Purchase Order 80NSSC20P1341
Award Date 6/17/20
Potential Completion Date 10/15/20
Potential Value $156K
Federal Agency
Ultimate Awardee
NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Hamilton, OH 45011, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The National Aeronautics and Space Administration (NASA) Marshall Space Flight Center awarded a firm fixed-price purchase order to General Electric Company, through its GE Additive division, to provide one Concept Laser X-Line 2000R additive manufacturing machine to support the Liquid Engine Office (LEO) Development program for the RS25 liquid rocket engine. The contract has a potential value of $700,000.00 and a completion date of December 30, 2020. The procurement was not set aside for any...
- This $174,800 firm fixed price purchase order was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to the General Electric Company (GE), through its GE Additive division, for an extended warranty on Concept Laser equipment. GE Additive provides additive manufacturing hardware, software, services, and capabilities to various Department of Defense and NASA organizations. This award is not associated with a larger contract vehicle, and no small business...
- The U.S. National Aeronautics and Space Administration (NASA) Shared Services Center awarded a $199,700.33 firm fixed price purchase order to General Electric Company (GE), through its GE Additive division, for an extended warranty on Concept Laser equipment. This award is not associated with any larger contracting vehicle. No set-aside designation was used. As a provider of additive manufacturing hardware, software, and services, GE Additive has supported various Department of Defense...
- This federal contract award is for an extended warranty on a GE Additive XLine 2000R additive manufacturing machine, valued at $135,000.00. The contract was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to General Electric Company's GE Additive division. The contract is a firm fixed-price purchase order with a completion date of February 16, 2025. No set-aside was used for this award. This contract is likely part of NASA's broader efforts to support...
- This firm fixed-price purchase order was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to General Electric Company (GE), through its GE Additive division, for extended warranty service on Concept Laser M1, M2, and XLine metal additive manufacturing machines. The potential value of the contract is $151,305.00 and the completion date is February 12, 2020. GE Additive has provided additive manufacturing hardware, software, and services to various...
- This is a firm fixed price purchase order contract awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to the General Electric (GE) Company's GE Additive division. The contract is for an extended warranty on a GE Additive XLine 2000R additive manufacturing machine. The total ceiling value of the contract is $140,900.00, and the performance location is Hamilton, Ohio. The contract was awarded on a sole source basis without a set-aside, as GE Additive was...
- This is a $86,848.00 firm fixed price purchase order awarded by the National Aeronautics and Space Administration (NASA) to Additive Manufacturing & Engineering, Inc., a HUBZone certified small disadvantaged business, for the additive manufacturing of GRCOP-42 hardware for a combustion test facility. The purchase order was issued on a sole source basis under FAR Part 12 and 13 procedures, as Additive Manufacturing & Engineering, Inc. was determined to be the sole provider of the required...
- This federal contract was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to General Electric Company (GE), through its GE Aviation division operating as GE Edison Works. The $201,000.00 firm-fixed-price purchase order is for the development of a C-C Nozzle, with a completion date of October 2, 2020. This sole-source award was made without a set-aside designation, under the authority of FAR 13.106-1(b)(1)(i), as GE was determined to be the sole provider...
- The National Aeronautics and Space Administration (NASA) Glenn Research Center awarded a Cost Plus Fixed Fee delivery order to General Electric Company (GE) for the development of a "Cutting Edge High Temperature Material" on April 25, 2018. The potential value of the contract is $1,207,160.16 and the performance period ends on December 31, 2020. This award was not set aside for any small business categories. GE, a large for-profit manufacturer, will perform the work through its GE...
- This is a $135,055.33 firm fixed price purchase order contract awarded by the Department of the Navy Naval Sea Systems Command to General Electric Company's GE Additive division. The contract is for a GE metal additive machine upgrade, with a completion date of April 30, 2024. The original solicitation was an unset-aside commercial item procurement, for which GE was awarded a sole source contract. GE Additive is a division of the General Electric Company that provides metal additive...