Sideport Shell Door Parts
Added: Sep 11, 2017 1:28 pm This is a COMBINED SYNOPSIS/SOLICITATION for Brand Name or Equal commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on FEDBIZOPPS. This solicitation documents and incorporates provisions and clauses in effect tough FAC 2005-95 and DFARS Publication Notice 20161222. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far/ and http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The NAICS code is 336611 and the Small Business Standard is 1250. This is a competitive, unrestricted action. The Mid-Atlantic Regional Maintenance Center (MARMC) requests responses from qualified sources capable of providing: CLIN 0001 - Swing-Arm Weldment; P/N: J15861060-1; QTY: 2 EACLIN 0002 - Swing-Arm Weldment; P/N: J15861060-2; QTY: 2 EACLIN 0003 - Idler Arm Weldment R.H. ; P/N: J15861060-2; QTY: 2 EACLIN 0004 - Idler Arm Weldment L.H. ; P/N: J15861090-3; QTY: 2 EACLIN 0005 - Bushing: P/N: JM1620-8; QTY: 16 EACLIN 0006 - Door Idler Support Weldment: P/N: J15861080-1; QTY: 4 EACLIN 0007 - Idler Arm Rod Eye; P/N: J15861090-2: QTY: 4 EACLIN 0008 - Bushing: P/N: JM1620-12; QTY: 4 EACLIN 0009 - Top Center Hinge Weldment; P/N: J15861070-2; QTY: 4 EACLIN 0010 - Lower Center Hinge Weldment; P/N: J15861070-1; QTY: 4 EACLIN 0011 - Motor Drive Shaft; P/N: J15862097-PC1; QTY: 8 EACLIN 0012 - Pin, Cotter; P/N: J51402-12-5; QTY: 16 EACLIN 0013 - Roll, Pin; P/N: J51604-16-S316; QTY: 16 EACLIN 0014 - Bearing Holder; P/N: J15862097-PC11; QTY: 8 EACLIN 0015 - Bearing Holder; P/N: J15862097-PC10; QTY: 8 EACLIN 0016 - Counter Balance Valve Door; P/N: J15866012-1; QTY: 8 EACLIN 0017 - Plate Steel; P/N: J15862097-PC16; QTY: 16 EACLIN 0018 - Hinge Cap; P/N: J15862097-PC17; QTY: 8 EACLIN 0019 - Door Guide Assembly; P/N: J15861700-1; QTY: 2 EACLIN 0020 - Cotter Pin: P/N: J51403-16-S; QTY: 4 EA **Note: All parts are reference by Jered, LLC part numbers. Delivery: 05 February 2018 or sooner; Delivery Location: ARO to DLA DISTRIBUTION NORFOLK RMC PROJ, BUNKER HILL TOWAWAY BLDG X136 Norfolk, Virginia 23511. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.202-1 Definitions52.203-3 Gratuities 52.204-7 System for Award Management52.204-13 System for Award Management Maintenance 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014). 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction (Feb 2016)52.211-6 -- Brand Name or Equal52.212-1 Instructions to Offerors - Commercial Items 52.212-3 Offeror Representations and Certifications-Commercial Items), (The offeror has completed the annual representations and certification electronically via the ORCA website at http://orca.bpn.gov .After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference); 52.232-39 Unenforceability of Unauthorized Obligations52.247-34 FOB Destination52.252-1 Solicitation Provisions Incorporated by Reference52.252-2 Clauses Incorporated by Reference52.212-4 Contract Terms and Conditions-Commercial Items; Items Within 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders -Commercial Items), the following clauses apply and are incorporated by reference: 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.233-3 Protest After Award52.233-4 Applicable Law for Breach of Contract Claim52.204-10 Report Executive Compensation and First-Tier Subcontract Awards52.219-6 Notice of Total Small Business Set-Aside52.219-28 Post Award Small Business Program Representation52.222-3 Convict Labor 52.222-19 Child Labor-Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Veterans 52.222-36 Affirmative Action for Workers with Disabilities 52.222-37 Employment Reports on Disabled Veterans52.222-40 Notification of Employee Rights Under the National Labor Relations Act52.222-50 Combating Trafficking in Persons52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving52.225-13 Restriction on Foreign Purchase 52.232-33 Payment by Electronic Funds Transfer - SAM52.232-39 Unenforceability of Unauthorized Obligations52.232-40 Providing Accelerated Payments to Small Business Subcontractors252.203-7000 Requirements Relating To Compensation of Former DoD Officials252.203-7002 Requirement to Inform Employees of Whistleblower Rights252.203-7005 Representation Relating to Compensation of Former DoD Officials252.203-7996 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements- Representation252.203-7997 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements252.204-7003 Control of Government Personnel Work Product252.204-7001 Alt A System for Award Management252.204-7008 Compliance with Safeguarding Covered Defense Information Controls252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (Dec 2015).252.204-7011 Alternative Line Item Structure252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting252.204-7015 Disclosure of Information To Litigation Support Contractors252.209-7991Representation by Corporation Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law - Fiscal Year 2016252.223-7008 Prohibition of Hexavalent Comium 252.225-7000 Buy American Act - Balance of Payments Program Certificate252.225-7001 Buy American Act and Balance of Payments Program252.225-7002 Qualifying Country Sources as Subcontractors252.225-7048 Export-Controlled Items252.232-7003 Electronic Submission of Payment Requests And Receiving Reports252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies On Contract Payments252.244-7000 Subcontracts For Commercial Items And Commercial Components (DoD Contracts)252.247-7023 Transportation of Supplies by Sea Alternate III 252.203-7996 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation252.203-7997 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements252.204-7003 Control of Government Personnel Work Product252.204-7004 Alt A System for Award Management252.204-7008 Compliance with Safeguarding Covered Defense Information Controls252.204-7011 Alternative Line Item Structure252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting252.204-7015 Disclosure of Information To Litigation Support Contractors252.209-7991 Representation by Corporation Regarding an Unpaid Delinquent Tax liability or a Felony Conviction under any Federal Law-Fiscal Year 2016 Appropriations252.215-7007 Notice of Intent to Resolicit252.215-7008 Only One Offer252.223-7008 Prohibition of Hexavalent Comium 252.225-7000 Buy American Act - Balance of Payments Program Certificate252.225-7001 Buy American Act and Balance of Payments Program252.225-7002 Qualifying Country Sources as Subcontractors252.225-7048 Export-Controlled Items252.232-7003 Electronic Submission of Payment Requests And Receiving Reports252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies On Contract Payments252.244-7000 Subcontracts For Commercial Items And Commercial Components (DoD Contracts)252.247-7023 Transportation of Supplies by Sea Alternate III Procedures in FAR 13.106 are applicable to this procurement. Contract Award will be made to the lowest price technically acceptable Offeror. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. All quotes shall be submitted via Microsoft Word or Excel spreadsheet and must include price(s), FOB point, a point of contact, name and phone number, business size, and payment terms. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. Responses to this solicitation are due by 11:00AM EST on September 18, 2017. Offers shall be emailed to Mr. Wendell Davis at wendell.davis@navy.mil. N50054-17-R-0023 Department of the Navy Naval Sea Systems Command
9/11/17, 1:28 PM Sideport Shell Doors
Added: Aug 10, 2017 3:07 pm This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to determine if there are any small business sources which are capable of satisfying the agency's requirements. Pursuant to FAR Part 13 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the Mid-Atlantic Regional Maintenance Center, Norfolk, VA to identify sources capable of providing the following: •· Swing-Arm Weldment; P/N: J15861060-1; QTY: 2 EA•· Swing-Arm Weldment; P/N: J15861060-2; QTY: 2 EA•· Idler Arm Weldment R.H. ; P/N: J15861060-2; QTY: 2 EA•· Idler Arm Weldment L.H. ; P/N: J15861090-3; QTY: 2 EA•· Bushing: P/N: JM1620-8; QTY: 16 EA•· Door Idler Support Weldment: P/N: J15861080-1; QTY: 4 EA•· Idler Arm Rod Eye; P/N: J15861090-2: QTY: 4 EA•· Bushing: P/N: JM1620-12; QTY: 4 EA•· Top Center Hinge Weldment; P/N: J15861070-2; QTY: 4 EA•· Lower Center Hinge Weldment; P/N: J15861070-1; QTY: 4 EA•· Motor Drive Shaft; P/N: J15862097-PC1; QTY: 8 EA•· Pin, Cotter; P/N: J51402-12-5; QTY: 16 EA•· Roll, Pin; P/N: J51604-16-S316; QTY: 16 EA•· Bearing Holder; P/N: J15862097-PC11; QTY: 8 EA•· Bearing Holder; P/N: J15862097-PC10; QTY: 8 EA•· Counter Balance Valve Door; P/N: J15866012-1; QTY: 8 EA•· Plate Steel; P/N: J15862097-PC16; QTY: 16 EA•· Hinge Cap; P/N: J15862097-PC17; QTY: 8 EA•· Door Guide Assembly; P/N: J15861700-1; QTY: 2 EA•· Cotter Pin: P/N: J51403-16-S; QTY: 4 EA **Note: Parts are reference by Jered, LLC part numbers. Gulf Coast Holding, Inc. is the original equipment manufacturer (OEM) of the currently installed Sideport Shell Doors. The parts provided must be compatible in all aspects (form, fit, function) with existing systems presently installed. Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. All responses must include the following information: Company Name; Company Address; Company Business Size; and Point-of-Contact (POC) name, phone, fax number, and e-mail address. This synopsis is published for informational purposes and does not constitute a request for competitive proposals. Interested parties may identify their interest and capability by submitting a written response to wendell.davis@navy.mil no later than 5 days after the date of the publication of this notice. The written response shall reference RFP# N50054-17-R-0023 and provide a capability statement that clearly indicates the firm's experience, assets, background, and ability to perform the required work without compromising quality, accuracy, reliability and schedule. The capability statement shall be submitted in MS WORD or Adobe PDF form as an email attachment. The Government will consider all capability statements received prior to the closing date of this synopsis. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete the proposed contract based upon responses to this notice is solely within the discretion of the Government. There are no commitments by the Government to issue any solicitations, make an award or awards, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contact. No telephone responses will be accepted. No hard copies of the solicitation will be mailed. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation. N50054-17-R-0023 Department of the Navy Naval Sea Systems Command
8/10/17, 3:07 PM