Cap Screws 82964041+
SPMYM3-19-Q-5039 Cap Screws JML: 82964041+ This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to FEDBIZOPPS. The RFQ number is SPMYM3-19-Q-5039. This solicitation documents and incorporates provisions and clauses in effect tough FAC 2005-99 and DFARS Change Notice 20180629. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/html/current/252201.htm . The NAICS code is 332722 and the Small Business Standard is 500 Employees. This requirement is a 100% Small Business Set-Aside. If quote total is greater than 25K, Manufacturer MUST also be a small business. Manufacturer Must be listed along with their business size. Place of Manufacture / Country of Origin Required. This is to be evaluated as "All or None" Evaluation criteria is Lowest Price Technically Acceptable (LPTA) however, SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Quotes must be faxed to 207-438-1251 or e-mailed to robert.dowdle@navy.mil A reverse auction may be held. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: MATERIAL INFORMATION ITEM DESCRIPTION U/I QTY UNIT PRICE TOTAL PRICE 0001 HEX HEAD SELF LOCKING CAPSCREW IAW MIL-DTL-1222J TYPE-I AND PC 30 PER DRAWING 7286534/XA. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM-2, COLD DRAWN/HOT FINISHED, ANNEALED & AGE HARDENED, FINISH-A. UNS-N05500. SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE "N" PELLET. OBSERVE ALL APPLICABLE NOTES. Ref: 82964041 U/I: Each QTY: 3 UNIT PRICE__________ TOTAL PRICE_____________ 0002 FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 5/8-11UNRC-3A X 2.30" LONG IAW MIL-DTL-1222J TYPE-II AND PC-35 OF DRAWING 7286534/XA. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM-2, COLD DRAWN/HOT FINISHED, ANNEALED & AGE HARDENED FINISH-B. UNS-N05500. SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE "N" PELLET. OBSERVE ALL APPLICABLE NOTES. Ref: 82964042 U/I: Each QTY: 12 UNIT PRICE__________ TOTAL PRICE_____________ 0003 HEX HEAD CAPSCREW, 0.750-10UNC-3A X 3" LONG. MIL-DTL-1222J TYPE-I. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, GRADE 500, QQ-N-286G FORM-2, CD/HF, ANN & AH. Ref: 82994001 U/I: Each QTY: 9 UNIT PRICE__________ TOTAL PRICE_____________ 0004 FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 1/2-13UNRC-3A X 1.500" LONG IAW FF-S-86E AMEND-4, TY-IV. MATERIAL TO BE NICUAL IAW QQ-N-286G, FORM-2, COLD DRAWN/HOT FINISHED, ANNEALED AND AGE HARDENED; UNS N05500. SELF-LOCKING IAW MIL-DTL 18240F TYPE-N. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY). Ref: 82994011/12/13 U/I: Each QTY: 114 UNIT PRICE__________ TOTAL PRICE_____________ 0005 FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 5/8-11UNRC-3A X 2.000" LONG IAW FF-S-86E AMEND-4, TY-IV. MATERIAL TO BE NICUAL IAW QQ-N-286G, FORM-2, COLD DRAWN/HOT FINISHED, ANNEALED AND AGE HARDENED; UNS N05500. SELF-LOCKING IAW MIL-DTL 18240F TYPE-L. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY). Ref: 82994014 U/I: Each QTY: 51 UNIT PRICE__________ TOTAL PRICE_____________ 0006 SOCKET HEAD CAPSCREW, 1/2-13UNRC-3A X 3" LONG. MIL-DTL-1222J, TYPE-II. MATERIAL TO BE NICKEL-COPPER- ALUMINUM ALLOY, QQ-N-286G FORM-2, UNS-N05500. COLD DRAWN/HOT FINISHED, ANNEALED & AGE HARDENED. SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE "N" PELLET. MARKINGS OF A MINIMUM OF 6 DOTS (APPROX .032 DIA) RAISED OR DEPRESSED (APPROX .010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY) Ref: 83044011 U/I: Each QTY: 72 UNIT PRICE__________ TOTAL PRICE_____________ 0007 SOCKET HEAD CAPSCREW, 1/2-13UNRC-3A X 3-1/4" LONG. FF-S-86E AMEND-4, TYPE-VI. MATERIAL TO BE NICKEL-COPPER- ALUMINUM ALLOY, QQ-N-286G FORM-2, UNS-N05500. COLD DRAWN/HOT FINISHED, ANNEALED & AGE HARDENED. SELF LOCKING IAW MIL-DTL-18240F AMEND-1 TYPE "N" PELLET. MARKINGS OF A MINIMUM OF 6 DOTS (APPROX .032 DIA) RAISED OR DEPRESSED (APPROX .010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY) Ref: 83044012 U/I: Each QTY: 72 UNIT PRICE__________ TOTAL PRICE_____________ 0008 0.875-9UNC-3A X 3.500" LONG SOCKET HEAD CAPSCREW IAW FF-S-86E, TY-6. MATERIAL TO BE NICKEL COPPER ALLUMINUM ALLOY IAW QQ-N-286G, CLASS-A, ANNEALED AND AGE HARDENED. Ref: 83054001/4002 U/I: Each QTY: 12 UNIT PRICE__________ TOTAL PRICE_____________ 0009 SOCKET HEAD CAPSCREWS, 1-8UNRC-3A X 3" LONG. FF-S-86E(4) TYPE-VI. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, ANNEALED (HF/CD) & AGE HARDENED. Ref: 83134021 U/I: Each QTY: 552 UNIT PRICE__________ TOTAL PRICE_____________ 0010 SOCKET HEAD SELF-LOCKING CAPSCREWS, 1-8UNRC-3A X 2-1/2" LONG. FF-S-86E(4) TYPE-VI. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, ANNEALED (HF/CD) & AGE HARDENED. SELF-LOCKING IAW MIL-DTL-18240F(1) TYPE "N". MARKINGS OF A MINIMUM OF 6 DOTS (APPROX.032" DIA) RAISED OR DEPRESSED (APPROX .010") SHALL BE PLACED ON THE HEAD OF THE FASTENERS (TOP PREFERRED, SIDE LOCATION IF NECESSARY). Ref: 83134022 U/I: Each QTY: 86 UNIT PRICE__________ TOTAL PRICE_____________ 0011 FLAT COUNTERSUNK 82 DEGREE SOCKET HEAD CAPSCREW, 5/8-11UNRC-3A X 2-1/2" LONG. FF-S-86E AMEND-4 TYPE-IV. MATERIAL TO BE NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G FORM-2, ANNEALED (HOT FINISHED OR COLD DRAWN) & AGE HARDENED. Ref: 90294011 U/I: Each QTY: 22 UNIT PRICE__________ TOTAL PRICE_____________ 0012 Data associated with CLIN 0001 tough CLIN 0011 See exhibit "A" tough "K" Seq A001 tough K001: CDRL DI-MISC-81356A (Certification of Compliance) See exhibit "A" tough "K" Seq A002 tough K002: CDRL DI-MISC-80678 (Certification/Data Report) U/I: Set QTY: 1 UNIT PRICE__________ TOTAL PRICE_____________ 52.204-7 System for Award Management 52.204-13, SAM Maintenance 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations- Representation 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.211-17, Delivery of Excess Quantities 52.211-9014 Contractor Retention of Traceability Documentation 52.211-9020 Time of Delivery-Accelerated Delivery 52.212-1, Instructions to Offerors 52.212-3 Alt I Instructions to Offerors Evaluation Offeror Reps and Certs 52.212-4, Contract Terms and Conditions - Commercial Items 52.215-9023, Reverse Auction 52.219-9004 Small Business Program Representations 52.222-22 Previous Contracts & Compliance Reports 52.222-25 Affirmative Action Compliance 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran - Reps and Certs 52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.246-9039 Removal of Government Identification from Non Accepted Supplies 52.247-34, F.O.B-Destination 52.247-9012, Requirements for Treatment of Wood Packaging Material 52.252-1, Solicitation Provisions Incorporated by Reference 52.252-2, Clauses Incorporated by Reference 52.252-6, Authorized Deviations in Clauses 52.253-1, Computer Generated Forms 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.204-7003. Control of Government Personnel Work Product 252.204-7008 DEV Compliance With Safeguarding Covered Defense Information Controls 252.223-7008 Prohibition of Hexavalent Comium 252.225-7001 Buy American Act & Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.204-10 Reporting Executive Compensation and First Tier Subcontract Awards, 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation, 52.209-6 Protecting the Government's Interest When Subcontracting with Debarred, Suspended, or Proposed for Debarment, 52.219-6 Notice of Total Small Business Set-Aside, 52.219-28 Post Award Small Business Program Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans, 52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-37 Employment Reports on Disabled Veterans 52.222-50 Combating Trafficking in Persons, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging Contractor Policies to Ban Test Messaging While Driving, 52.225-13 Restrictions on Certain Foreign Purchases. Additional contract terms and conditions applicable to this procurement are: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information Deviation 2016 O0001) DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors DFARS 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability DFARS 252.244-7000 Subcontracts for Commercial Items DFARS 252.247-7023 Transportation of Supplies By Sea Local Clauses: YM3 A1: Additional Information YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C524: Materials and Certification Requirements for Controlled Industrial Material YM3 C528: Specification Changes YM3 D2: Marking of Shipments YM3 D4: Preparation for Delivery (Commercially Packaged Items) YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 F500: Consignment Instructions for Deliveries to Portsmouth Naval Shipyard This announcement will close at 3:00 PM on May 1, 2019. The Point of Contact for this solicitation is Robert Dowdle who can be reached at 207-438-4504 or email robert.dowdle@navy.mil. [A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may submit a quote which shall be considered by the agency. 52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of price, technically acceptable low bids and past performance. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer - Manufacturer's Name, Location and Business Size must be provided. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. SPMYM3-19-Q-5039 Defense Logistics Agency Land and Maritime
4/18/19, 3:05 PM