Project Grant 2230857
Award Date
7/1/22
Completion Date
6/30/23
Dollars Obligated
$100K
Federal Agency
National Science Foundation
Federal Grant Program
47.084
Assistance Type
Project Grant
Place of Performance
Fayetteville, AR 72701, USA
Similar Awards
This Project Grant award from the National Science Foundation (NSF) Integrative Activities program (CFDA 47.083) provides $255,963 to the University of Arkansas to develop and demonstrate an immersion-cooled, 3D-printed stator technology for high-specific-power electric motors. The project aims to overcome the challenge of lower electrical conductivity in 3D-printed windings through electromagnetic and thermal co-design to achieve superior motor efficiency, reliability, and specific power. The...
This Project Grant was awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084). The $274,579 award to Variables Machines Company aims to develop a reconfigurable additive manufacturing print bed composed of an array of linear actuators. This technology is expected to significantly reduce the cost, lead time, and material waste associated with large format additive manufacturing. The project entails designing the actuator...
The National Science Foundation awarded the University of Arkansas at Little Rock a $100,000 Project Grant under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084). The grant funds the development of an emerging surface coating technology to apply ceramic and composite coatings to metal parts. The goal is to improve mechanical properties like hardness and adhesion strength as well as tribological behaviors related to friction and wear resistance. The proposed coating method...
The National Science Foundation (NSF) awarded a 5-year, $463,417 CAREER grant to the University of Nebraska (UNL) under the NSF Engineering program (CFDA 47.041) to establish a scalable manufacturing approach for incorporating diverse solid particle additives into room temperature liquid metals. This work will lead to the creation of a novel class of multiphase conductive pastes with customizable physical, rheological, and chemical properties. The enhanced properties will increase the...
This $500,050 Future Manufacturing Research Grant (FMRG) award from the National Science Foundation's Division of Materials Research (DMR) and Engineering Directorates seeks to expand industrial adoption of metal additive manufacturing using an efficient molten metal droplet jetting process. The research aims to enable additive manufacturing of metal components that are cost, speed, and quality competitive with traditional casting and machining processes. Key objectives include developing high...
This $404,595 National Science Foundation (NSF) Engineering program grant, awarded to the University of Delaware on March 1, 2024, supports research to enhance multi-material additive manufacturing (3D printing) through the use of advective assembly techniques. The project aims to develop modular 3D printing nozzles capable of rapidly structuring and depositing multi-material composites at higher resolution and volumetric throughput than conventional methods. This could enable new applications...
The National Science Foundation (NSF) awarded a $183,420 Project Grant under the Engineering program (CFDA 47.041) to the University of Texas at Arlington (UTA) Office of Research Administration Division. The grant will fund a collaborative research project to develop an integrated materials-manufacturing-controls framework for enhancing the efficiency and resilience of manufacturing systems. Key objectives include: 1) quantifying the effects of raw ingredients on feedstock properties, 2)...
This $619,688 federal Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports research to advance additive manufacturing (AM) of rare earth permanent magnets. The award funds a collaboration between the University of Nebraska-Lincoln and the India Institute of Technology-Kharagpur to: (1) design specialized alloys for AM processing, (2) conduct in-situ studies of the AM process, and (3) fabricate part-level magnets using commercial laser powder...
Additive Manufacturing Innovations LLC received a $256,000 Project Grant award from the National Science Foundation under the Small Business Technology Transfer (STTR) program. The award will support the development of a next-generation, computationally efficient software for simulating additive manufacturing processes of metals from August 1, 2021 through July 31, 2022. The National Science Foundation's Technology, Innovation, and Partnerships Directorate seeks to advance science,...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) to Arizona State University provides $620,013 to conduct fundamental research on additive manufacturing of novel structural batteries made with carbon fiber reinforced composites. The goal is to develop a novel coextrusion-based 3D printing process to integrate energy storage and structural load bearing functions into a single lightweight material for applications like electric transportation....