Purchase Order 80NSSC26P0942
Award Date 7/7/26
Potential Completion Date 9/1/26
Potential Value $44K
Federal Agency
Awardee
Ultimate Awardee
Not listed PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Huntsville, AL 35812, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- NASA's Shared Services Center awarded a $9,100 firm fixed-price purchase order to Seventh Genius LLC (doing business as DC Supplies) on September 9, 2025, for the fabrication of metal plates to support the 20" Mach 6 spare heater bundle project at NASA Langley Research Center in Hampton, Virginia. The contract requires precision-cut metal components in two materials: Stainless Steel 304 plates in three specified sizes and Nickel 200 B162 plates in two dimensions, all meeting strict...
- The NASA Shared Services Center awarded a purchase order to Porous Metal Filters Inc. for face sheets for 9x15 acoustic boxes, valued at $83,189.10, on April 21, 2026. Work is performed in Spring, Texas. The order covers 50 acoustic face sheet panels—25 panels measuring 48.5" x 48.5" in 20 gauge thickness and 25 panels of the same dimensions in 16 gauge thickness—each fabricated from 304L stainless steel perforated plate with integrated 200x600 diffusion-bonded wire mesh for wind...
- NASA's Shared Services Center awarded a purchase order to Amteco Inc. for $40,865.00 on August 27, 2025, under a total small business set-aside. The order calls for high-temperature furnaces for mechanical testing of GRX-810 metal alloys. Work is performed at Glenn Research Center's Materials & Structures Division in Cleveland, Ohio, with place of performance at Middleco, Ohio. The furnaces must operate at up to 1400 degrees Celsius with two independently controllable heating zones, split...
- NASA's Shared Services Center awarded a $47.5K purchase order to North American Manufacturing Pros LLC, a small disadvantaged business located in Ardmore, Alabama, for a two-month rental of an EOS M280 additive manufacturing machine. Under this firm fixed-price contract, the vendor will provide laser powder bed fusion (LPBF) equipment and services to support NASA's advanced materials research and development efforts. The work involves printing specified metal components using NASA-supplied...
- The Shared Services Center (a NASA civilian organization) issued a purchase order to Elementum 3D, Inc. for $211,266.00 on June 30, 2026, for development builds of low overhang turbine blades with minimal dross and supports, with completion by November 30, 2026. No set-aside was used. The procurement originated as a sole-source Special Notice posted June 15, 2026. Work is performed in Huntsville, Alabama. Elementum 3D will conduct precision laser powder bed fusion additive manufacturing of...
- <p>NASA's Shared Services Center awarded a purchase order to Photomachining, Inc. for $35,884.00 on January 20, 2026, for picosecond laser processing system upgrade and installation. The award stems from a Total Small Business set-aside Special Notice posted January 13, 2026 (due January 16, 2026). Work is performed in Pelham, New Hampshire, with completion targeted for September 20, 2026. The order is firm fixed-price with no further pricing adjustments.</p>
- The NASA Shared Services Center awarded a purchase order to Precision Filters, Inc. for a 4-card mainframe with power supply and control card on September 16, 2024, with a firm fixed-price ceiling of $179,800. Performance takes place in Ithaca, New York, with an ultimate completion date of March 16, 2026. The procurement was conducted under FAR Part 13 simplified acquisition procedures as a commercial item. The originating solicitation was issued as a Special Notice on September 11, 2024, posted...
- NASA's Shared Services Center awarded a $160,000 firm fixed-price purchase order to Product Evaluation Systems, LLC for high temperature oxide dispersion strengthened (ODS) alloy mechanical testing. The contract, effective March 17, 2026 with completion by July 7, 2026, supports NASA's Marshall Space Flight Center (MSFC) in validating material properties for three NASA-developed ODS alloys: GRX-810, ORCAlloy-21, and Alloy 754-ODS. Product Evaluation Systems, a specialized metallurgical testing...
- NASA's Shared Services Center awarded a $16,748 firm fixed-price purchase order to Photomachining, Inc. for photomachining annual service maintenance renewal in fiscal year 2025. The contract, which carries an ultimate completion date of July 31, 2026, represents a continuation of the agency's ongoing relationship with the Pelham, New Hampshire-based contractor. No set-aside designation was applied to this award. Photomachining, Inc., a Subchapter S Corporation specializing in high-precision...
- NASA's Shared Services Center awarded a purchase order to North American Manufacturing Pros LLC for $349,840 on March 20, 2026, for powder bed fusion development of oxide dispersion strengthened alloys. The company is a self-certified small disadvantaged business. Work is performed in Ardmore, Alabama. The order is firm fixed-price with an ultimate completion date of December 20, 2026, and covers advanced additive manufacturing services including laser powder bed fusion processing, alloy...