Project Grant 2331131
Award Date 9/1/24
Completion Date 8/31/27
Dollars Obligated $538K
Federal Grant Program
Assistance Type
Project Grant
Place of Performance
Hanover, NH 03755, USA
Similar Awards
- This $122,531 Project Grant awarded by the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports research into fabricating columnar-grained microstructures and single crystals of nickel-based superalloys through directional recrystallization of additively manufactured materials. The goal is to develop a cost-effective method for producing nickel-based superalloy turbine blades, a key component in jet engines that currently cost over $15,000 each. The project will...
- This five-year, $641,328 National Science Foundation Project Grant supports research at the Colorado School of Mines to advance additive manufacturing of nickel-based superalloys for clean energy applications. Funded through NSF's Engineering program (CFDA 47.041), the award will develop a mechanistic understanding of how wire arc additive manufacturing processing conditions influence the microstructure and high-temperature mechanical properties of Haynes 282 superalloy. The research combines...
- This $300,000 Project Grant awarded by the National Science Foundation (NSF) Engineering program (CFDA 47.041) will fund the development of new metallic materials for high-temperature applications critical to improving the efficiency of jet engines and turbines. The grant recipient, The Ohio State University, will work with collaborators at NASA Glenn Research Center, GE Aerospace, and the Air Force Research Laboratory to utilize a novel additive manufacturing approach to create oxide dispersion...
- This Project Grant award from the National Science Foundation (NSF), under the Engineering program (CFDA 47.041), provides $649,345 to Carnegie Mellon University to investigate an innovative power field control strategy to achieve prescribed thermal histories throughout parts produced via powder bed fusion additive manufacturing. The research aims to enable the design of novel processing pathways to tailor material properties, fully utilizing the processing capabilities of open-architecture...
- The National Science Foundation (NSF) awarded a $250,000 Project Grant to Cornell University under the Engineering CFDA program to develop fundamental research and manufacturing science for producing metal matrix composites via cold spray additive manufacturing. The 4-year project aims to advance the understanding of process-microstructure-property relationships for cold spraying metal matrix composites and leverage this knowledge for applications in aerospace, energy, and defense industries....
- This National Science Foundation (NSF) Project Grant award, under the NSF Engineering program (CFDA 47.041), provides $475,399 to Auburn University to conduct fundamental research on laser nanoparticle powder-bed fusion, an additive nanomanufacturing process. The research aims to develop layer-by-layer fabrication of micro- and nano-scale functional structures and devices with tunable chemical compositions, interface interactions, and physical architectures. This work has potential...
- The National Science Foundation awarded a $526,334 Project Grant to the University of Pittsburgh through the Engineering program (CFDA 47.041) to support research titled "CAREER: UNRAVELING FUNDAMENTAL MECHANISMS GOVERNING GRAIN REFINEMENT IN COMPLEX CONCENTRATED ALLOYS MADE BY ADDITIVE MANUFACTURING TOWARDS STRONG AND DUCTILE STRUCTURES." The five-year award, effective April 15, 2021 through March 31, 2026, will fund research investigating fundamental mechanisms governing...
- This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports a collaborative research project focused on developing intelligent scan sequence generation to reduce local overheating, distortion, and residual stress in laser powder bed fusion (LPBF) additive manufacturing. The $250,000 award, spanning January 1, 2025 to December 31, 2027, will enable researchers at the University of Pittsburgh to mathematically, numerically, and experimentally...
- This National Science Foundation (NSF) Designing Materials to Revolutionize and Engineer our Future (DMREF) Project Grant award, valued at $150,000 and running from October 1, 2023 to September 30, 2027, supports collaborative research to develop simulation-informed models for additive manufacturing of amorphous metals. The research team at The Washington University aims to derive meaningful measures of material structure from electron nanodiffraction and simulation data, and build predictive...
- The National Science Foundation (NSF) Directorate for Engineering (CFDA 47.041) awarded a $200,627 project grant to the Florida Institute of Technology Inc. (Florida TECH), a private university and non-profit organization, to conduct research on understanding fracture mechanics in additively manufactured functionally graded microcellular solids. The objectives of this 3-year research project are to: (1) demonstrate the production of different microcellular structures using additive...