Remanufacture of KC-135 Gearbox Assemblies, NSN: 1680-00-645-6975 FL and NSN: 1680-00-789-9357 FL
The United States Air Force tough Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of Gearbox Assemblies. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Requirements type contract is contemplated with a one-year basic and four-one year options. The requirements set forth in this notice are defined per Purchase Request FD2030-19-01860 as follows: Written response is required. Item 0001: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-645-6975 FL P/N 5-85679-1; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year – 60 each/year and Option Year I – 60 each/year, Option Year II – 60 each/year, Option Year III – 60 each/year and Option Year IV – 60 each/year. Item 0002: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-789-9357 FL P/N 65-11875; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year – 24 each/year and Option Year I – 24 each/year, Option Year II – 24 each/year, Option Year III – 24 each/year and Option Year IV – 24 each/year. Item 0003: Over and Above. To be negotiated. Item 0004: Data (Not Separately Priced) NSN: 1680-00-645-6975 FL: Function: Emergency Flap Drive Gearbox Assemblies operate the main wing flaps if the right hydraulic system fails. Dimensions: 8.0” h x 4.5” w x 8.0” l and weighs 5.3 lbs. Material: Stainless Steel, Aluminum, Bronz. Delivery: 8 each every month beginning 60 days after receipt of order (ARO) and reparable units. Delivery 8 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. NSN: 1680-00-789-9357 FL: Function: Provides trim control for the rudder. Dimensions: 3.5” h x 5.0” w x 6.0” l and weighs 2.0 lbs. Material: 356T6 Aluminum Alloy QQ- A-601 Compound3 (T6). Delivery: 4 each every month beginning 30 days after receipt of order (ARO) and reparable units. Delivery 4 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. Duration of Contract Period: 5 Year Requirements Contract (Basic Year with Four – 1 Year Options) Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. Small Business Set Aside In order to receive any technical data related to this acquisition, offerors must send an email request to Welth Cooper at Welth.Cooper@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.** Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production. Export Control: N/A This is a competitive requirement to approved Small Businesses: The RMC is R1/C. Set-aside: Set-Aside to approved Small Businesses. The Government intends to issue solicitation FA8118-19-R-0055 on or about 1 August 2019 with a closing response date of 3 September 2019 and estimated award date of on or about 16 October 2019. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. APPLICABLE TECHNICAL ORDERS Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/ TITLE/REVISION AND/OR OTHER TO NUMBER DIRECTIVES (AFTO FORM 252) 5-85679-1 16G1-49-3 Overhaul Instructions with Parts Breakdown 65-11875 16G1-100-3 Overhaul Instructions with Parts Breakdown General Technical Orders TO NUMBER DATE TITLE 00-5-1 14 JUNE 2016 AF TECHNICAL ORDER SYSTEM 00-5-3 1 APRIL 2016 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-35D-54 1 SEPTEMBER 2015 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 12 DECEMBER 2016 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 6 AUGUST 2001 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT DD1574 SERVICEABLE TAG – MATERIEL DD1574-1 SERVICEABLE LABEL – MATERIEL DD1577-2 UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL DD1577-3 UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL DD1577 UNSERVICEABLE (CONDEMNED) TAG – MATERIEL DD1577-1 UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL DD1575 SUSPENDED TAG – MATERIEL DD1575-1 SUSPENDED LABEL – MATERIEL AFMC FORM 158 PACKAGING REQUIREMENTS CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A N/A N/A OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.
FA8118-19-R-0055 Department of the Air Force Materiel Command Air Force Sustainment Center
2/20/20, 6:17 PM Remanufacture of KC-135 Gearbox Assemblies, NSN: 1680-00-645-6975 FL and NSN: 1680-00-789-9357 FL
The United States Air Force tough Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of Gearbox Assemblies. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Requirements type contract is contemplated with a one-year basic and four-one year options. The requirements set forth in this notice are defined per Purchase Request FD2030-19-01860 as follows: Written response is required. Item 0001: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-645-6975 FL P/N 5-85679-1; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year – 60 each/year and Option Year I – 60 each/year, Option Year II – 60 each/year, Option Year III – 60 each/year and Option Year IV – 60 each/year. Item 0002: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-789-9357 FL P/N 65-11875; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year – 24 each/year and Option Year I – 24 each/year, Option Year II – 24 each/year, Option Year III – 24 each/year and Option Year IV – 24 each/year. Item 0003: Over and Above. To be negotiated. Item 0004: Data (Not Separately Priced) NSN: 1680-00-645-6975 FL: Function: Emergency Flap Drive Gearbox Assemblies operate the main wing flaps if the right hydraulic system fails. Dimensions: 8.0” h x 4.5” w x 8.0” l and weighs 5.3 lbs. Material: Stainless Steel, Aluminum, Bronz. Delivery: 8 each every month beginning 60 days after receipt of order (ARO) and reparable units. Delivery 8 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. NSN: 1680-00-789-9357 FL: Function: Provides trim control for the rudder. Dimensions: 3.5” h x 5.0” w x 6.0” l and weighs 2.0 lbs. Material: 356T6 Aluminum Alloy QQ- A-601 Compound3 (T6). Delivery: 4 each every month beginning 30 days after receipt of order (ARO) and reparable units. Delivery 4 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. Duration of Contract Period: 5 Year Requirements Contract (Basic Year with Four – 1 Year Options) Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. Small Business Set Aside In order to receive any technical data related to this acquisition, offerors must send an email request to Welth Cooper at Welth.Cooper@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.** Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production. Export Control: N/A This is a competitive requirement to approved Small Businesses: The RMC is R1/C. Set-aside: Set-Aside to approved Small Businesses. The Government intends to issue solicitation FA8118-19-R-0055 on or about 21 February 2020 with a closing response date of 23 March 2020 and estimated award date of on or about 31 May 2020. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. APPLICABLE TECHNICAL ORDERS Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/ TITLE/REVISION AND/OR OTHER TO NUMBER DIRECTIVES (AFTO FORM 252) 5-85679-1 16G1-49-3 Overhaul Instructions with Parts Breakdown 65-11875 16G1-100-3 Overhaul Instructions with Parts Breakdown General Technical Orders TO NUMBER DATE TITLE 00-5-1 14 JUNE 2016 AF TECHNICAL ORDER SYSTEM 00-5-3 1 APRIL 2016 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-35D-54 1 SEPTEMBER 2015 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 12 DECEMBER 2016 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 6 AUGUST 2001 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT DD1574 SERVICEABLE TAG – MATERIEL DD1574-1 SERVICEABLE LABEL – MATERIEL DD1577-2 UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL DD1577-3 UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL DD1577 UNSERVICEABLE (CONDEMNED) TAG – MATERIEL DD1577-1 UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL DD1575 SUSPENDED TAG – MATERIEL DD1575-1 SUSPENDED LABEL – MATERIEL AFMC FORM 158 PACKAGING REQUIREMENTS CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A N/A N/A OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.
FA811819R0055_Updated Department of the Air Force Materiel Command Air Force Sustainment Center
2/6/20, 8:22 PM Synopsis - Remanufacture of KC-135 Gearbox Assemblies NSN: 1680-00-645-6975 FL; P/N 5-85679-1 & NSN 1680-00-789-9357 FL; P/N 65-11875
The United States Air Force tough Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of Gearbox Assemblies. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Requirements type contract is contemplated with a one-year basic and four-one year options. The requirements set forth in this notice are defined per Purchase Request FD2030-19-01860 as follows: Written response is required. Item 0001: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-645-6975 FL P/N 5-85679-1; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year - 60 each/year and Option Year I - 60 each/year, Option Year II - 60 each/year, Option Year III - 60 each/year and Option Year IV - 60 each/year. Item 0002: Gearbox Assembly, Basic Year plus Four - 1 Year Options; NSN: 1680-00-789-9357 FL P/N 65-11875; Applicable to KC-135 aircraft for a best estimated quantity (BEQ) of Base Year - 24 each/year and Option Year I - 24 each/year, Option Year II - 24 each/year, Option Year III - 24 each/year and Option Year IV - 24 each/year. Item 0003: Over and Above. To be negotiated. Item 0004: Data (Not Separately Priced) NSN: 1680-00-645-6975 FL: Function: Emergency Flap Drive Gearbox Assemblies operate the main wing flaps if the right hydraulic system fails. Dimensions: 8.0" h x 4.5" w x 8.0" l and weighs 5.3 lbs. Material: Stainless Steel, Aluminum, Bronz. Delivery: 8 each every month beginning 60 days after receipt of order (ARO) and reparable units. Delivery 8 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. NSN: 1680-00-789-9357 FL: Function: Provides trim control for the rudder. Dimensions: 3.5" h x 5.0" w x 6.0" l and weighs 2.0 lbs. Material: 356T6 Aluminum Alloy QQ- A-601 Compound3 (T6). Delivery: 4 each every month beginning 30 days after receipt of order (ARO) and reparable units. Delivery 4 each every 30 days thereafter; until production is complete. Early delivery is acceptable. Ship To: Shipping instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. Duration of Contract Period: 5 Year Requirements Contract (Basic Year with Four - 1 Year Options) Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. Small Business Set Aside In order to receive any technical data related to this acquisition, offerors must send an email request to Welth Cooper at Welth.Cooper@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.** Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production. Export Control: N/A This is a competitive requirement to approved Small Businesses: The RMC is R1/C. Set-aside: Set-Aside to approved Small Businesses. The Government intends to issue solicitation FA8118-19-R-0055 on or about 1 August 2019 with a closing response date of 3 September 2019 and estimated award date of on or about 16 October 2019. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. APPLICABLE TECHNICAL ORDERS Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/ TITLE/REVISION AND/OR OTHER TO NUMBER DIRECTIVES (AFTO FORM 252) 5-85679-1 16G1-49-3 Overhaul Instructions with Parts Breakdown 65-11875 16G1-100-3 Overhaul Instructions with Parts Breakdown General Technical Orders TO NUMBER DATE TITLE 00-5-1 14 JUNE 2016 AF TECHNICAL ORDER SYSTEM 00-5-3 1 APRIL 2016 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-35D-54 1 SEPTEMBER 2015 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 12 DECEMBER 2016 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 6 AUGUST 2001 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT DD1574 SERVICEABLE TAG - MATERIEL DD1574-1 SERVICEABLE LABEL - MATERIEL DD1577-2 UNSERVICEABLE (REPAIRABLE) TAG - MATERIEL DD1577-3 UNSERVICEABLE (REPAIRABLE) LABEL - MATERIEL DD1577 UNSERVICEABLE (CONDEMNED) TAG - MATERIEL DD1577-1 UNSERVICEABLE (CONDEMNED) LABEL - MATERIEL DD1575 SUSPENDED TAG - MATERIEL DD1575-1 SUSPENDED LABEL - MATERIEL AFMC FORM 158 PACKAGING REQUIREMENTS CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A N/A N/A OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable..
FA8118-19-R-0055 Department of the Air Force Materiel Command Lifecycle Management Center Tinker Air Force Base
7/17/19, 5:34 PM Remanufacture of KC-135 Gearbox Assemblies, NSN: 1680-00-645-6975 FL and NSN: 1680-00-789-9357 FL
NOTICE OF CONTRACT AWARD. Awarded contract FA8118-20-D-0028 to THOMAS INSTRUMENT, INCORPORATED for 837708.00 on 2020-07-28.
FA8118-19-R-0055 Department of the Air Force Materiel Command Air Force Sustainment Center
7/28/20, 8:33 PM