Project Grant 2241007

Award Date 6/1/23
Completion Date 5/31/26
Dollars Obligated $321K
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Tempe, AZ 85287, USA
Similar Awards
This three-year $379,759 project grant from the National Science Foundation's Engineering program (CFDA 47.041) supports research at Arizona State University to promote lithium sulfide redox cycles for battery applications. The university will conduct collaborative research from September 2021 to August 2024 to develop atomically dispersed active sites in lithium sulfides with the goal of improving energy storage capabilities. As the sole awardee, Arizona State University will leverage its...
This two-year, $202,433 project grant from the National Science Foundation's Integrative Activities program (CFDA 47.083) will support the development of composite solid electrolytes to enable high-energy, cost-effective all-solid-state lithium-sulfur batteries. Under the award, an assistant professor at the University of New Mexico will receive a fellowship to study the stability of electrode-electrolyte interfaces in solid-state lithium-sulfur batteries using composite electrolytes. A graduate...
The National Science Foundation (NSF) Engineering program (CFDA 47.041) awarded a $321,634 project grant to Cornell University to develop next-generation lithium-sulfur (Li-S) batteries capable of operating at practical temperatures. The university is collaborating with industry partners Saft Batteries and Nikola Motors to address key barriers for Li-S battery performance, including improving the electrolyte and mitigating capacity loss from polysulfide shuttling. The research aims to enable...
The National Science Foundation Division of Chemical, Bioengineering, Environmental, and Transport Systems awarded a $211,439 Project Grant to The Research Foundation For The State University Of New York on April 15, 2021 to investigate energy density limitation for lithium sulfur batteries. This award falls under the NSF Directorate for Engineering's Engineering program (CFDA 47.041), which seeks to improve quality of life and economic strength through engineering research and education....
This $300,000 Project Grant from the National Science Foundation (NSF), under the Engineering program (CFDA 47.041), will fund fundamental high-risk research at Iowa State University on new polycrystalline solid electrolytes for developing safer, more energy dense solid-state batteries. The University will examine the structural chemistry of mixing boron, oxygen, and sulfur to create new lithium thioborate and oxygen-doped lithium oxy-thioborate solid electrolytes. It will test hypotheses that...
The National Science Foundation awarded a $241,299 Project Grant to the University of Notre Dame's Notre Dame Research division to develop innovative electrolytes for intermediate-temperature sodium-sulfur and potassium-sulfur batteries. The goal is to identify new solvents that can dissolve the insoluble reaction products formed during battery discharge, enabling higher specific capacity and energy density. The research will utilize a simulation-driven approach combining molecular dynamics...
This $282,020 project grant from the National Science Foundation's Division of Chemical, Bioengineering, Environmental, and Transport Systems will fund research at Northern Illinois University from October 2022 to September 2025. The research aims to advance understanding of reversible sodium hydrosulfide formation in hybrid electrolytes to enable high energy density sodium-sulfur battery technology. Specifically, the university will conduct fundamental studies using X-ray scattering...
The National Science Foundation (NSF) awarded a $386,258 Project Grant under their Engineering (CFDA 47.041) program to The Trustees of Columbia University in the City of New York. The grant funds a collaborative research project to develop innovative electrolytes for intermediate-temperature sodium-potassium/sulfur (Na-K/S) batteries to enable long-duration energy storage (>10 hours) for intermittent renewable energy applications. The project will utilize material design and...
This National Science Foundation (NSF) Engineering program (CFDA 47.041) grant award of $296,729 to Michigan State University (MSU) supports fundamental research and development to address the challenge of polysulfide shuttling in lithium-sulfur (Li-S) batteries. The project aims to develop surface-engineered cerium oxide host materials to immobilize lithium polysulfides and promote their conversion, in order to improve the performance and lifecycle of Li-S batteries. The research approach...
This $178,617 Project Grant award from the National Science Foundation's (NSF) Mathematical and Physical Sciences program (CFDA 47.049) supports research by Arizona State University (ASU) to develop transformative electrodeposition methods for the direct deposition of lithium and sodium onto suitable substrates without the formation of dendrites. The goal is to enable improved storage capacity and charging rates for lithium-ion and sodium-based battery technologies. Key research activities...

Arizona State University was awarded a $320,746 project grant from the National Science Foundation Division of Chemical, Bioengineering, Environmental, and Transport Systems to conduct collaborative research understanding sulfur-carbon-solid electrolyte interfaces of lithium/sulfur solid-state batteries. The three-year award, made on June 1, 2023 under the NSF Engineering (47.041) program, will fund fundamental studies of interfaces in lithium/sulfur composite cathodes employing garnet-type lithium lanthanum zirconium oxide as a solid electrolyte. Specifically, the University will obtain an improved understanding of reaction mechanisms using model systems and in operando/ex situ analysis techniques. It will also elucidate influential thermodynamic and kinetic parameters and investigate design parameters such as particle size and morphology in sulfur/solid-state electrolyte composite cathodes. The University's expertise in lithium/sulfur cell chemistry, solid-state battery technology, and synchrotron-based characterization will enable comprehensive methodology for next-generation energy storage systems. Results are intended to lead to innovative sulfur-garnet composite cathode design favorable for fast, sustainable electrochemical processes.

Generated 3/5/24, 1:36 AM