Purchase Order 47QSSC26P200F
Award Date 6/18/26
Potential Completion Date 7/16/26
Potential Value $12K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Paramount, CA 90723, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The General Services Administration's Federal Acquisition Service awarded a purchase order to May Tool Inc., a women-owned small business, for a torque multiplier valued at $12,128.00 on May 22, 2026. Performance will occur in Paramount, California. The multiplier is rated for 12,000 foot-pounds of torque capacity with a 10.7:1 gear ratio, 3/4-inch square drive at both ends, overall dimensions not exceeding 19 inches in length, 7-43/64 inches in height, and 13 inches in width, with a minimum...
- May Tool Inc., a small disadvantaged woman-owned business and Department of Transportation-certified Disadvantaged Business Enterprise manufacturer based in Paramount, California, was awarded a firm fixed-price purchase order on February 6, 2026, by the General Services Administration's Federal Acquisition Service. The contract, valued at $11,095.00, is for a torque multiplier with a rated capacity of 12,000 foot-pounds and a 10.7:1 gear ratio, featuring 3/4-inch square drive at both ends and...
- <p>The General Services Administration's Federal Acquisition Service issued a purchase order to May Tool Inc., a women-owned small business, for an electric impact wrench valued at $1,130.00 on June 5, 2026. Performance occurs in Paramount, California, with a completion date of June 26, 2026. This firm fixed-price purchase order carries no set-aside designation.</p>
- The U.S. General Services Administration (GSA) Federal Acquisition Service has awarded a firm fixed price purchase order to Kipper Tool Company, a certified Woman-Owned Small Business (WOSB), for the delivery of a torque multiplier. The item has a maximum overall length of 19 inches, a maximum height of 7-43/64 inches, and a maximum width of 13 inches, with a 3/4-inch square drive on both ends. The torque multiplier has a rated capacity of 12,000 foot-pounds and a gear ratio of 10.7:1, with a...
- The U.S. General Services Administration's Federal Acquisition Service awarded a $2,680.00 firm fixed-price purchase order to Lyev, LLC (doing business as MRO Tool Supply) on September 18, 2025, for the delivery of a torque wrench multiplier. The equipment specified is a 30-inch overall length multiplier with an output capacity of 4,000 foot-pounds and 5,423 Newton-meters, featuring an audible square drive signal. The unit includes a 1-inch internal square drive on the first end and a 1-1/2-inch...
- <p>GSA's Federal Acquisition Service awarded a purchase order to Lyev, LLC for $2,481.10 on June 5, 2026, for a torque multiplier with 3/4-inch square drive (first end internal) and 1-inch external gear (second end), 4-to-1 gear ratio, 2000 foot-pounds torque capacity, 25 inches overall length, steel construction with chrome coating. Work is performed in Roseville, Michigan, with completion by July 5, 2026.</p>
- The General Services Administration's Federal Acquisition Service awarded a firm fixed-price purchase order to May Tool Inc. on April 3, 2026, for a Waukesha Bearing Corp/Sweeney Division multiplier kit torque wrench (Part No. SWE221 or equal) with a ceiling value of $6,445.00. The contract was awarded without set-aside designation, indicating the vendor competed successfully in open federal procurement. Performance will take place in Paramount, California, with an ultimate completion date of...
- <p>The General Services Administration's Federal Acquisition Service awarded a purchase order to May Tool Inc., a women-owned small business, for $4,995.00 on June 5, 2026, for a pneumatic portable drill with straight throttle drive, 2-inch steel drilling capacity, 3/4 or 1-inch nominal pipe air inlet, 40-pound maximum weight, and 310 RPM maximum free speed. Performance occurs in Paramount, California. The order is firm fixed price with an ultimate completion date of June 26, 2026.</p>
- The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a $3,346.24 firm fixed-price purchase order to Kaufman Company, Inc., a Norwood, Massachusetts-based industrial distributor, for a torque wrench multiplier on April 17, 2026. The equipment specified includes a 20-inch overall length multiplier with a torque capacity of 0 to 2,200 foot-pounds (0 to 2,983 newton-meters), featuring a 1/2-inch square drive internal first end and 1-inch external second end with a...
- The General Services Administration's Federal Acquisition Service (FAS) awarded a $7,800 firm fixed-price purchase order to May Tool Inc., a Paramount, California-based small disadvantaged woman-owned business, for the supply of a pneumatic torque wrench. The wrench specifications include an overall length of 14.5 inches (±1 inch), width of 2.75 inches (±0.25 inch), and height of 9 inches (±1 inch), with a pistol grip handle, trigger throttle, straight spindle drive, and male-square spindle...