Purchase Order 80NSSC26P1379
Award Date 8/20/26
Potential Completion Date 1/21/27
Potential Value $38K
Federal Agency
Awardee
Ultimate Awardee
Not listed PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Union, NJ 07083, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- NASA's Shared Services Center awarded a purchase order to Precision Measurements and Instruments Corporation for $45,150 on April 21, 2026, for advanced mechanical testing of fabrics and plastics at cryogenic temperatures. No set-aside applied. Work is performed in Corvallis, Oregon. The order requires mechanical characterization testing—puncture, tear, and tensile testing—of 166 pre-cut fabric and polymer specimens at -143°C in compliance with specified ASTM standards, using a United Testing...
- The NASA Shared Services Center awarded a purchase order to Illinois Tool Works Inc., Instron Division, for an Instron Model 68FM-300 test frame valued at $247,279.00 on April 14, 2026. The order is firm fixed price with no set-aside designation. Place of performance is Norwood, Massachusetts. The procurement covers delivery of the floor-mounted materials testing system (300 kN force capacity) with installation and verification services at NASA Kennedy Space Center, three additional static...
- NASA's Shared Services Center awarded a purchase order to TPS LLC (doing business as Thermal Product Solutions) for $27,513.00 on June 25, 2026, for one standard Tenney TJR test chamber. The order was issued without a set-aside as a sole-source commercial item acquisition under FAR 12.102(a). Performance occurs at NASA Goddard Space Flight Center, Building 22 Room 070A, in New Columbia, Pennsylvania. The requirement calls for modifying a standard Tenney TJR thermal test chamber to support...
- This is a $160,710.00 firm fixed price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Illinois Tool Works Inc. (ITW) through its Instron division. The contract is for the delivery, installation, integration, verification, and operator training of an Instron Model 68TM-50 Table Mounted Materials Testing System with a 50 kN force capacity. This specialized materials testing equipment will be used at the NASA Glenn Research Center. The...
- NASA's Shared Services Center awarded a purchase order to Amteco Inc. for $40,865.00 on August 27, 2025, under a total small business set-aside. The order calls for high-temperature furnaces for mechanical testing of GRX-810 metal alloys. Work is performed at Glenn Research Center's Materials & Structures Division in Cleveland, Ohio, with place of performance at Middleco, Ohio. The furnaces must operate at up to 1400 degrees Celsius with two independently controllable heating zones, split...
- This federal contract award is for a CUSTOM CRYOGENIC THERMAL CHAMBER valued at $38,595.00. The contract was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Temptronic Corporation, a for-profit manufacturer of thermal test equipment and systems. The award is a Firm Fixed Price Purchase Order with a completion date of January 23, 2025. The original solicitation was a Special Notice issued by NASA, indicating their intent to award a sole source...
- NASA's Shared Services Center awarded a $104,565 firm fixed-price purchase order to Illinois Tool Works Inc.'s Instron division for an 8800MT Controller Upgrade of an existing Instron 600KN-SPL load frame system. This sole-source contract, awarded on September 16, 2025, with completion targeted for May 29, 2026, encompasses a comprehensive controller replacement including an 8800 MMT Digital Control system, Dell computer equipment, WaveMatrix3 Dynamic Testing Software, and various control...
- <p>The NASA Shared Services Center awarded a purchase order to Illinois Tool Works Inc. (Instron Division) for $15,740 on September 10, 2025, to calibrate Instron mechanical test frames. Performance is in Cleveland, Ohio, with an ultimate completion date of October 10, 2025. The order is firm fixed price with no set-aside applied.</p>
- NASA awarded a $384,048 purchase order to Zwickroell, LP for a high temperature air tension tester to be delivered to NASA's Glenn Research Center in Cleveland, Ohio. The contract, awarded on September 1, 2026, reflects NASA's ongoing need for specialized materials testing equipment to support aerospace research and development initiatives. As a precision materials testing equipment supplier based in Kennesaw, Georgia, Zwickroell has demonstrated extensive experience delivering sophisticated...
- NASA's Shared Services Center awarded a purchase order to Thermtest Inc. for a THERMTEST MP-1 Upgrade valued at $80,567.00 on August 4, 2026. The contract procures one MP-1 controller system with high sensitivity Wheatstone Bridge touch-screen controller, 4-channel sensor switch, and Windows MP-1 software; a TPS-TP-4 Temperature Platform with LN2 control extending minus 160 to 300 degrees Celsius; two TPS-K Double Spiral Sensors rated to 300 degrees Celsius; online training from a Thermtest...