Project Grant 2231607
Award Date
9/1/23
Completion Date
8/31/26
Dollars Obligated
$409K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Ann Arbor, MI 48109, USA
Similar Awards
This $247,667 Project Grant from the National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation, under the Engineering federal grant program (CFDA 47.041), will fund collaborative research on laser powder-fed directed energy deposition (LP-DED) additive manufacturing. The University of Michigan will investigate fundamental interactions between high-speed metal particles and molten pools in LP-DED using synchrotron X-ray imaging and computational process modeling....
The National Science Foundation awarded a $183,970 project grant to the University of Michigan under the Engineering program (CFDA 47.041) to conduct collaborative research on modulating powder bed cohesion to reduce defects in binder jetting 3D printing. The research aims to test the hypothesis that pre-wetting powder will suppress powder scattering and reduce pore formation during the binder jetting process by accelerating binder absorption and increasing powder bed cohesion. The University of...
The National Science Foundation awarded a $567,121 Project Grant to Michigan State University under the Engineering (47.041) federal grant program. The grant funds fundamental research to develop a new metal additive manufacturing process using light projection of mixtures of photopolymer and metal powder. Rather than point-by-point printing, the proposed process would use digital light projection to cure an entire layer of photopolymer mixed with metal powder. This could enable high-speed...
The University of Michigan was awarded a three-year $650,000 Project Grant from the National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation under the Engineering federal grant program (CFDA 47.041). The grant will support research exploring in situ nanoparticle synthesis and redistribution during solidification of metal matrix nanocomposites. Specifically, the University of Michigan will conduct experiments and analysis to better understand how nanoparticles...
The National Science Foundation (NSF) Division of Civil, Mechanical, and Manufacturing Innovation awarded a $374,414 Project Grant to the Regents of the University of Michigan Office of Research and Sponsored Projects (dba University of Michigan) under the Engineering program (CFDA 47.041). The grant supports a 3-year collaborative research project to characterize, model, and predict the mechanical response of non-uniform soft materials, such as graded hydrogels, subjected to rapid bubble...
This Project Grant award from the National Science Foundation (NSF) Directorate for Engineering (CFDA 47.041) totaling $344,918 will establish a collaborative research program at Florida International University (FIU) to develop advanced data-driven approaches for additive manufacturing (AM) or 3D printing of materials with locally tunable electrical and mechanical properties. The research aims to create new polymer resin formulations for digital light processing (DLP) 3D printing that can...
This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) is funding research at The Leland Stanford Junior University to engineer a transformative new vat polymerization process for advanced manufacturing, named "ICLIP". The key objectives are to develop computer simulation and theory to enable injection of resin through the printed part during the additive manufacturing process, which could result in a two order of magnitude increase in...
This National Science Foundation (NSF) Engineering Program (CFDA 47.041) Project Grant, awarded to the Regents of the University of Michigan, supports a $496,138 collaborative research effort to develop an approach for optimally determining laser scan sequences in laser powder bed fusion (LPBF) additive manufacturing. The goal is to create knowledge that enables 3D printing of complex metallic parts with fewer failed or defective prints, thereby improving the economic viability of LPBF. The...
This $404,595 National Science Foundation (NSF) Engineering program grant, awarded to the University of Delaware on March 1, 2024, supports research to enhance multi-material additive manufacturing (3D printing) through the use of advective assembly techniques. The project aims to develop modular 3D printing nozzles capable of rapidly structuring and depositing multi-material composites at higher resolution and volumetric throughput than conventional methods. This could enable new applications...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) provides $400,000 in funding to the Regents of the University of Michigan to conduct collaborative research on liquid crystal-templated chemical vapor polymerization for manufacturing novel nanofiber network coatings. The research aims to expand the capabilities of chemical vapor polymerization to enable the large-scale production of structured polymer coatings with tailored nanoscale...