Project Grant 2124797

Award Date 11/15/21
Completion Date 6/30/23
Dollars Obligated $296K
Federal Grant Program
47.084
Assistance Type
Project Grant
Place of Performance
Tempe, AZ 85287, USA
Similar Awards
This $978,431 Cooperative Agreement award from the National Science Foundation (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) supports the development of an innovative two-phase cooling system using micro closed-loop pulsating heat pipes by Global Cooling Technology Group LLC, a small business specializing in advanced cooling technologies. The project aims to create a disruptive cooling solution that can enhance the performance of high-power density electronics,...
This National Science Foundation (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) Phase I SBIR grant in the amount of $274,773 awarded to DTP Thermoelectrics LLC will support the development of a prototype distributed transport properties (DTP) thermoelectric cooling module. The key objectives are to produce a DTP module capable of achieving a maximum temperature difference greater than 90 Kelvin with a 3-fold increase in cooling efficiency compared to conventional...
The National Science Foundation awarded $275,000 under the Technology, Innovation, and Partnerships federal grant program (CFDA 47.084) to Kazadi Enterprises LTD to develop a Hydrologic Open Cooling System. The project aims to create a renewable, closed container cooling system incorporating rechargeable vacuum insulation and a novel two-stage heat pump. The system is designed to maintain cooling chamber temperatures between 1.5-5 degrees Celsius using 10% or less of the electrical power of...
The National Science Foundation (NSF) awarded a $275,000 Small Business Innovation Research (SBIR) Phase I grant to Taumat LLC, a for-profit limited liability company, under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program. The grant aims to establish a new approach to high-performance central processing unit (CPU) thermal management by developing and applying innovative solid-state thermal energy storage (TES) materials and hardware. The project objectives are to: 1)...
This National Science Foundation (NSF) Cooperative Agreement award under the NSF Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) provides $998,527 to Insu Health Design Inc. to refine and optimize a temperature control and insulation system that leverages thermoelectric coolers and a vacuum flask. The key innovation aims to decouple the thermoelectric coolers from the cooled payload to minimize energy use while maintaining precise temperature control. The project...
This Project Grant award, granted by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), provides $550,000 in funding to Carnegie Mellon University for the development of high-performance, nanostructured thermal pads to enhance heat dissipation in electronics. The key products or services to be delivered under this award include scalable and cost-effective manufacturing strategies to mass produce the nanostructured thermal pads,...
This Project Grant award was provided by the National Science Foundation (NSF) under the "Engineering" program (CFDA 47.041) to the University of Maryland, College Park. The $100,000 award, effective September 1, 2023, will fund a collaborative research project focused on developing an efficient and stable cooling solution for high power-density electronic devices through the use of partial flow-boiling processes with microstructured surfaces and ultrasonics. The key products and...
The Department of Energy's Office of Science awarded a $199,997 Project Grant to Advanced Cooling Technologies Inc. (ACT), a small business manufacturer based in Neffsville, Pennsylvania. The grant, awarded under the Office of Science Financial Assistance Program (CFDA 81.049), will fund a research project to extend the lifetime and reliability of distribution transformers through passive thermal management technologies. The project aims to develop innovative cooling solutions that can improve...
The National Science Foundation (NSF) awarded a $275,000 Project Grant to Planck Energies Inc. under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program. The project aims to develop an environmentally friendly, passive cooling coating that can help reduce the temperature of buildings and provide 5-25% energy savings, thereby reducing the need for traditional air conditioning systems. The key products and services to be delivered include: An innovative paint-like coating...
This Project Grant award from the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) is funding the development of a novel magnetocaloric cooling system for temperature-controlled logistics in the cold chain. The $305,000 award to Artyc PBC will support research to create a reusable, refrigerant-free cooling solution to replace energy-intensive and wasteful passive packaging like dry ice and foam insulation. The project aims to...

Global Cooling Technology Group LLC received a $296,000 Small Business Technology Transfer (STTR) Phase I Project Grant from the National Science Foundation under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084). The grant supports research and development of innovative two-phase cooling technologies using micro closed loop pulsating heat pipes for applications in high power density electronics. The STTR program aims to stimulate technological innovation through cooperative research and development carried out between small businesses and research institutions. This award will allow Global Cooling Technology Group LLC to advance cooling solutions targeting the technical challenges of dissipating heat in compact electronic devices.

Generated 1/6/24, 11:01 PM