Project Grant 2240069
Award Date
5/1/23
Completion Date
4/30/28
Dollars Obligated
$582K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Arlington, TX 76019, USA
Similar Awards
This $599,342 National Science Foundation (NSF) project grant, awarded under the Engineering program (CFDA 47.041), supports fundamental research to develop a novel additive manufacturing (AM) approach for fabricating high-performance tungsten alloy components. The research, conducted by The Research Foundation for the State University of New York (RF SUNY), aims to address the challenges in producing dense, crack-free tungsten alloy parts through AM by integrating compression-enabled filament...
This National Science Foundation (NSF) Engineering program (CFDA 47.041) Project Grant award of $570,160 supports research to integrate multiple thermal energy sources, such as laser, induction heating, and ultrasonic vibration, to enable defect-free high deposition rate metal additive manufacturing. The research aims to establish dynamic control of energy inputs to achieve favorable thermal distribution, increase material deposition by preheating the substrate and powders, minimize residual...
The National Science Foundation (NSF) awarded a $183,420 Project Grant under the Engineering program (CFDA 47.041) to the University of Texas at Arlington (UTA) Office of Research Administration Division. The grant will fund a collaborative research project to develop an integrated materials-manufacturing-controls framework for enhancing the efficiency and resilience of manufacturing systems. Key objectives include: 1) quantifying the effects of raw ingredients on feedstock properties, 2)...
The National Science Foundation awarded a $400,728 Project Grant to the University of Texas at El Paso through the Engineering program (CFDA 47.041) to acquire an open-source electron beam powder bed fusion platform. This platform will expand the university's advanced manufacturing research and education capabilities by allowing the production of metal parts using 3D printing technology. Funded activities are expected to be completed by July 31, 2023, as the platform's acquisition on August...
The National Science Foundation awarded a $599,997 Project Grant to the University of Texas at El Paso through the Engineering (47.041) federal grant program. The grant will fund the "BRITE RELAUNCH: Realizing the Benefits of Additive Manufacturing for the Microstructural Control of Polymer Material Systems" project from January 15, 2023 through December 31, 2025. The project aims to advance additive manufacturing-enabled microstructural control of polymers to enable shape memory and...
The National Science Foundation Division of Industrial Innovation awarded a $249,985 Project Grant to the University of Texas at Austin under the Engineering (47.041) federal grant program. The grant advances the development of microscale selective laser sintering technology to fabricate high-density 3D metal structures with feature sizes less than 5 micrometers and aspect ratios over 20:1. This technology is expected to enable manufacturing of high-performance semiconductor packaging at rates...
This five-year, $526,186 Project Grant from the National Science Foundation's Division of Civil, Mechanical, and Manufacturing Innovation, under the Engineering program (CFDA 47.041), will fund fundamental research on wire arc additive manufacturing of molybdenum alloys for high-temperature applications at Tennessee Technological University. The university will explore process-induced residual stresses and pore formation in molybdenum alloy structures fabricated via wire arc additive...
This $496,138 project grant, awarded by the National Science Foundation's (NSF) Engineering program (CFDA 47.041), supports collaborative research to develop methods for optimizing laser powder bed fusion (LPBF) additive manufacturing scan sequences. The research aims to uncover relationships between scan sequences, temperature distribution, distortion, and residual stress in LPBF to enable manufacturing of complex metallic parts with fewer defects. Key objectives include incorporating...
The University of Texas at Austin was awarded a $432,013 Project Grant from the National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation. The grant is part of NSF's Engineering program (CFDA 47.041) to support research improving the quality of life and economic strength of the nation through engineering innovation and education. Under the three-year award beginning June 1, 2021, the University will research mechanisms for film formation during room temperature...
The University of Texas at Arlington received a $553,983 Project Grant award from the Department of the Army Materiel Command Research Development and Engineering Command on May 1, 2021 to develop a 3D nanostructural diagnostics system. The award supports the development of this system through April 30, 2022 under the Basic, Applied, and Advanced Research in Science and Engineering program (CFDA 12.630). This program aims to support basic, applied, or advanced research with good long-term...