Purchase Order 47QSSC26P258A
Award Date 7/10/26
Potential Completion Date 9/8/26
Potential Value $3.4K
Federal Agency
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Kansas City, KS 66105, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. for $3,400.00 on April 24, 2026. The order is firm fixed price with no set-aside designation. The order procures a mechanical puller used to extract the rear bearing cage from an Allison T56A-7 gas turbine engine. The puller features a four-arm aluminum construction with a T-handle, measures 7 inches in length, incorporates a 1/2-20 NF threaded forcing screw, and is furnished with four 1/4-28 NF threaded...
- The General Services Administration (GSA) awarded Mid-Continent Machining Inc. a $739,000 firm fixed price purchase order to provide mechanical pullers. The pullers will have a spread range of 3-1/2 to 12-3/4 inches, reach of 4-1/2 to 22-1/2 inches, and leg lengths consisting of two each of the following sizes: 4-1/2, 9-1/2, 16-1/2, and 22-1/2 inches. The pullers will be made of steel with a phosphate coating and manufactured in Kansas City, Kansas over a performance period from October 2026...
- <p>The Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. for $1,445.00 on July 10, 2026, with ultimate completion by August 9, 2026. The order covers a gage and rigging assembly per U.S. Army Missile Command drawing 13025007, Rev. D, dated April 26, 1996, with exceptions applying. Performance occurs in Kansas City, Kansas. Pricing is firm fixed price with no set-aside designation.</p>
- <p>The General Services Administration's Federal Acquisition Service issued a purchase order to Mid-Continent Machining Inc. on May 14, 2026, for an extractor tool and borescope plug (Pratt & Whitney Aircraft Drawing Number PWA 51927, with exceptions) valued at $1,300. Place of performance is Kansas City, Kansas. The order carries a firm fixed price, with ultimate completion by July 13, 2026. No set-aside was used.</p>
- <p>The Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. on May 22, 2026, for $1,712.00 to supply a lifter, road wheel per Army Ordnance Corps specification (Drawing Number 7010355, Revision C, dated December 5, 1974). No set-aside applies. Work is performed in Kansas City, Kansas. The order is scheduled for completion by September 19, 2026, under firm fixed-price terms.</p>
- The General Services Administration (GSA) awarded Mid-Continent Machining Inc. a $562,000 firm fixed price purchase order to supply mechanical pullers. Under the contract, Mid-Continent Machining will provide pullers with a spread range of 3-5/32 inches conforming to GSA drawing number 5120-213-0336, with exceptions. Performance will occur at Mid-Continent Machining's facility in Kansas City, Kansas, over a three month period concluding in December 2023. The funding agency, GSA Federal...
- <p>The Defense Logistics Agency Aviation awarded a purchase order to Mid-Continent Machining Inc. for a universal puller kit on September 29, 2025, with a firm fixed price of $8,148.00 and an ultimate completion date of December 29, 2025.</p> <p>Performance occurs in Kansas City, Kansas. The order procures specialized mechanical pulling equipment for aviation maintenance operations. No small business set-aside applies to this order.</p>
- The Federal Acquisition Service awarded a $7,600 firm fixed-price purchase order to Mid-Continent Machining Inc. for mechanical pullers (MSP 28) on November 13, 2025, with a completion deadline of January 12, 2026. The contract was not designated as a set-aside award. Work will be performed at the contractor's facility in Kansas City, Kansas. Mid-Continent Machining Inc., a precision manufacturing specialist registered in the System for Award Management since April 2017, brings substantial...
- <p>The Federal Acquisition Service issued a purchase order to Mid-Continent Machining Inc. on June 18, 2026, for $2,890.00, with an ultimate completion date of July 18, 2026. The procurement is for a gage and rigging assembly to U.S. Army Missile Command drawing number 13025007, revision D, dated April 26, 1996 (exceptions apply). Place of performance is Kansas City, Kansas. The order carries firm fixed-price pricing and no set-aside designation.</p>
- <p>The General Services Administration awarded a purchase order to Timber Edge Machine Inc. for $1,064.00 on July 2, 2026, for a mechanical puller conforming to U.S. Army Ordnance Corps Drawing 8708874 with phosphate coating (exceptions apply). Place of performance is Stevensville, Montana. The order carries firm fixed-price pricing with an ultimate completion date of August 13, 2026.</p>