Purchase Order FA700022P0048
Award Date 9/30/22
Potential Completion Date 9/29/23
Potential Value $14K
Federal Agency
Ultimate Awardee
NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Air Force Academy, CO 80840, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The U.S. Air Force Academy awarded a $79,000 firm-fixed-price definitive contract to 3D Systems, Inc., a subsidiary of 3D Systems Corporation, for the annual maintenance of an SLA ProJet 7000 3D printer. The contract includes two preventative maintenance visits, unlimited phone/application/remote technical support, software/firmware updates, and next business day shipping. This sole-source award was made without any set-aside, as 3D Systems was determined to be the only qualified source to...
- This is a $249,000.00 firm fixed-price purchase order contract awarded by the U.S. Air Force Academy to 3D Systems, Inc., a for-profit manufacturer of 3D printing solutions, for a high-precision stereolithographic (SLA) 3D printer. The contract does not have a set-aside designation. The 3D printer will be used by the Academy's Department of Aeronautics to rapidly prototype highly accurate models for cadet capstone and research programs. This award was a sole-source contract, as the government...
- The U.S. Air Force awarded a $39,980.00 Firm Fixed Price purchase order contract to 3D Systems, Inc. for the provision of 3D systems material and accessories for 3D printers to support the Maintenance Support Division at Hill Air Force Base in Utah. The contract runs through September 29, 2024. 3D Systems, Inc. is a subsidiary of 3D Systems Corporation, a leading provider of 3D printing solutions to the federal government. The contract does not have a set-aside designation. 3D Systems has a...
- This is a firm fixed-price purchase order contract awarded by the Air Force Research Laboratory (AFRL) to 3D Systems, Inc. for a PROX DMP 300 service plan. The contract has a ceiling value of $98,072.00 and a completion date of May 31, 2022. 3D Systems, Inc. is a subsidiary of 3D Systems Corporation, a leading provider of 3D printing solutions to the U.S. federal government. The contract does not have a set-aside designation. Through this agreement, 3D Systems will provide maintenance and...
- The Department of the Air Force Materiel Command awarded a $499,475 firm fixed price purchase order to 3D Systems, Inc. for large area precision manufacturing equipment. 3D Systems, Inc. will deliver the requested products to the Air Force's Oklahoma City location by July 2023. As a total small business set aside, only bids from small businesses were considered for this award. 3D Systems, Inc. is a manufacturer of goods and is a subsidiary of 3D Systems Corporation. The equipment will likely...
- 3D Systems, Inc. has been awarded a $16.5K firm fixed-price purchase order for an annual service plan covering the ProJet MJP 3600W 3D printer system. The contract, awarded August 1, 2024, is scheduled for completion by July 31, 2025, and will be performed in Rock Hill, South Carolina. This contract was not issued under a small business set-aside designation and is funded through a civilian federal agency's Shared Services Center, reflecting 3D Systems' competitive position in the unrestricted...
- This is a $618,205.00 firm fixed-price purchase order awarded by the TACOM Life Cycle Management Command, a defense agency, to 3D Systems, Inc., a for-profit manufacturer of 3D printing solutions. The contract is for the delivery of 3D printers and has no set-aside designation. 3D Systems is an experienced federal contractor, holding a $975 million Indefinite Delivery Contract with the U.S. Air Force's Rapid Sustainment Office for a wide range of 3D printing equipment, software, materials, and...
- The U.S. Department of the Army Materiel Command Research Development and Engineering Command has awarded a $875,250.00 firm-fixed-price purchase order to 3D Systems, Inc., a for-profit manufacturer of 3D printing equipment, materials, and related software and services. The contract is for the procurement of a PROX DMP 320 3D printing system manufactured by 3D Systems, with no labor hours included. The contract is not set aside for any small business program. 3D Systems has a history of...
- This federal contract award to 3D Systems, Inc., a subsidiary of 3D Systems Corporation, is for the maintenance and renewal of a 3D printer (Model: ProJet 3600W MAX) for the Shared Services Center, a federal agency. The award, valued at $16,500.00, has a period of performance ending on July 31, 2024. The contract is a Firm Fixed Price Purchase Order, with no set-aside designation. 3D Systems is a leading provider of 3D printing solutions to the U.S. federal government, offering a wide range of...
- This is a firm-fixed price purchase order contract awarded by the Ogden Air Logistics Complex, a subordinate unit of the U.S. Air Force, to 3D Systems, Inc. The $43,472.00 contract is for the replacement of a laser head on a PROX 950 3D printer located at the Reverse Engineering, Advanced Manufacturing, Prototyping, and Innovation Design Innovation Center at Hill Air Force Base in Utah. The contract does not have a set-aside designation. 3D Systems, Inc. is a leading provider of 3D printing...