Purchase Order SPE4A026P0397
Award Date 11/25/25
Potential Completion Date 12/15/25
Potential Value $1K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not listed
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Jim Thorpe, PA, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- BTM Inc., doing business as Beers Tooling And Machining, was awarded a purchase order by the Defense Logistics Agency's Aviation division on September 17, 2025, to manufacture a bearing sleeve component. The contract carries a ceiling value of $10,292.00 under a firm fixed-price arrangement, with an ultimate completion date of February 17, 2026. The work will be performed at the company's facility in Jim Thorpe, Pennsylvania. This award includes no set-aside designation and represents the...
- The U.S. Defense Logistics Agency (DLA) Aviation division awarded a purchase order to BTM Inc., doing business as Beers Tooling And Machining, for the manufacture of a sleeve bearing component. The contract, valued at $4,342, was issued on August 25, 2025, with an ultimate completion date of December 23, 2025. BTM Inc., a Women-Owned Small Business (WOSB) based in Jim Thorpe, Pennsylvania, will perform all work at its facility in Jim Thorpe. No set-aside designation was applied to this contract....
- BTM Inc., doing business as Beers Tooling And Machining, was awarded a firm fixed-price purchase order by the Department of Defense Aviation division on November 13, 2025, for the manufacture of a bearing sleeve component. The contract, valued at $1,899.00 with no small business set-aside designation, is scheduled for completion by April 13, 2026. BTM Inc., a women-owned small business headquartered in Jim Thorpe, Pennsylvania, will perform the work at its facility in the same location. The...
- BTM Inc., doing business as Beers Tooling And Machining, was awarded a Total Small Business set-aside purchase order by the Defense Logistics Agency (DLA) Aviation division on May 6, 2025, with a ceiling value of $9,652.00. The contract calls for the manufacture of sleeve bushings, precision mechanical components critical to defense logistics and equipment maintenance operations. As a Women-Owned Small Business certified by the Small Business Administration (SBA), BTM Inc. will perform the...
- The U.S. Department of Defense Aviation division awarded a $2,024 firm fixed-price purchase order to BTM Inc., doing business as Beers Tooling and Machining, on November 24, 2025, for the manufacture of a bearing sleeve component. The contract, which carries no set-aside designation, is scheduled for ultimate completion by March 24, 2026, and represents a continuation of the department's reliance on precision machining capabilities to support defense logistics and equipment maintenance...
- The U.S. Defense Logistics Agency (DLA) Aviation division awarded a purchase order to BTM Inc., doing business as Beers Tooling And Machining, on September 9, 2025, for the supply of a bearing sleeve component (NIIN 8511623007). The contract carries a ceiling value of $2,156.00 and is structured as a firm fixed-price purchase order with an ultimate completion date of February 6, 2026. The award was made without a set-aside designation. BTM Inc., a women-owned small business based in Jim...
- BTM Inc., doing business as Beers Tooling And Machining, was awarded a $6,970 firm fixed-price purchase order by the Defense Logistics Agency Aviation division on July 29, 2025, for the manufacture of bushings and sleeves. The contract, which carries no set-aside designation, is scheduled for completion by December 26, 2025, and will be performed at the contractor's facility in Jim Thorpe, Pennsylvania. BTM Inc. is a Women-Owned Small Business certified by the Small Business Administration and...
- BTM Inc., operating as Beers Tooling And Machining, was awarded a purchase order on June 20, 2025, by the Defense Logistics Agency's Land and Maritime division for the manufacture of a shouldered shaft component. The contract, valued at $2,592, carries a firm fixed-price arrangement with no set-aside designation and an ultimate completion date of November 17, 2025. BTM Inc., a women-owned small business headquartered in Jim Thorpe, Pennsylvania, will perform all work at its facility in the...
- BTM Inc., operating as Beers Tooling and Machining, was awarded a $4,408 firm fixed-price purchase order by the Defense Logistics Agency (DLA) Aviation division on April 30, 2025. The contract covers the procurement of shouldered studs and is scheduled for completion by May 30, 2025. BTM Inc., a woman-owned small business certified by the Small Business Administration and based in Jim Thorpe, Pennsylvania, was selected as the prime contractor. This award was made without a set-aside designation....
- The U.S. Defense Logistics Agency (DLA), Land and Maritime division, awarded a $1,102.00 purchase order to BTM Inc., doing business as Beers Tooling And Machining, for the manufacture of a shaft lock component (part number 8511532809). BTM Inc., a Women-Owned Small Business (WOSB) based in Jim Thorpe, Pennsylvania, was selected as the prime contractor with no set-aside designation applied to this award. The contract operates under firm fixed price terms with an ultimate completion date of...