Purchase Order SPE4A622V227F
Award Date
4/14/22
Potential Completion Date
9/29/22
Potential Value
$2.4K
Federal Agency
Aviation
Awardee
CTN Machining
Ultimate Awardee
Not listed
NAICS Category
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
PSC Category
5305 - Screws
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
San Jose, CA 95111, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
8
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a $1,080.00 firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) Aviation to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. CTN Machining will provide the DLA with a variety of machined components and standard hardware items, such as spacers, sleeves, bushings, nuts, washers, pins, couplings, screws, valves, and adapters. These parts support the DLA's mission of managing the global supply chain for the U.S. military....
This federal contract award from the Defense Logistics Agency (DLA) is a purchase order to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The $2,240 firm-fixed-price contract is for the delivery of protective plugs (NSN 8510587434) to support the DLA's Land and Maritime mission. CTN Machining has held several single-award Indefinite Delivery Contracts (IDCs) with the DLA, valued up to $250,000 each, for the supply of machined components such as...
This federal contract award is for the delivery of machined components and hardware, such as pins, spacers, and adapters, to the U.S. Department of Defense. The prime contractor is CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The award, valued at $1,050, is a firm-fixed-price purchase order placed by the Defense Logistics Agency (DLA), specifically the Aviation division. The contract does not have a set-aside designation, indicating that CTN...
This federal contract award, valued at $1,523.75, was issued by the Defense Logistics Agency (DLA) to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The contract is a firm-fixed-price purchase order for the delivery of various machined components, including needle valves, to support the maintenance and repair of military aircraft, ground vehicles, and equipment. CTN Machining is an experienced government contractor, having been registered to receive...
This is a firm fixed-price purchase order contract awarded to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The contract, valued at $1,800.00, was awarded by the Defense Logistics Agency (DLA) Land and Maritime division for the supply of machined components and hardware, such as spacers, sleeves, bushings, nuts, washers, and other parts used in the maintenance and repair of military aircraft, ground vehicles, and equipment. The contract has an...
This federal contract award was made by the Defense Logistics Agency (DLA), a component of the U.S. Department of Defense, to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The $1,412.50 firm-fixed-price purchase order is for the supply of machined components and hardware, such as caps and pipes, to support the maintenance and repair of military aircraft, ground vehicles, and equipment. CTN Machining is a prime contractor that has held several...
This federal contract award was made by the Defense Logistics Agency (DLA) to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The contract is a firm-fixed-price purchase order for the supply of a specific machined component, a bushing/sleeve, with a ceiling value of $1,216.00. The award has an ultimate completion date of September 13, 2024. CTN Machining holds several single-award Indefinite Delivery Contracts (IDCs) with the DLA, which allow the...
This is a firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) to CTN Machining, a minority-owned, non-profit small business based in San Jose, California. The contract, valued at $1,200.00, is for the delivery of a disk valve (NSN 8510789603). CTN Machining has been a prime contractor for the DLA since 2009, providing a variety of machined components and hardware to support the readiness of U.S. military forces. The contract does not have a set-aside designation,...
This federal contract award, valued at $1,577.85, was issued by the Defense Logistics Agency (DLA) to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The contract is for the delivery of 8510912917 - WASHER, RECESSED, a machined component used in military equipment maintenance and readiness. CTN Machining has established itself as a reliable supplier of precision-manufactured industrial components to the DLA, securing numerous firm fixed-price...
This federal contract award, valued at $1,501.00, was issued by the Defense Logistics Agency (DLA) Land and Maritime division to CTN Machining, a minority-owned, non-profit small business located in San Jose, California. The contract is for the delivery of a straight adapter (National Stock Number 8510575900) and is a firm-fixed-price purchase order with a completion date of May 20, 2024. CTN Machining is an experienced government contractor, having held several single-award Indefinite...