Purchase Order 80NSSC26P0477

<p>The Shared Services Center awarded a purchase order to Torquemeters LIMITED for $19,663.44 on February 24, 2026. The order covers torquemeter signal processor units, cables, and inspection and repair services. Work is performed in Northampton NN6, United Kingdom, with an ultimate completion date of April 21, 2026. Pricing is firm fixed price with no small business set-aside applied.</p>

The Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. for $3,400.00 on April 24, 2026. The order is firm fixed price with no set-aside designation. The order procures a mechanical puller used to extract the rear bearing cage from an Allison T56A-7 gas turbine engine. The puller features a four-arm aluminum construction with a T-handle, measures 7 inches in length, incorporates a 1/2-20 NF threaded forcing screw, and is furnished with four 1/4-28 NF threaded...

<p>The Department of Defense, Land and Maritime, issued a purchase order to H &amp; S Tool And Engineering, Inc., a small business, for a shouldered shaft on March 31, 2026, with a ceiling value of $6,800. Performance occurs at the vendor's Fall River, Massachusetts facility. The order is firm fixed price with an ultimate completion date of August 28, 2026.</p>

<p>The Department of Defense Aviation issued a delivery order to Canadian Commercial Corporation on March 9, 2026, for a power turbine shroud, with a ceiling value of $31,588.62 and ultimate completion by November 4, 2026.</p> <p>Place of performance is Longueuil, Quebec, Canada. The order is firm fixed price with no set-aside applied.</p>

<p>The Department of Defense Aviation entity awarded a purchase order to Ordnance Technology Service, Inc., a small business manufacturer, for $15,616.00 on March 10, 2026. The order procures a vane assembly for compression equipment. Work is performed in Concord Township, Ohio, with an ultimate completion date of April 14, 2027. The order carries firm fixed pricing and no set-aside designation.</p>

<p>The Shared Services Center issued a purchase order to Carolina Ground Service Equipment Inc. on March 31, 2026, for an air data accessories kit (part number ADAG5-834HT, quantity 1 each) valued at $15,635.57 on a firm fixed price basis. Work is performed in New Bern, North Carolina, with an ultimate completion date of April 6, 2026. No small business set-aside was applied to this acquisition.</p>

<p>The Shared Services Center awarded a purchase order to Conti Tool &amp; Die, Inc. for test hardware for surface docking system seals, with a ceiling value of $20,235.00, on December 22, 2025. Work is performed in Akron, Ohio, with an ultimate completion date of April 30, 2026. The order is firm fixed price and carries no set-aside designation.</p>

<p>The Federal Acquisition Service issued a purchase order to LC Industries Inc. on April 24, 2026, with a ceiling value of $2,435.00. No set-aside was used. The order is firm fixed price. Place of performance is Durham, North Carolina. Ultimate completion is scheduled for June 23, 2026. The source does not specify the item or service being purchased.</p>

The Shared Services Center awarded a purchase order to Northrop Grumman Systems Corporation on June 1, 2026, for Mach 6 nozzle redesign, with a ceiling value of $87,384.00 and a firm fixed price. Work is performed at Elkton, Maryland, with an ultimate completion date of September 30, 2026. The effort involves modifying an existing Mach 6 nozzle design by adding shelf features to blade inserts to prevent inward motion, with deliverables including 3D models in STEP format, preliminary drawings due...

The Balancing Company Inc. has been awarded a firm fixed-price purchase order valued at $16.2K by a civilian federal agency operating under the Shared Services Center designation. The contract, awarded on August 20, 2025, calls for impeller-burst-spin test-to-failure testing of turbines, with performance scheduled for completion by September 24, 2025. Work will be performed at the contractor's facility in Vandalia, Ohio. This award was not issued under any small business set-aside program. The...