Purchase Order FA822422P0037
Award Date
8/30/22
Potential Completion Date
11/7/22
Potential Value
$372K
Funding Federal Agency
Ogden Air Logistics Complex
Contracting Federal Agency
Air Force Sustainment Center
Awardee
Engitype LLC
Ultimate Awardee
Not listed
NAICS Category
333244 - Printing Machinery and Equipment Manufacturing
PSC Category
3695 - Miscellaneous Special Industry Machinery
Set-Aside Type
Total Small Business
Federal Contract Vehicle
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Gig Harbor, WA, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
3
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The Department of the Navy Naval Sea Systems Command awarded a firm-fixed price purchase order contract to Engitype LLC, a small business provider of 3D printing products and services based in Gig Harbor, Washington. The $244,790.00 contract is for the delivery of MARKFORGED FX20 3D printers. The award was made under a total small business set-aside and references a prior solicitation from the Defense Logistics Agency's Maritime Puget Sound office. Engitype has previously supported other...
The Department of the Air Force awarded a firm fixed-price purchase order to Goengineer LLC, a small business limited liability company, for the delivery of a FORTUS 450 MC 3D printer and related materials and services. The $249,775.00 contract has a completion date of July 31, 2020 and will support equipment maintenance programs at Joint Base Lewis-McChord in Washington. Goengineer LLC has prior experience providing 3D printing equipment, scanning systems, software, and services to various...
The Department of the Air Force Materiel Command Ogden Air Logistics Complex awarded a $479k firm fixed price purchase order to Stratasys, Inc. to provide a POLYJET 3D PRINTER that will be used at Hill Air Force Base Innovation Center to produce prototypes, fit checks, tools, and fixtures for use on aircraft and/or weapons systems. The printer will be delivered to and utilized at the place of performance in Eden Prairie, Minnesota over a three month period concluding in late September 2022.
The U.S. Department of the Air Force Materiel Command Ogden Air Logistics Complex awarded a firm-fixed-price purchase order to Goengineer LLC, a for-profit limited liability company, to provide two small 3D prototype printers that can print engineering-grade thermoplastic materials. The total potential value of the award is $123,733.00, and the work will be performed at Hill Air Force Base in Utah. The purchase order was set aside for small businesses. Goengineer LLC has experience supporting...
The Department of the Air Force Materiel Command awarded a firm fixed-price purchase order to Goengineer LLC, a for-profit limited liability company, to provide a 3D printer. The contract has a potential value of $242,798.00 and a completion date of August 10, 2017. The contract was set aside for small businesses. Goengineer LLC is a provider of 3D printing products, 3D scanning equipment, design software, and related services, supporting federal agencies ranging from the Departments of the...
Stratasys, Inc. was awarded a $549,900 definitive contract by the Department of the Air Force Materiel Command Ogden Air Logistics Complex to provide one Stratasys F900 3D printer to the 309th Maintenance Complex located at Hill Air Force Base, Utah. The firm fixed price contract is for the delivery of the requested 3D printer and has a period of performance from September 21, 2020 through October 25, 2020. The Ogden Air Logistics Complex will utilize the 3D printer to support maintenance...
The Department of the Air Force awarded a $590,700 firm fixed price purchase order to Open Additive, LLC for a 3D metal printer to meet the requirements specified in the FA860122R0018 solicitation issued by the Air Force Materiel Command Lifecycle Management Center. The solicitation sought proposals for an additive metal 3D printer with a build volume of not greater than 6x6x10 inches and the ability to heat the build plate to 500 degrees Celsius, to be delivered to and installed at the Air...
The Department of the Air Force Materiel Command Ogden Air Logistics Complex awarded a $449,462.50 firm fixed price purchase order contract to Stratasys, Inc. to provide a SLA 3D printer that will be used at the Hill Air Force Base Innovation Center to produce masking aides, rapid prototypes, fit checks, tools, and fixtures for use on aircraft and weapon systems. The 3D printer will be located in Eden Prairie, Minnesota and the period of performance is from June 28, 2022 through August 9, 2022.
This federal contract award, with ID FA302024P0025, was issued by the Air Education and Training Command (AETC), a defense agency, to Goengineer LLC, a for-profit limited liability company. The $128,059.25 firm fixed-price purchase order is for a 982 MXS Prime Resin Printer System, with a completion date of March 31, 2024. Goengineer LLC is an experienced government contractor that specializes in providing 3D printing products, 3D scanning equipment, design software, and related services to...
The U.S. Department of the Air Force Air Education and Training Command has awarded a firm-fixed-price purchase order for a 3D printer to Intellipeak Solutions Inc., a minority-owned, veteran-owned small business. The potential value of the contract is $79,929.34, and the completion date is August 30, 2022. The 3D printer is required to have specific capabilities, including material extrusion technology, a build volume between 440-460 mm in each dimension, a travel speed range of 475-525 mm/s,...