Centrifugal Pump
Added: May 10, 2018 5:08 pm The United States Coast Guard Surface Forces Logistics Center has a requirement and is requesting quotations for the following part:Item 1) NSN: 4320-01-481-4914PUMP UNIT, CENTRIFUGALVERTICALLY MOUNTED INLINE CENTRIFUGAL PUMP UNITPUMP MODEL: 3186, VA70-E, 4X3X9-1/2 PUMP WITH AN 8.625 DIAMETER IMPELLER. CONSTRUCTION: BRONZEMECHANICAL SEAL: CHESTERTON 442-17 SA 678326 SPLIT TYPE.INCLUDES: 316SS JOHN CRANE CYCLONE SEPERATOR AND RECIRCULATION TUBING. RATE FLOW: 500 GPM WITH 280FT TDH, BASE ON CRANE DEMING PERFORMANCE CURVE # 3180-PC2928.MOTOR DATA: 75 HP CONTINUOUS DUTY, 3500 RPM, 440 VAC, 3 PHASE, TOTALLY ENCLOSED FAN COOLED (TEFC). ROTATION: CLOCKWISE, NEMA C FACE, FRAME 365TCZ. MOTOR TO BE IN ACCORDANCE WITH IEEE45 & 46 CFR 111.25 AND INCLUDE A 316 GRADE STAINLESS STEEL SHAFT. MOTOR PROVIDED WITH GREASE LUBRICATED BEARINGS, EQUIPPED WITH A DRIP COVER, LIFT EYE BOLTS OR LUGS AND A 115 VAC SINGLE PHASE ANTI CONDENSATION STRIP HEATERA) PUMP SHALL CONFORM TO PREVIOUSLY ORDERED PUMP SERIAL # DC-605974-79 WITH THE EXCEPTION THAT A 316 SS SHAFT SLEEVE P/N 0068213 SHALL BE INSTALLED IN LIEU OF BRONZE.B) MOTOR SHALL BE POSITIONED WITH ELECTRICAL CONNECTION BOX TO BE IN LINE WITH SUCTION FLANGEC) IMPELLER MATERIAL SHALL BE 316 SSTOEM: CRANE DEMING PUMPS PART NUMBER: 3186-9534-USCGQTY: 1 EACRATING REQUIREMENTS FOR PUMP UNIT, CENTRIFUGAL, NSN 4320-01-481-4914EACH PUMP UNIT SHALL BE INDIVIDUALLY PACKAGED IN ITS OWN WOODEN FRAMED CONTAINER USING 2X4 LUMBER FOR FRAMING AND ½" PLYWOOD FOR THE REMAINDER. ALL CORNERS SHALL HAVE 14 GAUGE 1 ½"X 1 ½" SLOTTED ANGLE ON ALL FOUR CORNERS OF THE OUTSIDE OF THE CRATE. MATERIAL SHALL BE GALVANIZED. THE CRATES SHALL HAVE 2 ZINC PLATED 3 3/8" X 2 7/8" SURFACE MOUNTED FOLDING PULL HANDLES PLACED ONE ON EACH SIDE OF THE CRATE WITH A 1/8" STEEL BACKER PLATE ON THE INSIDE OF THE CRATE LID. THE PUMP UNIT SHALL BE SECURELY BOLTED TO A SKID USING 2X6 SOLID LUMBER BOLTED TO 4X4 LUMBER. THE 4X4 LUMBER SHALL FACILITATE FORK TRUCK LIFTING ON THE SIDE OF THE CRATE. THE LID OR COVER SHALL BE ATTACHED USING 3 LAG BOLTS ON EACH OF THE FOUR SIDES. THE LAG BOLTS SHALL HAVE A 2" RED SPRAY PAINTED SQUARE TO MAKE LID REMOVAL IDENTIFICATION EASY. A ¾" RED STENCIL SHALL BE PAINTED ON BOTH SIDES WITH THE WORDS "REMOVE LAG BOLTS IN RED SQUARES THEN LIFT THE LID". THE CONTAINER SHALL BE FRAMED ON THE INSIDE USING SOLID WOOD AS FRAMING MATERIAL. THE CONTAINER SHALL BE CAPABLE OF PROTECTING THE PUMP UNIT FROM DAMAGE DURING MULTIPLE SHIPMENTS BY COMMERCIAL CARRIERS AS PER ASTM D3951.The items are used on various US Coast Guard vessels. All items shall be individually packaged and marked IAW the above packaging requirements. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment.Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21226NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY.Brand Name part is mandatory to be considered for award, offers of "equal" products must meet the salient physical, functional, or performance characteristic specified in this solicitation and USCG will determine if alternate part is acceptable.This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-97 (Jan 2018) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333914 and the business size standard is 750. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply.The U.S. Coast Guard intends to award on all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award on a Firm Fixed Price Contract.All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with System for Award Management (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is May 16, 2018 at 10:00 am. Eastern Standard Time.OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE:Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 tough 3009.104-73;__ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 tough 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or__it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 tough 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal._HSAR 3052.209.70 Prohibition on contracts with corporate expatriates (June 2006)(End of provision)The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Jan 2017); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Nov 2017) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Jan 2017); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Nov 2017). The following clauses listed within FAR 52.212-5 (Nov 2017) are applicable: FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016)(Pub.L. 109-282)(31 U.S.C. 6101 note); FAR 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15U.S.C. 644); FAR 52.219-28, Post Award Small Business Program Representation (Jul 2013)(15 U.S.C. 632(a)(2)); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Apr 2015); FAR 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246); FAR 52.222-36 Affirmative Action for Workers with Disabilities (Jul 2014) (29 U.S.C. 793); FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225-1, Buy American Act-Supplies (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-3, Buy American Act-Free-Trade Agreement (May 2014)(41, U.S. C. 10a-10d), Far 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008), FAR 52.232-33, Payment by Electronic Funds Transfer-System for Award (Jul 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov.CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf 70Z08018QAG332 Department of Homeland Security US Coast Guard
5/10/18, 5:08 PM