MK170 Seals
MARKET SURVEY - Request for Information (RFI): The Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD) issues this Sources Sought Notice as a means of conducting market research to identify interested parties for this requirement. This Sources Sought Notice is focused on identifying capabilities in the market place and resources to support this requirement, as well as obtaining related technical information for the procurement of the items listed below. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 339991. The envisioned item anticipated to be procured from a contractor as a result of a potential future solicitation is identified below. MK170 Seals, P/N 6692957-9, quantity 1500 Proposed delivery schedule: 1. Initial delivery of 500, eight (8) weeks ARO. 2. Delivery of 100 seals per week, continually until complete. First Article Inspection/First Article Testing (FAI/FAT) may be required for this procurement. The technical data package (drawings) contain information that is export controlled. Only those companies that have completed DD Form 2345 and are certified under the Defense Logistics Agency (DLA) Joint Certification Program (JCP) in an active status are authorized to receive the package (http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx). Vendor also must be currently registered in the System for Award Manage (SAM) and not currently excluded or debarred, and are not currently delinquent on any federal debt (https://www.sam.gov/). Requested Information: The Navy requests the following information from parties interested in responding to this Sources Sought Notice: a. Company Name, Address, CAGE Code, DUNS. b. Response Point of Contact name, telephone number, email address, and website URL. c. Tailored Information describing company capabilities, resources, experience, and product lines that demonstrate an ability to provide the items described above. 1) Provide evidence of having manufactured parts using either a transfer mold or a compression mold for bonding Nitrile rubber compound (ASTM D2000-92 M6BG910 B14 EO14 EO34 or MIL-P-83461) to surface of material 316 or 316L Stainless Steel. 2) Provide evidence of having an effective procedure for preparing 316 Stainless Steel for bonding process. 3) Provide evidence of having performed adhesion test IAW ASTM-D429, method B on a sample part where Nitrile rubber compound (ASTM D2000-92 M6BG910 B14 EO14 EO34 or MIL-P-83461) was bonded to surface of material 316 or 316L Stainless Steel. 4) Provide evidence of having performed compression test on part made of rubber. d. Business Size, Special Size Sub-Category, and Type of Ownership for the Company. e. Rough Order of Magnitude (ROM) cost estimate to provide the items in the quantity described above. f. Feedback and questions regarding the feasibility or challenges for providing the items described above. g. Information regarding the commerciality of the items described above. Information herein is based on the best information available at the time of publication, is subject to revision, and is not binding upon the Government. The government will evaluate market information to ascertain potential market capacity to: a. Provide supplies consistent in scope and scale with those described in this notice and otherwise anticipate b. Secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements. Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses or procured through full and open competition, and multiple awards may be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services should respond to this Sources Sought Notice. Responses are required to be received no later than 5:00 PM Pacific Time on 27 October 2018. Responses should be provided in formats compatible with Microsoft Office 2010 for Windows or Adobe Portable Document Format (pdf). Receipt of responses will be acknowledged. Responses will not be returned. Following the date of response submission, the Government may contact respondents to seek clarification of submitted information. All responses under this Sources Sought Notice shall be submitted to Rachel T. Smith at rachel.t.smith@navy.mil. If you have any questions concerning this opportunity, please contact: Rachel T. Smith at rachel.t.smith@navy.mil. The Government WILL NOT PAY for any information received in response to the Sources Sought Notice nor will the Government compensate respondents for any cost incurred in developing information for, participating in meetings with, or engaging in discussions with the Government. Proprietary and Limited Distribution: It is incumbent upon parties providing responses to this Sources Sought Notice to identify all data contained within that is proprietary or has limited distribution requirements. All information marked as proprietary information will be safeguarded to prevent disclosures to non-governmental personnel and entities. There is no solicitation at the current time and NO FUNDING IS AVAILABLE for contractual efforts. This Sources Sought Notice does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the Government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Additionally, any costs incurred by interested companies in response to this announcement will NOT be reimbursed and are NOT considered allowable direct charges to other contracts or tasking. .
N63394-19-T-0005 Department of the Navy Naval Sea Systems Command
10/17/18, 7:04 PM MK170 Seals
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, "Streamlined Procedures for Evaluation and Solicitation for Commercial Items," as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation document will not be issued. This solicitation, N63394-19-T-0005, is a request for quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-101 and Defense Federal Acquisition Regulation Supplement (DFARS) Public Notice (DPN) 20181031. The associated North American Industrial Classification System (NAICS) code for this procurement is 339991, with a small business size standard of 500 employees. This requirement is a competitive Small Business set-aside and only qualified offerors may submit quotes. Material Description: The NSWC PHD is seeking to purchase MK170 Seals. All interested companies shall provide a quotation for the following Supplies IAW appropriate drawings: MK170 Seals, P/N 6692957-9, quantity 500 MK170 Seals, P/N 6692957-9, option quantity 500 MK170 Seals, P/N 6692957-9, option quantity 500 MK170 Seals, P/N 6692957-9, option quantity 500 Proposed delivery schedule: Initial delivery of 500, eight (8) weeks ARO, to be delivered 100 seals per week until complete. The technical data package (drawings) contain information that is export controlled. Only those companies that have completed DD Form 2345 and are certified under the Defense Logistics Agency (DLA) Joint Certification Program (JCP) in an active status are authorized to receive the package (http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx). Vendor also must be currently registered in the System for Award Manage (SAM) and not currently excluded or debarred, and are not currently delinquent on any federal debt (https://www.sam.gov/). (NOTE: The drawings attached to this Solicitation are the same drawings posted with the Sources Sought.) The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/far/ http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://farsite.hill.af.mil/ APPLICABLE SOLICITATION PROVISIONS FAR 52.204-7 System for Award Management. FAR 52.204-16 Commercial and Government Entity Code Reporting. FAR 52.204-17 Ownership or Control of Offeror. FAR 52.204-20 Predecessor of Offeror. FAR 52.204-22 Alternative Line Item Proposal. FAR 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations- Representation. FAR 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. FAR 52.212-1 Instructions to Offerors-Commercial Items. FAR 52.212-2 Evaluation-Commercial Items. FAR 52.219-1 Small Business Program Representations. FAR 52.222-22 Previous Contracts and Compliance Reports. FAR 52.222-46 Evaluation of Compensation for Professional Employees. FAR 52.222-48 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Certification. FAR 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Certification. FAR 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals- Representation. FAR 52.225-18 Place of Manufacture. FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials. DFARS 252.204-7004 Alternate A, System for Award Management. DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. DFARS 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations. FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision. APPLICABLE CONTRAT CLAUSES FAR 52.202-1 Definitions. FAR 52.203-3 Gratuities. FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights. FAR 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. FAR 52.204-13 System for Award Management Maintenance. FAR 52.204-18 Commercial and Government Entity Code Maintenance. FAR 52.204-19 Incorporation by Reference of Representations and Certification. FAR 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab. FAR 52.211-15 Defense Priority and Allocation Requirements. FAR 52.212-4 Contract Terms and Conditions-Commercial Items. FAR 52.217-6 Option for Increased Quantity. FAR 52.232-17 Interest. FAR 52.232-39 Unenforceability of Unauthorized Obligations. FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. FAR 52.233-1 Disputes. FAR 52.234-1 Industrial Resources Developed Under Title III, Defense Production Act. FAR 52.242-13 Bankruptcy. FAR 52.243-1 Changes-Fixed Price. FAR 52.244-6 Subcontracts for Commercial Items. FAR 52.246-1 Contractor Inspection Requirements. FAR 52.246-2 Inspection of Supplies-Fixed-Price. FAR 52.246-16 Responsibility for Supplies. FAR 52.247-34 F.o.b. Destination. FAR 52.249-2 Termination for Convenience of the Government (Fixed-Price) (Short Form)--Alternate I. FAR 52.249-8 Default (Fixed-Price Supply and Service). FAR 52.252-2 Clauses Incorporated by Reference. DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials. DFARS 252.203-7002 Requirements to Inform Employees of Whistleblower Rights. DFARS 252.204-7003 Control of Government Personnel Work Product. DFARS 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information. DFARS 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. DFARS 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. DFARS 252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism. DFARS 252.223-7008 Prohibition of Hexavalent Chromium. DFARS 252.225-7001 Buy American and Balance of Payments Program. DFARS 252.225-7002 Qualifying Country Sources as Subcontractors. DFARS 252.225-7012 Preference for Certain Domestic Commodities. DFARS 252.225-7048 Export-Controlled Items. DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns. DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. DFARS 252.232-7006 Wide Area Workflow Payment Instructions. DFARS 252.232-7010 Levies on Contract Payments. DFARS 252.243-7001 Pricing of Contract Modifications. DFARS 252.244-7000 Subcontracts for Commercial Items. DFARS 252.246-7000 Material Inspection and Receiving Report. DFARS 252.246-7008 Sources of Electronic Parts. DFARS 252.247-7023 Transportation of Supplies by Sea. HQ G-2-0009 Supplemental Instructions Regarding Invoicing (NAVSEA)(APR 2015) The following subparagraphs of FAR 52.212-5 are applicable: FAR 52.203-6 Restrictions on Subcontractor Sales to the Government--Alternate I. FAR 52.203-13 Contractor Code of Business Ethics and Conduct. FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. FAR 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. FAR 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. FAR 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. FAR 52.219-6 Notice of Total Small Business Set-Aside. FAR 52.219-8 Utilization of Small Business Concerns FAR 52.219-14 Limitations on Subcontracting. FAR 52.219-28 Post Award Small Business Program Representation. FAR 52.222-3 Convict Labor. FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies. FAR 52.222-21 Prohibition of Segregated Facilities. FAR 52.222-26 Equal Opportunity. FAR 52.222-35 Equal Opportunity for Veterans. FAR 52.222-36 Equal Opportunity for Workers with Disabilities. FAR 52.222-37 Employment Reports on Veterans. FAR 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. FAR 52.222-50 Combating Trafficking in Persons. FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. FAR 52.225-13 Restrictions on Certain Foreign Purchases. FAR 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. FAR 52.233-3 Protest After Award. FAR 52.233-4 Applicable Law for Breach of Contract Claim. DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM This is not a rated order under the Defense Priorities and Allocations System Place of Delivery: Naval Surface Warfare Center Port Hueneme Division (NSWC PHD) 4363 Missile Way, Building 435 Port Hueneme, CA 93043 INSTRUCTIONS FOR OFFERORS This is a combined synopsis/solicitation for supplies as defined herein. The government intends to award a purchase order as a result of this combined synopsis/solicitation that will include the terms and conditions set forth herein. Offerors must complete annual representations and certifications on-line at http://www.sam.gov/portal in accordance with FAR 52.212-3, "Offerors Representations and Certifications-Commercial Items." If paragraph (j) of the provision is applicable, a written submission is required. Vendor must also be currently registered in the System for Award Manage (SAM). Submission shall be received not later than 5:00PM PDT on 30 November 2018 to Rachel T. Smith at rachel.t.smith@navy.mil. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1. Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the point(s) of contact listed below: Rachel T. Smith rachel.t.smith@navy.mil. Only questions and concerns provided prior to 20 November 2018 will receive a response. Responses to questions and concerns received shall be posted publicly in an amendment to this solicitation. Quotations shall contain the following: (1) Vendor Administrative Information: a. Cage Code: b. Dun & Bradstreet #: c. Tax ID #: d. Special Small Business Sub-Category (if applicable): e. Pricing: Are the items quoted available on a commercial, published, or on-line price listing? If so, please attach to the RFQ response. If internal price listing, please provide the title of your price list with the page number the items are listed on & the date it was established. f. If quoting on a GSA Schedule, please provide Schedule Number and Expiration Date. (2) Price Breakdown. The quote shall include: Item Description, Unit Cost, Quantity, and Subtotal. The Quote shall reflect an all-inclusive price (e.g., includes delivery cost). (3) Statement that the quotes are good for 60 calendar days. EVALUATION Award will be made on the basis of the lowest evaluated price of quotations meeting or exceeding the acceptability factors for non-cost factors (aka, Lowest Priced, Technically Acceptable (LPTA)). The government will evaluate information based on the following evaluation criteria: (1) Price. Total price will be evaluated. (2) Technical Capability. The Offeror's technical capability will be assessed based upon the vendor providing a quotation based on the part numbers provided in this solicitation. Technical capability will receive an "acceptable" or "not acceptable" rating. The Offeror to provide the following: 1. Provide evidence of having manufactured parts using either a transfer mold or a compression mold for bonding Nitrile rubber compound (ASTM D2000-92 M6BG910 B14 EO14 EO34 or MIL-P-83461) to surface of material 316 or 316L Stainless Steel. 2. Provide evidence of having an effective procedure for preparing 316 Stainless Steel for bonding process. 3. Provide evidence of having performed adhesion test IAW ASTM-D429, method B on a sample part where Nitrile rubber compound (ASTM D2000-92 M6BG910 B14 EO14 EO34 or MIL-P-83461) was bonded to surface of material 316 or 316L Stainless Steel. 4. Provide evidence of having performed compression test on part made of rubber..
N63394-19-T-0005 Department of the Navy Naval Sea Systems Command
11/19/18, 8:10 PM