Relocation of Additive Manufacturing Centers
The Naval Air Warfare Center Aircraft Division Lakehurst, NJ intends to issue a solicitation on a limited competition basis to the authorized distributors of Stratasys, Inc. (CAGE 1GKB4) for the disconnecting, relocating, and reconnecting of the below equipment owned by Fleet Readiness Center Southeast (FRCSE): Stratasys Fortus 400 System (S/N T2962) Stratasys Fortus 450 System (S/N K10375) Stratasys Fortus 900 System (S/N L1101) Clean Station XL HP 4200 System (S/N SG84334001, S/N SG8BT36002, S/N SG93K35006, S/N SG93N35008) The Government intends to procure the above items under the authority of 10 USC 2304 (c) (1), FAR 6.302-1, Only one responsible source and no other supplies or services will satisfy agency requirements. A determination by the Government, not to open the requirement to competition based upon the response to this notice, is solely within the discretion of the Government. Responses must be received within fifteen (15) days of publication of this notice. N6833520Q0106 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
3/24/20, 4:06 PM Approach Track for Aircraft Launch System
Naval Air Warfare Command, Aircraft Division, Electromagnetic Aircraft Launch System (EMALS) program's intent is to procure quantity four (4) Approach Track Part Number 622017-7, associated reports, and an Integrated Master Schedule in support of CVN 79 Required-In-Yard. The awarded contract will be a Small Business Set Aside competition. This is based on previous successful competitions that were conducted for this item among small businesses. This pre-solicitation synopsis is opened to identify potential qualified small businesses, verify 2345's and capabilities, and provide drawings to the small businesses for developing a quote. There no proprietary hardware or software related to the Approach Track. The Government owns the technical drawing that will be included in the procurement package along with its Statement of Work and related CDRLs. The following information will be sent to interested parties: 1. Approach Track Drawing #622017 rev J 2. Statement Of Work/CDRLs - Approach Track dated 15 April 2019 3. Material and Process Requirement (MPR) 1222 Much of that information is export controlled. The Government has Unlimited Rights owns rights to the complete package. To qualify to receive the procurement package, potential contractors need to send a copy of their 2345, Statement of Capabilities highlighting experience with the following standards, Interpreting drawings ASME Y14.5M-1982 Metal Stamp work IAW MIL-STD-130 Experience with SAE AMS-S-6090, FED-STD-H28/20 Welding and Inspection in accordance with NAVSEA S9074-AR-GIB -010/278, CLASS M-1, Category B Welding Joint Configuration in Accordance with MIL STD-22 The above information is taken from the drawing and specifications. If a potential alternative specification is thought in your (Vendor’s) opinion superior to the ones listed above, when submitting your capability statement, make that recommendation. Although not a guarantee that it will be acceptable, the final decision is in the sole discretion of the NAWCAD engineer’s opinion. That decision will be made prior to distributing the actual drawing and all potential recipients of information will have the same information on which to build their quotation. After your capabilities are reviewed, if selected after confirming that the potential vendors had a valid Military Critical Technical Data Agreement (Form 2345) each potential contractor will receive the Approach Track drawing to provide a quotation. All submissions will be reviewed by 8 January, and RFQ packages will be sent out to addressee on the 2345 for quotation purposes. All proposals will be due by 30 January, with award to the Lowest Price from a responsible offeror. N68335-20-Q-0106 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
12/18/19, 3:53 PM EMALS Approach Track
Awarded contract N6833520P0154 to THE ENTWISTLE COMPANY [DUNS: 001198647],Bigelow St,Hudson MA 01749-2697 for 102340.8 on 2020-03-05. N6833520Q0106 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
3/5/20, 8:00 AM EMALS Approach Track
No Comment Required Awarded contract N6833520P0154 to ENTWISTLE COMPANY, THE for 102340.80 on 2020-03-06. 1011478_Unison_Reverse_Auction Department of the Navy Naval Air Systems Command Naval Air Warfare Center
3/5/20, 8:35 AM EMALS Approach Track
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6833520Q0106 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Circular 2020-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees. This requirement is a Small Business set-aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2020-02-07 14:30:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Joint Base MDL, NJ 08733The NAWC-AD Lakehurst requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: ALRE Launcher Approach Track - This is a procurement requesting only qualified offerors to provide quotations. All of the documents associated with this item are export-controlled documents. If you are interested in providing a quotation, send a copy of your current DD2345 to Robert.battaglia@navy.mil by 22 January 2020. All documents will be delivered to the signer of the DD2345 via DoD Safe, secure document delivery. No questions regarding the Drawings or Statement of Work/CDRLS will be accepted after 24 January 2020. All quotations will be due by 07 February 2020. There will be no extensions for this requirement. Compliance with the following Commercial, Military Standards and information will be required for the successful Contractor. If you not familiar with these requirements, please do not provide a quote. ASME Y14.5M-1982 Dimensioning and Tolerances * ASME B1.20.1 and ASME Y14.6 Pipe Tead Dimensions ASTM E1444 Magnetic Particle Inspections MIL STD 22 Welding Joints and Procedures MIL STD 130 Metal stamping and Marking MIL STD 2035 Magnetic Inspection Requirements MIPR-1222 Thickness after coating requirements NAVSEA S9074-AR-GIB-010/278 CLASS M-1 Welding Procedure. NAVSEA S9074-AQ-GIB-010/248 Evidence of Welder Performance Qualification SAE AMS-S-6090 Carburize requirement Contract Requirements Provide Integrated Master Schedule Ability to meet the requirements based on the Drawings Welder Certifications after award. The Approach Tracks have a mandatory completion date by 1 December 2020, 4, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction tough Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.Bid MUST be good for 30 calendar days after close of Buy.Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.52.204-1 Approval of Contract. (Dec 1989) 52.204-12 Unique Entity Identifier Maintenance. (Oct 2016) 52.204-13 System for Award Management Maintenance. (Oct 2018) 52.204-19 Incorporation by Reference of Representations and Certifications. (Dec 2014) 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. (Oct 2018) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. (Nov 2015) 52.211-8 Time of Delivery. (June 1997) 52.211-15 Defense Priority and Allocation Requirements (Apr 2008) 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.236-5 Material and Workmanship (Apr 1984) 52.242-13 Bankruptcy (July 1995) 52.242-15 Stop-Work Order (Aug 1989) 52.242-17 Government Delay of Work (Apr 1984) 52.243-1 Changes-Fixed-Price (Aug 1987) 52.247-48 F.o.b. Destination-Evidence of Shipment (Feb 1999)252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.243-7001 Pricing of Contract Modifications (DEC 1991) 252.225-7036 Buy American-Free Trade Agreements-Balance of Payments Program (NOV 2014) 252.247-7023 Transportation of Supplies by Sea (FEB 2019) 252.204-7012 Safeguarding Covered Defense Information and Cyber Security Incident Information (OCT 2016) 252.225-7012 Preference for Certain Domestic Commodities (DEC 2017) 252.225-7048 Export Controlled Items (JUN 2013) 252.232-7006 Wide Area Workflow Payment Instructions (DEC 2018)5252.201-9500 TECHNICAL POINT OF CONTACT (TPOC)(NAVAIR)(SEP 2012) 5252.242-9511 CONTRACT ADMINISTRATION DATA (NAVAIR)(NOV 2017) 5252.243-9505 ENGINEERING CHANGES (NAVAIR) (OCT 2005) 5252.246-9512 INSPECTION AND ACCEPTANCE (NAVAIR) (OCT 2005) 5252.246-9514 INSPECTION AND ACCEPTANCE OF TECHNICAL DATA AND INFORMATION (NAVAIR) (FEB 1995) The full test is attached to this solicitation. The Fill In Text will be completed for award. N6833520Q0106 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
1/23/20, 10:35 AM