Project Grant 2423177
Award Date
9/1/25
Completion Date
8/31/28
Dollars Obligated
$650K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Madison, WI 53715, USA
Similar Awards
This National Science Foundation (NSF) Faculty Early Career Development (CAREER) Program grant, awarded under the Engineering program (CFDA 47.041), supports fundamental research at Iowa State University to understand and control multi-material aerosol jet printing. This $621,008 grant, active from July 2024 to June 2029, aims to establish mechanistic knowledge and digital control of this printing technique to fabricate custom gradients in material composition and properties for applications...
This Project Grant awarded by the National Science Foundation (CFDA 47.041 - Engineering) supports research into an innovative manufacturing technique for producing thin polymer films. The total award amount is $517,969.00 over the period from January 1, 2025 to December 31, 2027. The research aims to develop a comprehensive framework for the electrospray deposition process by integrating experiments, computational modeling, and artificial intelligence/machine learning methods. This will...
This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) provides $436,945 to the University of Houston System to conduct research on laser-induced bubble dynamics and the mechanisms driving hydrogel jet formation in laser-assisted printing processes. The goal is to integrate experimental and numerical methods to elucidate the complex, multiscale dynamics of these phenomena, which are critical for advancing 3D printing technologies for soft...
This National Science Foundation (NSF) Engineering Program (CFDA 47.041) $150,000 Project Grant award to the University of Wisconsin-Madison funds a 2-year exploratory research project titled "EAGER: Collaborative Research: Real-Time Heterogeneous Transfer Active Learning to Bridge Knowledge Gaps in System Integration Under Environmental Uncertainty." The project aims to develop a real-time transfer learning framework to enhance uncertainty quantification and quality control for...
The National Science Foundation (NSF) awarded a $293,493 Project Grant under the Integrative Activities (CFDA 47.083) program to the Marshall University Research Corporation in Huntington, West Virginia. This 2-year grant will fund a research fellowship for an assistant professor and graduate student to investigate the aerodynamics of aerosol jet printing for high-resolution manufacturing of printed electronic devices in collaboration with researchers at the NASA Marshall Space Flight Center....
This $296,000 federal Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) aims to develop a comprehensive fundamental understanding of the dynamic drying process of particle-laden slurries. The research collaboration between the University of Texas at Austin and the University of Wisconsin-Madison will establish the correlation between drying conditions and multi-scale structural ordering, image and predict the spatiotemporal evolution of the...
This National Science Foundation (NSF) Engineering program (CFDA 47.041) Project Grant award of $521,832 supports research to develop an "all-on-a-chip" nanomanufacturing system capable of additively printing three-dimensional features at the deep-nanometer scale. The research aims to leverage advancements in electrified droplet ejection and nanofluidics to enable the use of yoctoliter-to-zeptoliter scale droplets for high-resolution, integrated circuit-compatible additive...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) provides $361,985 to the University of Wisconsin System to develop predictive mathematical models for manufacturing processes involving complex polymeric materials. The project aims to leverage recent advances in experimental methods and data science to better understand the relationship between the flow and microstructure of these materials, which is critical for applications like printed...
This $257,665 project grant, awarded by the National Science Foundation (NSF) under the Integrative Activities program (CFDA 47.083), aims to establish an innovative electrohydrodynamic (EHD) 3D printing technology for fabricating microscale 3D electronics. The key objectives are: 1) studying the relationship between ink composition and rheological properties, 2) investigating spatial photonic sintering of metallic nanoparticles, and 3) developing the "Intense Pulsed Light Assisted EHD 3D...
This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) provides $198,932 to the University of Wyoming to conduct fundamental research on improving the additive manufacturing of soft elastomers. The research aims to elucidate the key process dynamics governing vat photopolymerization 3D printing of these materials, with the goal of enabling high-fidelity printing for applications such as biomedical devices and soft robotics. The project involves...