Project Grant 2502245
Award Date
8/1/25
Completion Date
7/31/27
Dollars Obligated
$199K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Laramie, WY 82071, USA
Similar Awards
This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) is funding research at The Leland Stanford Junior University to engineer a transformative new vat polymerization process for advanced manufacturing, named "ICLIP". The key objectives are to develop computer simulation and theory to enable injection of resin through the printed part during the additive manufacturing process, which could result in a two order of magnitude increase in...
This Project Grant award from the National Science Foundation (NSF) Directorate for Engineering (CFDA 47.041) totaling $344,918 will establish a collaborative research program at Florida International University (FIU) to develop advanced data-driven approaches for additive manufacturing (AM) or 3D printing of materials with locally tunable electrical and mechanical properties. The research aims to create new polymer resin formulations for digital light processing (DLP) 3D printing that can...
This $404,595 National Science Foundation (NSF) Engineering program grant, awarded to the University of Delaware on March 1, 2024, supports research to enhance multi-material additive manufacturing (3D printing) through the use of advective assembly techniques. The project aims to develop modular 3D printing nozzles capable of rapidly structuring and depositing multi-material composites at higher resolution and volumetric throughput than conventional methods. This could enable new applications...
This National Science Foundation Project Grant award of $231,806 provides funding from April 1, 2023 through March 31, 2025 to the University of Nevada, Reno under the Integrative Activities program (CFDA 47.083). The award will support research exploring microstructure evolution in stimuli-responsive yield-stress fluids for assisted 3D printing applications. Specifically, the university will characterize static microstructure models in a Pluronic F127-nanoclay nanocomposite and explore...
This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) provides $436,945 to the University of Houston System to conduct research on laser-induced bubble dynamics and the mechanisms driving hydrogel jet formation in laser-assisted printing processes. The goal is to integrate experimental and numerical methods to elucidate the complex, multiscale dynamics of these phenomena, which are critical for advancing 3D printing technologies for soft...
This $200,000 National Science Foundation (NSF) Engineering grant (CFDA 47.041) supports fundamental research at Texas State University to investigate material-process-microstructure-property relationships in the direct ink writing of high-viscosity rubber nanocomposites. The goal is to optimize material composition and manufacturing process parameters to achieve high-quality 3D-printed parts with enhanced mechanical, electromechanical, and time-dependent properties. Key activities include...
This National Science Foundation Project Grant of $319,476 will fund research at the University of Virginia from March 2023 through February 2026 under the Engineering program (CFDA 47.041). The research aims to establish the foundational science for voxelated bioprinting through elucidating the nonlinear fluid dynamics of all-aqueous printing of viscoelastic droplets in yield-stress fluids. A printing platform will be developed to study droplet printing dynamics in real time. Control strategies...
The National Science Foundation awarded a $657,610 Project Grant to the University of Pittsburgh under the Engineering program (CFDA 47.041) to support research toward establishing a novel dual-wavelength photoinhibition aided photopolymer additive manufacturing process. The university will develop a digital light processing method using a second wavelength light to curb curing and enhance the geometric fidelity and functional integrity of parts. Key activities include elucidating light...
The National Science Foundation (NSF) awarded a $550,000 Project Grant under the Engineering program (CFDA 47.041) to the University of Illinois. The grant supports research into a mold-free, additive manufacturing process called "Growth Printing" that uses a self-propagating polymerization front to rapidly produce polymer parts without the need for expensive molds. The key objectives are to study the laser initiation of this frontal polymerization process, the geometry and physics...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) provides $361,985 to the University of Wisconsin System to develop predictive mathematical models for manufacturing processes involving complex polymeric materials. The project aims to leverage recent advances in experimental methods and data science to better understand the relationship between the flow and microstructure of these materials, which is critical for applications like printed...