Purchase Order N6660424P0169
- Not listed
- This is a firm-fixed price purchase order contract awarded by the Naval Sea Systems Command (NAVSEA) to Acutronic USA Inc., a foreign-owned, for-profit manufacturer of precision motion simulators based in Pittsburgh, Pennsylvania. The contract is for annual onsite calibration services, including troubleshooting of existing systems, for the Naval Undersea Warfare Center (NUWC) Division Keyport, located in Keyport, Washington. The contract has a ceiling value of $66,910.00 and a performance period...
- Standard Calibrations Inc., a small business specializing in NIST-traceable equipment calibration and repair services based in Chesapeake, Virginia, has been awarded a $6,258.75 purchase order by the Naval Supply Systems Command for a torque motor component. The award, announced on November 3, 2025, with an ultimate completion date of March 23, 2026, represents a firm fixed-price contract with no small business set-aside designation. The procurement originated from a pre-solicitation notice...
- Omni-Tech Calibration Services, Inc., a small business concern, was awarded a firm fixed price purchase order by Naval Sea Systems Command (NAVSEA) on April 7, 2023, for onsite calibration and emergency repair services with a ceiling value of approximately $229k. The contract encompasses calibration and support services on a base and options structure, with performance to be completed in Fenton, Michigan by April 6, 2028. This award was set aside exclusively for small businesses and resulted...
- The Naval Sea Systems Command (NAVSEA) awarded a $60,864 firm fixed-price purchase order to Fedsatiz LIMITED Co, a women-owned small business based in Sugar Land, Texas, for the procurement of twelve Kawasaki hydraulic motors (Part Number HMB030P21PL566). These motors are critical replacement components for towed array Combat Deck Unit overhauls at Naval Undersea Warfare Center, Division Newport in Newport, Rhode Island. The contract is designated as a total small business set-aside and...
- This is a firm fixed-price purchase order contract awarded by the Naval Sea Systems Command (NAVSEA), a component of the U.S. Department of the Navy, to Standard Calibrations Inc., a small business based in Chesapeake, Virginia. The contract, valued at $1,512, is to provide evaluation, repair, and calibration services. The contract has a completion date of June 10, 2024 and was awarded on May 15, 2024. It is set aside for total small business participation. Standard Calibrations Inc. is a...
- This is a firm-fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA) to Keysight Technologies Inc. for calibration services on 10 Keysight instruments. The contract has a ceiling value of $29,427.00 and a period of performance from July 15, 2024 to December 31, 2024. The contract is not set aside for any particular business size or socioeconomic category. The original solicitation was a sources sought notice, where NAVSEA was conducting market research to determine the...
- Standard Calibrations Inc., a small business subchapter S corporation based in Chesapeake, Virginia, was awarded a $62,816 firm fixed-price purchase order by the Naval Supply Systems Command for motional transducers. The contract, awarded on March 17, 2025, carries an ultimate completion date of March 17, 2026, with no small business set-aside designation applied. The motional transducers supplied under this award support the Navy's maintenance, repair, and overhaul operations across its fleet...
- The Naval Sea Systems Command awarded a $15,102 firm fixed-price purchase order to Standard Calibrations Inc. for calibration services. The contract, designated as a total small business set-aside, was awarded on September 2, 2020, with an ultimate completion date of September 30, 2020. Standard Calibrations Inc., a small business subchapter S corporation based in Chesapeake, Virginia, specializes in National Institute of Standards and Technology (NIST)-traceable equipment calibration, repair,...
- This is a firm fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, to Standard Calibrations Inc., a small business subchapter S corporation located in Chesapeake, Virginia. The contract has a ceiling value of $1,273.00 and a completion date of January 2, 2024. The contract is for the provision of NIST-traceable equipment calibration, repair, and configuration services to support maintenance, repair, and overhaul programs for federal agencies,...
- This is a $124,443.04 firm fixed-price purchase order awarded by the Naval Air Warfare Center (part of the U.S. Navy) to Newport Corporation, a subsidiary of MKS Instruments Inc. The contract is for the delivery of calibration standards and ancillary equipment, including cables, stages, controllers, and related hardware, to the Naval Air Warfare Center in Patuxent River, Maryland by May 1, 2024. The original solicitation was issued by the Naval Air Systems Command and was not set aside for small...
The Naval Sea Systems Command awarded a $27,150.03 firm fixed-price purchase order to KES Machine LLC, a small business, on January 23, 2024, for on-site calibration services of rotary stepper motors at the Naval Undersea Warfare Center, Division Newport in Newport, Rhode Island. The contract, which is set aside 100% for small businesses, covers calibration of three rotary stepper motors located at the Acoustic Pressure Tank Facility and Open Tank Facility through October 30, 2026. The calibration services will utilize laser interferometry to measure motor positions through 360 degrees of rotation and will support the center's test and evaluation activities. The base contract period requires calibration of one motor at the Acoustic Pressure Tank Facility and two motors at the Open Tank Facility, with performance scheduled for February 5-16, 2024. The contract structure includes two option years for additional calibration services at both facilities in years two and three. The award was made following a competitive small business solicitation posted on January 5, 2024, with quotes due January 16, 2024, evaluated on price and technical qualifications under NAICS code 541330 (Engineering Services).
Name | Description | Solicitation Number | FederalAgency | Type | PostedDate |
|---|---|---|---|---|---|
Rotary Stepper Motor On-site Calibration Services | N6660424Q0169 | Department of the Navy Naval Sea Systems Command | Solicitation 1/1 | 1/5/24, 11:57 AM |
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| P00002 | Exercise an Option | $9.1k | 1/7/26 | |
| P00001 | Exercise an Option | $9.1k | 1/14/25 | |
| Not listed | Not listed | $9.1k | 1/23/24 |