SEE CORRECTIONS BELOW
Added: Jun 13, 2016 9:19 am This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with 13 of the Federal Acquisition Regulations (FAR) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is SPMYM1-16-Q-0082 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Circular 2005-88. This notice incorporates provisions and clauses in effect tough Federal Acquisition Circular (FAC) 2005-88 effective 16 May 2016 and Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20160325 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2016-06. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.milThe associated North American Industrial Classification System (NAICS) code for this procurement is 332710 Machine Shops. This solicitation is 100% set-aside for Small Business concerns and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-06-24 09:00 AM Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Portsmouth, Virginia 23709.The DLA Maritime Norfolk, Contracting Division, Portsmouth, Virginia requires the following items, 1. LI 001: Manufacture and certify Virginia Class Weapons Cradle Weight Test Assembly.References:a) NAVSEA DWG 5032448 Rev HContractor Responsibilities: (Contractor shall use the specified revisions of technical documents. Arbitrary use of the latest revision available is not allowed)Contractor shall provide the following services:1. Fabricate Assembly 570 of Reference A. Combine parts into applicable assemblies as listed. All general notes of Reference A apply.2. Inspect and test in accordance with general notes of Reference A3. Provide NNSY with written records of paragraph 2 when requested.4. Except as otherwise specified, Contractor to provide all tools and materials necessary to support fabrication and testing.5. Ship the completed materials to NNSY upon completion.6. Period of Performance: Completed equipment is needed by 1 August 2016NNSY Responsibilities:1. Provide copies of any necessary drawings or references.2. If needed, provide a Combat Systems Code 292 Representative to verify paragraph 2 is completed.3. Technical POC will be Steve Brashears (757-485-6253), D.J. Voldstad (757-396-7574), or Jim Cobb (757-396-4660)Priority Assembly PC Description QTY1 525 NOSE PIECE TEST ARRANGEMENT 11 525 101 21" D WOOD AND TEST SHAPE 11 525 102 TEST SHAPE, 21" D WOOD BELLY BAND 11 525 104 TEST STAND NOSE PIECE 11 525 105 STRONGBACK 12 566 PADEYE, CRADLE LIFT TEST ASSEMBLY 12 567 PADEYE, POSITIONING LIFT TEST ASSEMBLY 12 568 PADEYE, TEMPORARY TEST ASSEMBLY 12 569 PADEYE, EMERGENCY TEST ASSEMBLY 12 232 PADEYE TEST UPPER ASSEMBLY 12 233 PADEYE TEST LOWER ASSEMBLY 12 234 CONNECTING LINK, LIFTING 22 235 CONNECTING LINK, POSITIONING 22 236 CONNECTING LINK, LONG TEMPORARY 12 237 CONNECTING LINK, SHORT TEMPORARY 12 238 CONNECTING LINK, EMERGENCY 23 565 CRADLE LASHING BANDS TEST 13 565 231 CRADLE LASHING BANDS, HALF RING 24 547 POWER LOADING POLE TEST ARRANGEMENT 14 547 172 MK 48 TORP LDG ADAPTER (TENSION) 14 547 173 MK 48 TORP LDG ADAPTER (COMP) 14 547 174 MK 48 TEST ADAPTER TEST 15 518 228 ADAPTER, TEST FIXTURE CRADLE LASHING BAND 26 14 TEST PADEYE 16 159 BUTTON TEST ADAPTER 26 202 STRONG BACK, 25" LG X 10,500# CAPACITY 16 205 WEAPONS POSITIONING CABLE MECH TEST ADAPTER 26 214 BUTTON TEST ADAPTER (TENSION) 26 218 CABLE TEST ADAPTER 26 219 POST FIXTURE 26 228 TEST PIXTURE CRADLE LASHING BAND ADAPTER 26 229 STRONG BACK TEST FIXTURE 16 239 NOSE PIECE TEST STAND LOWER ADAPTER 16 240 NOSE PIECE TEST STAND UPPER ADAPTER 16 242 RAMMER TEST FIXTURE 16 243 BRIDLE PULL TEST FIXTURE (SHEET 154) 16 244 CHAIN HOIST TEST FIXTURE (SHEET 155) 16 245 RESTRAINING STRAP TEST FIXTURE 16 246 WEAPON RESTRAINING POST 26 247 CRADLE RESTRAINING POST 26 248 TEMPORARY LASHING STRAP TEST FIXTURE 16 249 PREVENTER STRAP TEST ADAPTER 26 250 PREVENTER STRAP TEST ADAPTER 2 ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** Although this requirement is set-aside for all Small Businesses (SBs), preference will be given to The Awardee will still need to be lowest-price-technically-acceptable. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. ALL REGISTRATION MUST BE "ACTIVE" AT TIME OF AWARD. NO EXCEPTIONS WILL BE MADE. Award will be based on the Lowest-Price-Technically Acceptable quote. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award. SPMYM1-16-Q-0082 Defense Logistics Agency Land and Maritime
Award Notice 1/2 6/13/16, 9:19 AM SERVICE/ MATERIAL
Added: Jul 28, 2016 6:49 am The Defense Logistics Agency, DLA Maritime Norfolk Naval Shipyard Contracting Division, intends to negotiate a firm fixed price contract to procure services, material, repair and testing of a mechanical seal kit for #1, #2, #3 and #4 MCWP on a Sole Source Basis with JOHN CRANE INC. located at 6400 Oakton St. Morton, Grove, IL for a service/Material. The North American Industry Classification System Code is 333911, Pump and pumping equipment, power and hand pumps. The contract line item (CLIN) is as follows. CLIN 0001: 1 EA SERVICE/MATERIAL REPAIR/TESTING SHIPBOARD, PROVIDE MECHANICAL SEAL KIT FOR #1 MCWP PART # M32566 CLIN 0002: 1 EA SERVICE/MATERIAL REPAIR/TESTING SHIPBOARD, PROVIDE MECHANICAL SEAL KIT FOR #2 MCWP PART # M32566 CLIN 0003 1EA SERVICE/MATERIAL REPAIR/TESTING SHIPBOARD, PROVIDE MECHANICAL SEAL KIT FOR #3 MCWP PART # M32566 CLIN 0004: 1 EA SERVICE/MATERIAL REPAIR/TESTING SHIPBOARD, PROVIDE MECHANICAL SEAL KIT FOR #4 MCWP PART # M32566 This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.1, Simplified Acquisition Procedures. The solicitation number is SPMYM1-16-Q-0082 and it will be posted on or around 28July 2016. Quotes are due by 2:00 pm EST on 02 August 2016 and may be faxed to the attention of Nakia E. Gregory at fax number 757-396-9895 or emailed to her at Nakia.gregory@navy.mil. Please make sure that the solicitation number (SPMYM1-16-Q-0082) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://www.neco.navy.mil (Navy Electronic Commerce Online) or at https://www.fbo.gov (Federal Business Opportunities). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency. SPMYM1-16-Q-0082 Defense Logistics Agency Land and Maritime
Award Notice 2/2 7/28/16, 6:49 AM