is for supplies for which the Government does possess complete and unrestrictive technical data, therefore the Government intends to solicit and contract with Full and Open Competition under the authority FAR 6.102. The drawings for NSN 1005-01-521-7962 are listed below. NSN 1005-01-521-7962 requires Contractor First Article Testing. There is one waived sources. Waived Source(s): CAGE 06MA8 This item contains a phosphate coating requirement. The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the Nadcap standard for the Phosphate chemical processes. Verification of this certification may be required and must be supplied upon request of the Contracting Officer. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS. This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. Approved Drawings: IAW BASIC DRAWING NR 19200 13022945 REVISION NR DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002191 REVISION NR C DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002192 REVISION NR D DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002195 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002196 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002200 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002203 REVISION NR D DTD 07/24/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002204 REVISION NR D DTD 01/11/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002205 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002207 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE UNK QPL-3150-34 NOT 1 REVISION NR 34 DTD 03/15/2007 PART PIECE NUMBER: IAW REFERENCE UNK QPL-16173-84 NOT 1 REVISION NR 84 DTD 10/29/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12993884 REVISION NR J DTD 01/07/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002197 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002198 REVISION NR E DTD 01/12/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002199 REVISION NR D DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002201 REVISION NR D DTD 01/12/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002202 REVISION NR C DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002206 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12479550 REVISION NR C DTD 05/17/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 98489 80809 REVISION NR DTD 01/24/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 04/26/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13019970 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 09/29/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 07/31/2008 PART PIECE NUMBER:.
SPE7L719RX001 Defense Logistics Agency Land and Maritime
6/4/19, 2:50 PM Bipod Machine Gun - Project CL18396005
The requirement for NSN 1005-01-521-7962 will be procured under an Indefinite Delivery Contract (IDC) using FAR subpart 15, Contracting by Negotiation. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. A base period of 3 years and two separate 1-year option years with a total duration not to exceed 5 years is anticipated. This item has a Contractor First Article Test Requirement. Deliveries are DLA Direct within 180days of order if FAT is waived and 315 days if FAT is required. There is one FAT waived sources Tri Technologies Inc. (06MA8). This solicitation will be issued on an total small business set aside using full and open competition after exclusion of sources. The applicable drawing references are listed below: CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19200 13022945 REVISION NR DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002191 REVISION NR C DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002192 REVISION NR D DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002195 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002196 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002200 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002203 REVISION NR D DTD 07/24/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002204 REVISION NR D DTD 01/11/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002205 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002207 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE UNK QPL-3150-34 NOT 1 REVISION NR 34 DTD 03/15/2007 PART PIECE NUMBER: IAW REFERENCE UNK QPL-16173-84 NOT 1 REVISION NR 84 DTD 10/29/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12993884 REVISION NR J DTD 01/07/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002197 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002198 REVISION NR E DTD 01/12/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002199 REVISION NR D DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002201 REVISION NR D DTD 01/12/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002202 REVISION NR C DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13002206 REVISION NR B DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12479550 REVISION NR C DTD 05/17/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 98489 80809 REVISION NR DTD 01/24/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 04/26/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13019970 REVISION NR D DTD 07/20/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 09/29/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13022945 REVISION NR DTD 07/31/2008 PART PIECE NUMBER: This NSN is being procured under the First Destination Transportation (FDT) program, and as a result F.O.B. Origin (Government managed freight) and Inspection/Acceptance at Origin is requested. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. The AMC/AMSC for this item is 1/G. This means the Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling, or manufacturing restrictions. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. The Small Business size standard is 1,000 employees. This item contains a phosphate coating requirement. The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the Nadcap standard for the Phosphate chemical processes. Verification of this certification may be required and must be supplied upon request of the Contracting Officer. This NSN contains one or more components which must meet QPL/QML specifications. This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. This item has technical data some or all of which is subject to export-control regulations. Distribution of the technical data and eligibility for award are limited to those suppliers qualified through JCP certification, or to those licensed by either the Departments of State or Commerce; or to foreign suppliers pursuant to international agreements. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected NationalStock Numbers (NSNs) will require additional permissions to access the associated technical data. In the event a vendor cannotaccess the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, theseinquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations.It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLAwill work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests wereapproved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitationresponses. The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of June 26, 2019. Hard copies of this solicitation are not available. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS. DLA Internet Bid Board System (DIBBS) proposals are not acceptable for this solicitation. Offerors must complete the entire solicitation. Proposals must be submitted on a hard copy of the Request for Proposal (RFP), scanned, and emailed to Emelie.Deslauriers@dla.mil. While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, past performance, and other evaluation factors as identified in the solicitation. Shipping instructions shall be provided with individual delivery orders. Material ordered under the terms of this contract shall be delivered within 180 days after the date of the order. Notwithstanding any other provisions/clauses of this contract, no deliveries shall be made prior to issuance of delivery order (DD Form 1155)..
SPE7L719RX001 Defense Logistics Agency Land and Maritime
6/11/19, 9:56 AM